Lesson 5 of 11 · 18 min

Limiting reagents and percentage yield

Find the limiting reagent, calculate the theoretical yield of a synthesis as a mass or a gas volume at STP, and compare it with the actual yield as a percentage yield.

What you will be able to do

  • Identify the limiting reagent by comparing amounts in moles with the mole ratio of the balanced equation.
  • Calculate a theoretical yield as a mass (n=mMn = \dfrac{m}{M}) or as a gas volume at STP (V=n×22.7 L mol−1V = n \times 22.7\unit{L\,mol^{-1}}).
  • Calculate the percentage yield from an actual yield, and explain why it is less than 100 %.
  • Calculate the yield when the conditions limit how far an equilibrium reaction goes.

A chemical engineer needs to know how much product a plant can make from the raw materials it buys, and how close the plant comes to that. The balanced equation sets the maximum; the plant's real output is always less. This lesson puts numbers on both.

Definition

Theoretical, actual and percentage yield

The theoretical yield is the mass of product the balanced equation predicts when all of the limiting reagent reacts. The actual yield is what is collected. The percentage yield compares them:

percentage yield=actual yieldtheoretical yield×100 %\text{percentage yield} = \frac{\text{actual yield}}{\text{theoretical yield}} \times 100\,\%

Calculating a theoretical yield

  1. Write the balanced equation

    The coefficients give the mole ratio.

  2. Convert each reactant to moles

    n=mMn = \dfrac{m}{M} for a mass, n=V22.7n = \dfrac{V}{22.7} for a gas volume in litres at STP, n=cVn = cV for a solution.

  3. Find the limiting reagent

    Divide each amount by its coefficient. The smallest result is the limiting reagent. (Or work out how much of one reactant the other needs, and see whether there is enough.)

  4. Use the mole ratio to find moles of product

    Always from the limiting reagent.

  5. Convert to the quantity asked for

    m=nMm = nM for a mass, V=n×22.7V = n \times 22.7 for a gas at STP.

Common mistake

The limiting reagent is not the one with less mass

Masses can't be compared directly, because each substance has a different molar mass and the equation may need more of one than another. In the Haber process, 6 g of hydrogen (3.0 mol3.0\unit{mol}) is enough to react with 28 g of nitrogen (1.0 mol1.0\unit{mol}): the reactant with the smaller mass is not limiting. Always convert to moles and use the mole ratio.

56.0 g56.0\unit{g} of NX2\ce{N2} and 10.0 g10.0\unit{g} of HX2\ce{H2}: moles divided by the coefficient in NX2+3 HX2⇌2 NHX3\ce{N2 + 3H2 <=> 2NH3}. The shorter bar is the limiting reagent, even though hydrogen's raw mole count (4.95) is larger.

Worked example

Limiting reagent and percentage yield of ammonia

  • Complex familiar
  • Technology active

In a test reactor, 56.0 g56.0\unit{g} of nitrogen and 10.0 g10.0\unit{g} of hydrogen react: NX2(g)+3 HX2(g)⇌2 NHX3(g)\ce{N2(g) + 3H2(g) <=> 2NH3(g)}. The mixture yields 20.4 g20.4\unit{g} of ammonia. Identify the limiting reagent and calculate the percentage yield.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Convert each reactant to moles.

  2. Divide each by its coefficient: the smallest is limiting.

  3. Theoretical yield from the limiting reagent and the mole ratio.

  4. Percentage yield = actual ÷ theoretical × 100 %.

Watch out for

  • Picking hydrogen as limiting "because there is less of it" without a mole comparison: here it is limiting, but the reason must be the moles.

  • Calculating the theoretical yield from the excess reagent (that gives 68.1 g68.1\unit{g}, and a yield of only 30 %).

In a laboratory model of the Haber process, 14.0 g14.0\unit{g} of nitrogen is mixed with 6.00 g6.00\unit{g} of hydrogen. Which is the limiting reagent?

Choose one answer

Gases at STP make volume calculations easy: one mole of any gas occupies 22.7 L22.7\unit{L} at 273 K273\unit{K} and 100 kPa100\unit{kPa}, so a mole ratio is also a volume ratio. In the Haber process, 1 L1\unit{L} of NX2\ce{N2} reacts with 3 L3\unit{L} of HX2\ce{H2} to give at most 2 L2\unit{L} of NHX3\ce{NH3}, all measured at the same temperature and pressure.

Worked example

Limiting reagent with a gas volume at STP

  • Complex familiar
  • Technology active

In a model of the contact process, 12.8 g12.8\unit{g} of sulfur dioxide is mixed with 1.70 L1.70\unit{L} of oxygen, measured at STP, and passed over a catalyst: 2 SOX2(g)+OX2(g)⇌2 SOX3(g)\ce{2SO2(g) + O2(g) <=> 2SO3(g)}. The mass of sulfur trioxide collected is 10.8 g10.8\unit{g}. Calculate the percentage yield.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. n=mMn = \dfrac{m}{M} for masses and n=V22.7n = \dfrac{V}{22.7} for gases at STP.

  2. Compare with the mole ratio to find the limiting reagent.

  3. Theoretical yield from the limiting reagent, then actual ÷ theoretical.

Watch out for

  • Assuming SOX2\ce{SO2} is limiting because the question gives its mass first (that gives 67.5 %).

  • Using 22.4 L mol−122.4\unit{L\,mol^{-1}}: QCAA's STP is 273 K273\unit{K} and 100 kPa100\unit{kPa}, so Vm=22.7 L mol−1V_m = 22.7\unit{L\,mol^{-1}}.

A brewery ferments 500 g500\unit{g} of glucose and collects 200 g200\unit{g} of ethanol. Calculate the percentage yield, to three significant figures. CX6HX12OX6(aq)→2 CX2HX5OH(aq)+2 COX2(g)\ce{C6H12O6(aq) -> 2C2H5OH(aq) + 2CO2(g)}

in \%

Give 3 significant figures.

Note

Why actual yields fall short

  • The reaction is reversible and reaches equilibrium before all the reactants are used (Haber, contact, hydration of ethene).
  • The gases leave the reactor before reaching equilibrium.
  • Side reactions make other products.
  • Product is lost when it is separated, transferred or purified (distillation, filtering).

An answer above 100 % means a mistake: the wrong reagent was used as limiting, or the product was still wet or impure.

Yield set by the conditions. For an equilibrium reaction, the conditions decide how far it goes, so a question may give a conversion: "at 450 °C and 20 MPa, 15 % of the nitrogen is converted per pass". Calculate the theoretical yield as usual, then multiply by the fraction converted.

A Haber reactor is fed 1.00×103 mol1.00 \times 10^{3}\unit{mol} of NX2\ce{N2} with 3.00×103 mol3.00 \times 10^{3}\unit{mol} of HX2\ce{H2} each minute. Only 15.0 % of the nitrogen reacts in one pass. Calculate the mass of ammonia, in kilograms, produced per pass each minute.

in kg

Give 3 significant figures.

Summary

  • Convert everything to moles; divide by coefficients to find the limiting reagent.

  • Theoretical yield comes from the limiting reagent and the mole ratio.

  • Percentage yield =actualtheoretical×100 %= \dfrac{\text{actual}}{\text{theoretical}} \times 100\,\%, always below 100 %.

  • At STP, n=V22.7n = \dfrac{V}{22.7} and gas volumes react in the mole ratio.

  • For equilibrium processes, multiply by the fraction converted under the stated conditions.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 110% read

Save your progress with a free account