Chemistry · Unit 4 · Topic 2

Chemical synthesis and design

Choose conditions for yield and rate in the Haber and contact processes, make ethanol two ways, run a hydrogen fuel cell, calculate yields and atom economy, and build polymers, tripeptides and disaccharides from their monomers.

  • 11 lessons
  • 3 h of lessons
  • 13 worked examples
  • 15 hours in the syllabus
0 of 11

Start here

Yield, rate and the Haber process

Lesson 1 of 11 · 18 min

Start the topic

Lessons

11
  1. Yield, rate and the Haber process (up next)

    Explain how the temperature, pressure and catalyst of the Haber process are chosen to balance equilibrium yield against rate, cost and safety, and write the equation for making ammonia.

  2. Sulfuric acid by the contact process

    Write the equations for each step of the contact process and explain the temperature, pressure, excess air and vanadium(V) oxide catalyst used to make sulfur trioxide.

  3. Two ways to make ethanol

    Write the equations for making ethanol by fermenting glucose and by hydrating ethene, explain the conditions of each, and compare the two routes.

  4. Hydrogen fuel cells in acid and alkali

    Write the anode, cathode and overall equations of a hydrogen–oxygen fuel cell with an acidic or an alkaline electrolyte, and compare fuel cells with burning fuel.

  5. Limiting reagents and percentage yield

    Find the limiting reagent, calculate the theoretical yield of a synthesis as a mass or a gas volume at STP, and compare it with the actual yield as a percentage yield.

  6. Analysing yield and rate data

    Read graphs and tables of equilibrium yield and reaction rate against temperature, pressure and catalyst, and use them to justify the conditions an industrial process uses.

  7. Addition polymers from alkenes

    Write equations for making polyethene (LDPE and HDPE), polypropene and PTFE from their monomers, and move between a monomer and its repeating unit.

  8. Condensation polymers: polyesters, nylon and polysaccharides

    Write equations for polyesters, PLA, nylon and polysaccharides formed from their monomers with water released, and find the monomers from a repeating unit.

  9. Tripeptides and disaccharides

    Join amino acids by peptide bonds to construct and name tripeptides with data-book symbols, and join monosaccharides by glycosidic bonds to form disaccharides.

  10. Atom economy and green chemistry

    Calculate the atom economy of a synthesis, compare routes to the same product, and apply the principles of green chemistry, including renewable feedstocks and greener solvents.

  11. Biofuels, industrial enzymes and molecular manufacturing

    Explain why biofuels are being developed, how bioethanol and biodiesel are made from algae, oil seeds, wood waste and waste oils, how enzymes make these syntheses viable, and what molecular manufacturing promises.

  12. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Industrial chemists don't just ask "what reacts?". They ask how to make a product quickly, in high yield, safely, cheaply and with as little waste as possible. This topic is about those decisions.

You'll apply what you know about equilibrium and rates to two of the largest industrial processes on Earth: the Haber process for ammonia, NX2(g)+3 HX2(g)⇌2 NHX3(g)\ce{N2(g) + 3H2(g) <=> 2NH3(g)}, and the contact process for sulfuric acid. You'll compare two routes to ethanol, write the half-equations for a hydrogen fuel cell in acid and in alkali, and calculate theoretical yields, percentage yields and atom economies.

The second half is about building big molecules from small ones: addition polymers such as LDPE, HDPE, polypropene and PTFE, condensation polymers such as polyesters, PLA, nylon and starch, tripeptides from amino acids, and disaccharides from monosaccharides. It ends with green chemistry: biofuels, industrial enzymes and the push to design processes that waste nothing.

Before you start

Builds on Chemical equilibrium systems, Oxidation and reduction, Properties and structure of organic materials and Aqueous solutions and acidity.

  • Collision theory and the factors that change reaction rate: temperature, concentration, pressure, surface area and catalysts (Unit 2).
  • Dynamic equilibrium, Le Châtelier's principle and KcK_c (Unit 3 Topic 1).
  • Galvanic cells, half-equations and standard electrode potentials (Unit 3 Topic 2).
  • Mole calculations: n=mMn = \dfrac{m}{M}, n=V22.7n = \dfrac{V}{22.7} at STP and mole ratios from balanced equations (Units 1 and 2).
  • Structures of alkenes, alcohols, carboxylic acids, esters, amines, amides, amino acids and sugars (Unit 4 Topic 1).

What QCAA says you need to know17 dot points

Chemical synthesis

7 hours

Macromolecules: polymers, proteins and carbohydrates

5 hours

Science as a human endeavour

2 hours
  • Appreciate that green chemistry aims to increase the atom economy of chemical processes by designing novel reactions that can maximise the desired products and minimise by-products.LessonAtom economy and green chemistry
  • Explore important developments in sustainable chemical industries, such as new synthetic schemes that can simplify operations in chemical productions and greener solvents that are inherently environmentally and ecologically benign.LessonAtom economy and green chemistry
  • Consider the principles of green chemistry, including the design of chemical synthesis processes that use renewable raw materials, limiting the use of potentially harmful solvents and minimising the amount of unwanted products. Atom economy can be calculated and used to draw conclusions about the economic and environmental impact of chemical synthesis processes.LessonsAtom economy and green chemistryBiofuels, industrial enzymes and molecular manufacturing
  • Appreciate that dwindling supplies of economically viable sources of fossil fuels and concerns related to carbon emissions have prompted research into the synthesis of biofuels.LessonBiofuels, industrial enzymes and molecular manufacturing
  • Explore the development of biofuels from plant feedstocks, such as algae, oil seeds and wood waste, or from waste materials, such as food industry waste oils.LessonBiofuels, industrial enzymes and molecular manufacturing
  • Appreciate that molecular manufacturing (or molecular assembly) involves building objects to atomic precision using robotic mechanisms to position and react molecules and has the potential to quickly develop products (such as stronger materials, and smaller, faster and more energy-efficient computers) and address a range of global issues through provision of vital materials and products at a greatly reduced cost and environmental impact.LessonBiofuels, industrial enzymes and molecular manufacturing
  • Explore how enzymes can be used on an industrial scale for chemical synthesis to achieve an economically viable rate, including fermentation to produce ethanol and lipase-catalysed transesterification to produce biodiesel.LessonsTwo ways to make ethanolBiofuels, industrial enzymes and molecular manufacturing
  • Consider that molecular manufacturing processes involve the positioning of molecules to facilitate a specific chemical reaction; such methods have the potential to synthesise specialised products, including proteins, carbon nanotubes, nanorobots and chemical sensors used in medicine.LessonBiofuels, industrial enzymes and molecular manufacturing

Science inquiry

1 hour

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Choosing conditions for yield and rate

    Use Le Châtelier's principle and collision theory to explain the compromise temperature, pressure and catalyst of the Haber and contact processes.

    Practise
  • Equations for industrial processes

    Write balanced equations with states for the Haber process, every step of the contact process, fermentation and the hydration of ethene.

    Practise
  • Hydrogen fuel cells

    Write the anode, cathode and overall equations of a hydrogen fuel cell with an acidic or an alkaline electrolyte, and compare it with combustion.

    Practise
  • Limiting reagents and percentage yield

    Find the limiting reagent, the theoretical yield as a mass or a gas volume at STP, and the percentage yield.

    Practise
  • Analysing yield and rate data

    Read tables and graphs of yield and rate against temperature, pressure and catalyst, and justify the conditions a plant uses.

    Practise
  • Addition polymers

    Write equations for LDPE, HDPE, polypropene and PTFE, and move between a monomer and its repeating unit.

    Practise
  • Condensation polymers

    Write equations for polyesters, PLA, nylon and polysaccharides, showing the water released, and find the monomers from a repeating unit.

    Practise
  • Tripeptides and peptide bonds

    Join amino acids by peptide bonds, draw and name tripeptides from the N-terminus, and count the possible sequences.

    Practise
  • Disaccharides and glycosidic bonds

    Join monosaccharides into disaccharides and polysaccharides by glycosidic bonds, with water released.

    Practise
  • Atom economy and green chemistry

    Calculate atom economy, compare routes, and apply the principles of green chemistry, including greener solvents.

    Practise
  • Biofuels, enzymes and new manufacturing

    Explain biofuels from algae, oil seeds, wood waste and waste oils, enzyme-catalysed fermentation and biodiesel, and molecular manufacturing.

    Practise

Worked examples13

All 13

Common mistakes

Thinking a higher temperature always increases yield

A higher temperature always increases the rate, but it shifts an equilibrium in the endothermic direction. For the exothermic Haber and contact reactions, heating lowers the equilibrium yield.

Saying a catalyst increases the yield

A catalyst speeds up the forward and reverse reactions equally. Equilibrium is reached sooner, so more product is made per hour, but the equilibrium yield is unchanged.

Using Le Châtelier's principle to explain rate

Le Châtelier's principle predicts the position of equilibrium (yield). Rate is explained by collision theory: frequency of collisions and the fraction with at least the activation energy.

Choosing the limiting reagent by mass

Convert every reactant to moles, then divide by its coefficient. The smallest result is limiting, even if that reactant has the larger mass.

Confusing atom economy with percentage yield

Atom economy comes from the balanced equation alone and measures how much of the reactants' mass could end up in the product. Percentage yield compares what you actually collected with what you could have. A reaction can have 100 % atom economy and a 15 % yield.

Writing water as a product of addition polymerisation

Addition polymers form when the C=C\ce{C=C} opens. Every atom of the monomer ends up in the polymer and nothing else is made.

Leaving out the water in condensation polymerisation

Each new ester, amide or glycosidic link releases one HX2O\ce{H2O}. Write the water in the equation, and remove an −OH\ce{-OH} from one monomer and an −H\ce{-H} from the other when you draw the link.

Reading a tripeptide from the wrong end

Peptides are named from the N-terminus (free −NHX2\ce{-NH2}) to the C-terminus (free −COOH\ce{-COOH}). Gly-Ala-Ser and Ser-Ala-Gly are different molecules.

Drawing the peptide bond as an ester

A peptide bond joins C=O\ce{C=O} to N−H\ce{N-H}: −CO−NHX−\ce{-CO-NH-}. If you draw −CO−OX−\ce{-CO-O-} you've made an ester.

Using acidic half-equations for an alkaline fuel cell

In an alkaline electrolyte there is almost no HX+\ce{H+}. Balance with OHX−\ce{OH-} and HX2O\ce{H2O}: the anode is HX2+2 OHX−→2 HX2O+2 eX−\ce{H2 + 2OH- -> 2H2O + 2e-} and the cathode is OX2+2 HX2O+4 eX−→4 OHX−\ce{O2 + 2H2O + 4e- -> 4OH-}.

Exam tips

  1. For "explain the conditions" questions, treat temperature, pressure and catalyst separately. For each give its effect on yield (Le Châtelier, with the reason: exothermic forward reaction, fewer moles of gas) and on rate (collision theory), then state the compromise and the cost or safety reason.

  2. Write state symbols in every industrial equation, and use ⇌\ce{<=>} for the reversible steps (Haber, SOX2\ce{SO2} to SOX3\ce{SO3}, hydration of ethene).

  3. In yield calculations, show n=mMn = \dfrac{m}{M}, the mole ratio and the limiting reagent explicitly. Keep extra digits until the end, and round to the significant figures of the data, usually three.

  4. Check your percentage yield is less than 100 %. If it isn't, you have used the excess reagent or swapped actual and theoretical yields.

  5. Fuel-cell equations: anode is oxidation (fuel loses electrons), cathode is reduction (OX2\ce{O2} gains electrons). Check atoms and charge balance in each half-equation, and that the electrons cancel in the overall equation.

  6. Polymer equations: put nn in front of each monomer, draw the repeating unit in brackets with nn outside and the bonds passing through the brackets. For condensation polymers add the water, one HX2O\ce{H2O} per link: with the bracketed repeating unit that is n HX2On\,\ce{H2O} for one monomer and 2n HX2O2n\,\ce{H2O} for two, the form usually written in exam answers. A whole chain drawn with its end groups gives (n−1)(n - 1) or (2n−1)(2n - 1) instead.

  7. When you construct a tripeptide, draw the backbone N–C–C, N–C–C, N–C–C from left to right, and then hang each side chain from its alpha carbon.

  8. Atom economy uses the balanced equation and molar masses from the data book. Say what it means: the higher the atom economy, the less waste and the "greener" the process.

Where this shows up

  • About half the world's food is grown with fertilisers made from Haber ammonia, so roughly half the nitrogen in your body passed through a Haber reactor.

  • Sulfuric acid is made in larger tonnages than any other chemical. It goes into superphosphate fertilisers, metal processing (Mount Isa makes acid from smelter SOX2\ce{SO2}) and car batteries.

  • E10 petrol at Queensland service stations contains 10 % ethanol, much of it fermented from sugar-cane molasses.

  • Hydrogen fuel cells power buses, forklifts and cars, and the only product at the exhaust is water.

  • Food packaging (LDPE film, HDPE bottles, polypropene tubs), non-stick pans (PTFE), polyester clothing and nylon rope all come from the reactions in this topic.

  • PLA, a compostable polyester made from corn or sugar-cane starch, is used for 3D-printing filament and disposable cups.

  • Biodiesel made from used cooking oil runs trucks and generators, and enzymes in laundry powders are made by the same biotechnology that makes biofuels.

Save your progress with a free account