Chemistry · Unit 4 · Topic 1

Properties and structure of organic materials

Name, draw and tell apart organic compounds and their isomers, explain their physical properties, write their reactions and pathways, and analyse polymers, amino acids and spectra.

  • 14 lessons
  • 4 h 21 min of lessons
  • 22 worked examples
  • 30 hours in the syllabus
0 of 14

Start here

Organic families and their formulas

Lesson 1 of 14 · 18 min

Start the topic

Lessons

14
  1. Organic families and their formulas (up next)

    Identify the eleven classes of organic compound by their functional groups, describe a homologous series, and tell empirical, molecular and structural formulas apart.

  2. Naming alkanes, alkenes and alkynes

    Apply the IUPAC rules to name branched alkanes, alkenes and alkynes up to ten carbons, and draw the structure that a name describes.

  3. Naming alcohols, haloalkanes and carbonyl compounds

    Name and draw alcohols, haloalkanes, aldehydes, ketones, carboxylic acids, amines and amides, and classify alcohols and haloalkanes as primary, secondary or tertiary.

  4. Structural isomers

    Find every structural isomer of a formula systematically, including all the alkanes up to C6 and straight-chain alkenes up to C6, and tell chain, position and functional group isomers apart.

  5. Cis/trans and optical isomers

    Decide when an alkene has cis and trans isomers, find chiral carbons, and draw the two mirror-image optical isomers of a chiral molecule.

  6. Trends in physical properties

    Explain and analyse trends in boiling point, melting point, volatility and solubility within and between homologous series using dispersion forces, dipole–dipole interactions and hydrogen bonds.

  7. Reactions of alkanes, alkenes and alkynes

    Write equations for combustion and halogen substitution of alkanes, addition of hydrogen, halogens, hydrogen halides and water to alkenes, reduction of alkynes, and use Markovnikov's rule.

  8. Reactions of haloalkanes and alcohols

    Write equations for the substitution and elimination reactions of haloalkanes and the reactions of alcohols, and use acidified dichromate and permanganate to tell primary, secondary and tertiary alcohols apart.

  9. Acids, amines, esters and amides

    Describe carboxylic acids as weak acids and amines as weak bases, name esters, write equations for esterification and amide formation, and explain why esterification is reversible.

  10. Planning reaction pathways

    Use the data book's reaction-pathways map to plan multi-step syntheses with reagents, conditions and equations, classify each step, and interpret chemical tests to identify compounds.

  11. Polymers: structure and properties

    Describe the structures of polyethene, polypropene, PTFE, PLA, nylon and polyester, relate strength, density and biodegradability to structure, and judge how green a polymer is with atom economy.

  12. Amino acids, peptides and sugars

    Describe the structural features of 2-amino acids, tripeptides, monosaccharides and disaccharides, and explain the acid–base behaviour of amino acids and the formation of zwitterions.

  13. Chromatography and electrophoresis of amino acids

    Explain how paper and thin-layer chromatography and electrophoresis separate amino acids, calculate RFR_F values, and identify amino acids from chromatograms and electrophoresis results.

  14. Identifying compounds: composition and spectra

    Calculate percentage composition, find empirical and molecular formulas from percentage or combustion data and the molecular ion, and read mass and infrared spectra to identify an organic compound.

  15. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Almost everything alive, and most of what you wear, eat, take as medicine or burn as fuel, is built on chains of carbon atoms. Carbon forms four strong covalent bonds, to other carbon atoms as readily as to hydrogen, oxygen, nitrogen and the halogens, so it builds chains, branches and rings of almost any size. This topic is about reading those structures: what a molecule is called, what shape it has, how it behaves, and how you can prove what it is.

You start with the families of organic compounds. Each family has a functional group, the part of the molecule that reacts, and its members form a homologous series that differs by CHX2\ce{CH2} from one member to the next. You learn to draw structural formulas, to name compounds with the IUPAC rules up to ten carbons, and to find every isomer of a formula, including cis and trans alkenes and the mirror-image optical isomers of molecules with a chiral carbon. Intermolecular forces then explain why boiling points rise along a series and why alcohols and acids dissolve in water while alkanes do not.

Next come the reactions: substitution, addition, elimination, oxidation and condensation, with the reagents and conditions for each arrow on the data book's reaction-pathways map, Markovnikov's rule for adding to an unsymmetrical alkene, and the colour tests that tell alkanes from alkenes and primary, secondary and tertiary alcohols from one another. You combine them into multi-step syntheses.

The last part turns to materials and evidence. You relate the structures of polyethene, polypropene, PTFE, PLA, nylon and polyester to their strength, density and biodegradability; describe amino acids, tripeptides and sugars; separate amino acids by chromatography and electrophoresis; and identify unknown compounds from percentage composition, mass spectra and infrared spectra.

The science understanding dot points can be assessed in the external exam (Papers 1 and 2). The science as a human endeavour and science inquiry points, from computer modelling of proteins to green polymers and organochlorine insecticides, feed your internal assessments and appear here as lesson contexts. How polymers, peptides and disaccharides are made, with their equations, is the next topic.

Before you start

Builds on Chemical reactions — reactants, products and energy change, Intermolecular forces and gases, Aqueous solutions and acidity and Oxidation and reduction.

  • Covalent bonding, valence (C forms 4 bonds, N 3, O 2, H and the halogens 1) and Lewis structures (Unit 1).
  • Dispersion forces, dipole–dipole interactions and hydrogen bonds, and how they affect boiling points and solubility (Unit 2).
  • Moles, molar mass MM and n=mMn = \frac{m}{M}, and empirical formulas from mass data (Unit 1).
  • Brønsted–Lowry acids and bases, weak acids and conjugate pairs (Units 2 and 3).
  • Oxidation and reduction as loss and gain of electrons, and oxidising agents such as dichromate and permanganate (Unit 3).
  • Paper chromatography and RFR_F from mixtures of dyes (Unit 2).
  • The mass spectrometer as a source of relative masses (Unit 1). How it works is not assessed.

What QCAA says you need to know45 dot points

Structure of organic compounds

Physical properties and trends

  • Explain the trends (melting point, boiling point, volatility, solubility in water and organic solvents) within and between homologous series (alkanes, alkenes, alcohols, carboxylic acids) in term of intermolecular and intramolecular bonding, e.g. dispersion forces, dipole-dipole interactions and hydrogen bonds.LessonTrends in physical properties
  • Analyse data to determine the physical properties of an homologous series, trends in melting point, boiling point, volatility and the solubility alkanes, alkenes, alcohols and carboxylic acids.LessonTrends in physical properties

Organic reactions and reaction pathways

Organic materials: structure and function

Analytical techniques

  • Explain how amino acids can be separated and identified by paper/TLC chromatography, including intermolecular forces/solubility in mobile and stationary phase and retention (RFR_F) values.LessonChromatography and electrophoresis of amino acids
  • Explain how amino acids can be separated and analysed by electrophoresis, including pH of buffer, isoelectric points, and movement of charged ions.LessonChromatography and electrophoresis of amino acids
  • Analyse data, including paper/TLC chromatograms and electrophoresis to determine the identity of amino acids and retention factors. (Formula: RF=distance moved by the amino aciddistance moved by the solventR_F = \dfrac{\text{distance moved by the amino acid}}{\text{distance moved by the solvent}})LessonChromatography and electrophoresis of amino acids
  • Analyse data from spectra, including mass spectroscopy and infrared to determine the identity and structure of organic molecules.LessonIdentifying compounds: composition and spectra

Science as a human endeavour

  • Appreciate that the developments in computer modelling enabled more accurate visualisation and prediction of three-dimensional organic structures, such as proteins, which is critical in drug design and biotechnology.LessonAmino acids, peptides and sugars
  • Recognise that enzymes are proteins and explore characteristics of biological catalysts (enzymes), including activity, depends on the structure and the specificity of the enzyme action.LessonAmino acids, peptides and sugars
  • Consider that triglycerides (lipids) are esters, and that saturated and unsaturated fatty acids have difference structures and properties.LessonAcids, amines, esters and amides
  • Appreciate that synthetic polymers often have large 'ecological footprints' as they are synthesised from fossil fuels and do not biodegrade. Therefore, sustainable polymers, produced from renewable sources such as plants, waste products and waste gases are 'greener'.LessonPolymers: structure and properties
  • Explore the principles of green chemistry and recognise that the higher the atom economy, the 'greener' the process.LessonPolymers: structure and properties
  • Appreciate that organochlorine compounds, such as DDT, chlordane and lindane, were identified as powerful insecticides in the 1950s because their structure makes them chemically unreactive.LessonReactions of haloalkanes and alcohols
  • Explore the relationship between the chemical structure of insecticides, their effectiveness as an insecticide, and their persistent and bioaccumulation in the environment.LessonReactions of haloalkanes and alcohols

Science inquiry

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Classes and functional groups

    Identify the class and functional group of an organic molecule, describe a homologous series and tell saturated from unsaturated molecules.

    Practise
  • Empirical, molecular and structural formulas

    Tell the three kinds of formula apart and write each one, including displayed and condensed structural formulas, for any compound in the course.

    Practise
  • Naming alkanes, alkenes and alkynes

    Apply the IUPAC rules to hydrocarbons up to C10 with methyl and ethyl branches, and draw a structure from a name.

    Practise
  • Naming compounds with functional groups

    Name and draw alcohols, haloalkanes, aldehydes, ketones, carboxylic acids, amines and amides, and classify alcohols and haloalkanes as primary, secondary or tertiary.

    Practise
  • Structural isomers

    Find, draw and name the chain, position and functional group isomers of a formula, including every alkane up to C6 and straight-chain alkene up to C6.

    Practise
  • Cis/trans and optical isomers

    Decide whether an alkene has cis and trans isomers, find chiral carbons, and draw the two optical isomers of a chiral molecule.

    Practise
  • Trends in physical properties

    Explain and analyse melting point, boiling point, volatility and solubility within and between homologous series with intermolecular forces.

    Practise
  • Organic reactions and equations

    Write equations for substitution, addition, elimination, oxidation, combustion and polymerisation reactions, and classify each reaction.

    Practise
  • Markovnikov's rule

    Predict the major product when HX or water adds to an unsymmetrical alkene.

    Practise
  • Acids, amines, esters and amides

    Describe the acid–base reactions of carboxylic acids and amines, name esters and amides, and explain why esterification is reversible.

    Practise
  • Chemical tests and reaction pathways

    Interpret bromine water, dichromate and permanganate tests, and plan multi-step syntheses with reagents, conditions and equations.

    Practise
  • Polymers, amino acids and sugars

    Describe the structures of polymers, amino acids, tripeptides and sugars, relate polymer properties to structure, and explain zwitterions.

    Practise
  • Chromatography and electrophoresis

    Explain and analyse paper or TLC chromatograms with $R_F$ values, and predict which way amino acids move in electrophoresis.

    Practise
  • Identifying compounds from data

    Use percentage composition, combustion data, mass spectra and infrared spectra to find the formula and structure of an unknown.

    Practise

Worked examples22

All 22

Common mistakes

Not choosing the longest chain

A branch drawn at the end of a chain may continue the chain. CHX3CH(CHX3)CHX2CHX3\ce{CH3CH(CH3)CH2CH3} is drawn with three carbons in a row and a methyl, but its longest chain has four carbons: it is 2-methylbutane, never 1-methylbutane or 1,1-dimethylpropane.

Numbering from the wrong end

Number from the end that gives the principal group (or the C=C) the lowest number, then the substituents. Butan-3-ol does not exist: the same molecule numbered the other way is butan-2-ol. Likewise propan-3-ol is propan-1-ol.

Substituents out of alphabetical order

List substituents alphabetically, ignoring di-, tri-: 3-ethyl-2-methylhexane, not 2-methyl-3-ethylhexane. Each repeat needs its own locant: 2,2-dimethylbutane, not 2-dimethylbutane.

Miscounting carbons in aldehydes and acids

The carbon of −CHO\ce{-CHO} and −COOH\ce{-COOH} is part of the chain and is always carbon 1. CHX3CHX2COOH\ce{CH3CH2COOH} has three carbons: propanoic acid, not ethanoic acid. No locant is needed for the group.

Naming an ester acid-first

An ester is named alcohol part first as an alkyl group, then the acid part ending in -oate. CHX3COOCHX2CHX3\ce{CH3COOCH2CH3}, from ethanoic acid and ethanol, is ethyl ethanoate, not ethanoate ethyl. The order of the formula matters too: CHX3CHX2COOCHX3\ce{CH3CH2COOCH3} is a different ester, methyl propanoate.

Reversing Markovnikov's rule

The hydrogen goes to the carbon that already has more hydrogens, so the Br or OH ends up on the more substituted carbon. Propene + HBr gives mainly 2-bromopropane, not 1-bromopropane.

Oxidising a tertiary alcohol

A tertiary alcohol's carbon has no hydrogen to lose, so acidified dichromate stays orange and permanganate stays purple. Only primary alcohols (to aldehydes, then acids) and secondary alcohols (to ketones) react.

Giving but-1-ene cis and trans isomers

Cis/trans isomers need two different groups on each carbon of the C=C. But-1-ene has two H atoms on carbon 1, so it has no cis or trans form. But-2-ene does.

Marking a chiral carbon with two identical groups

A chiral carbon has four different groups. The central carbon of propan-2-ol carries two methyl groups, so it is not chiral, and any CHX2\ce{CH2} or CHX3\ce{CH3} carbon can never be chiral.

Confusing the O–H of an acid with an alcohol

In an infrared spectrum, an alcohol's O–H is a broad band near 32003200–3600 cm−13600\unit{cm^{-1}}. A carboxylic acid's O–H is a very broad band lower down, about 25002500–3000 cm−13000\unit{cm^{-1}}, overlapping the C–H band, and comes with a strong C=O band near 1700 cm−11700\unit{cm^{-1}}.

Taking the tallest peak as the molecular ion

The tallest peak is the base peak, the most abundant fragment. The molecular ion MX+\ce{M+} is the significant peak with the highest m/z, at the right-hand end of the spectrum, and it may be small.

Exam tips

  1. Draw structural formulas with every bond and every hydrogen shown unless the question accepts a condensed formula. Count four bonds on every carbon before you move on.

  2. Write organic equations with structural (or condensed) formulas, never molecular formulas alone: CX3HX6+HBr→CX3HX7Br\ce{C3H6 + HBr -> C3H7Br} does not show which isomer forms. Include the inorganic product (HCl\ce{HCl}, HX2O\ce{H2O}, NaBr\ce{NaBr}) and the reagents and conditions over the arrow.

  3. For reaction pathways, name each intermediate, give its structure, and state the reagent and condition of every step: "acidified KX2CrX2OX7\ce{K2Cr2O7}, heat under reflux" or "HX2O(g)\ce{H2O(g)}, HX3POX4\ce{H3PO4} catalyst, 300 °C300\,°\mathrm{C}".

  4. When asked to distinguish two compounds with a test, give the reagent, the observation for each compound and which is which: "bromine water decolourises from orange-brown to colourless with hex-1-ene but stays orange-brown with hexane".

  5. Explain physical properties by naming the forces on both sides of a comparison and saying which is stronger and why: more electrons and a larger surface area give stronger dispersion forces; an −OH\ce{-OH} group adds hydrogen bonding.

  6. Show percentage composition and empirical formula working in a table: mass or percentage, ÷ ArA_r, ÷ smallest. Keep three or four significant figures until the end, and only round ratios that are within about 0.1 of a whole number.

  7. In spectra questions, quote the evidence: "a broad absorption at 3350 cm−13350\unit{cm^{-1}} shows an O–H (alcohol)", "the molecular ion at m/z 60 gives M=60 g mol−1M = 60\unit{g\,mol^{-1}}". Link each piece of evidence to the structure.

  8. RFR_F is a ratio of two distances measured from the baseline: to the centre of the spot and to the solvent front. It has no unit.

  9. In electrophoresis, compare the buffer pH with each pI: pH below pI means a positive ion (moves to the negative electrode); above pI, a negative ion (to the positive electrode); equal, no movement.

Where this shows up

  • Fuels: petrol, diesel and LPG are mixtures of alkanes separated by boiling point, and E10 contains ethanol.

  • Plastics: HDPE milk bottles, LDPE cling wrap, polypropene car bumpers and food containers, PTFE non-stick pans, nylon fishing line, polyester clothing and PLA compostable cups.

  • Food: esters give fruits their smells, fats and oils are triglyceride esters, and margarine is made by hydrogenating unsaturated vegetable oils.

  • Medicines: drug molecules are designed to fit the three-dimensional shape of a target protein, and many are sold as a single optical isomer because the other one is inactive or harmful.

  • Forensic and medical testing: breath analysers once used the colour change of acidified dichromate oxidising ethanol, and electrophoresis separates proteins in blood and DNA fragments.

  • Analytical chemistry: mass and infrared spectroscopy identify unknown substances in drug testing, environmental monitoring and quality control.

  • Agriculture and the environment: organochlorine insecticides such as DDT persist and bioaccumulate, which is why they are banned or restricted in Australia.

Save your progress with a free account