Lesson 4: Hydrogen fuel cells in acid and alkali
Half-equations for an alkaline hydrogen fuel cell
SkillHydrogen fuel cells
Worked example
A hydrogen–oxygen fuel cell uses aqueous potassium hydroxide as its electrolyte. Write the half-equations at the anode and the cathode and the overall equation, all with state symbols, and use the data book to calculate .
Step 1: Decide what happens at each electrode
Hydrogen (the fuel) is oxidised at the anode; oxygen is reduced at the cathode.
Step 2: Cathode, from the data book
In alkali, use the line with :
Step 3: Anode, by reversing the data-book line
The data book lists , . Hydrogen is oxidised, so reverse it:
In alkali there is almost no , so the hydrogen atoms end up in water, not as ions.
Step 4: Combine so the electrons cancel
Double the anode equation: . Add the cathode equation and cancel and from both sides:
Step 5: Cell potential
Answer
Anode: . Cathode: . Overall: , .
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Method
Anode = oxidation of the fuel; cathode = reduction of oxygen.
Balance with and in alkali, and in acid.
Multiply so the electrons match, add, and cancel common species.
, without multiplying values.
Watch out for
Writing the acidic half-equations () for an alkaline cell.
Doubling when doubling a half-equation.