Chemistry · Unit 3 · Topic 2

Oxidation and reduction

Electron transfer, oxidation states and half-equations in acid, galvanic cells and standard electrode potentials, electrolysis of molten and aqueous electrolytes, and Faraday calculations.

  • 12 lessons
  • 3 h 27 min of lessons
  • 16 worked examples
  • 20 hours in the syllabus
0 of 12

Start here

Redox as electron transfer

Lesson 1 of 12 · 16 min

Start the topic

Lessons

12
  1. Redox as electron transfer (up next)

    Model oxidation as loss of electrons and reduction as gain, write the half-equations for a metal displacement, and recognise displacement, combustion, corrosion and cells as redox reactions.

  2. Oxidation states and naming compounds

    Assign oxidation states with a short set of rules, written with the sign first, use them to spot redox reactions, and name transition metal compounds with roman numerals.

  3. Oxidising and reducing agents

    Determine the species oxidised and reduced and the oxidising and reducing agents in any redox reaction, using electron transfer or changes in oxidation state.

  4. Writing half-equations in acid

    Balance any oxidation or reduction half-equation in acidic solution by balancing the key atom, then oxygen with water, hydrogen with H⁺ ions and charge with electrons.

  5. Balancing redox equations

    Combine two half-equations into a balanced overall redox equation in acidic solution, and use changes in oxidation number to balance and check it.

  6. Galvanic cells

    Explain how a galvanic cell turns a spontaneous redox reaction into electricity, identify the anode, cathode, electron flow and salt bridge ions, and write cell diagrams.

  7. Standard electrode potentials and E°cell

    Describe the standard hydrogen electrode and what a standard electrode potential means, calculate Ecell∘E^\circ_\text{cell} from the data book, and state the limits of what E∘E^\circ values predict.

  8. Predicting redox reactions with E°

    Use the table of standard electrode potentials and the reactivity series to rank oxidising and reducing agents, predict whether a reaction is spontaneous, and compare galvanic cells.

  9. Electrolytic cells and molten salts

    Explain how an electrolytic cell uses an external power supply to drive a non-spontaneous reaction, identify its components, tell it apart from a galvanic cell, and predict the products of electrolysing a molten salt.

  10. Electrolysis of aqueous solutions

    State the factors that decide the products of electrolysis, explain the products for dilute and concentrated sodium chloride and copper(II) sulfate, and describe electroplating and copper refining.

  11. Electrolysis calculations

    Use q=Itq = It and q=n(e−)Fq = n(e^-)F with the electrode half-equations to calculate moles of electrons, current, time, the mass of metal deposited or the volume of gas at STP, and compare the amounts at each electrode.

  12. Redox in technology

    Explore the redox chemistry of breath tests, fuel cells, future batteries and desalination, and weigh up their benefits and limits.

  13. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

A zinc strip turns black in blue copper sulfate solution. A steel gate rusts. A phone battery runs a screen for a day, and a power supply plates a thin layer of silver onto a spoon. These are all the same kind of reaction: one substance loses electrons and another gains them. That is oxidation and reduction, or redox.

In this topic you will track electrons with oxidation states and half-equations, balance redox equations in acidic solution, and use the data book's standard electrode potentials to predict which reactions happen and what voltage a cell gives. Then you will turn the process around: in an electrolytic cell a power supply forces a non-spontaneous reaction to happen, and q=It=n(e−)Fq = It = n(e^-)F tells you how much product it makes.

Before you start

Builds on Properties and structure of atoms, Chemical reactions — reactants, products and energy change, Aqueous solutions and acidity and Chemical equilibrium systems.

  • Ions and their charges, ionic formulas and the names of common polyatomic ions such as SOX4X2−\ce{SO4^2-}, NOX3X−\ce{NO3-} and OHX−\ce{OH-} (Unit 1).
  • The mole, n=mMn = \frac{m}{M}, molar mass from the data book and balanced chemical equations with state symbols (Unit 1).
  • Molar volume of a gas at STP, 22.7 L mol−122.7\unit{L\,mol^{-1}} at 273 K and 100 kPa (Unit 2).
  • Acids, HX+\ce{H+} ions and the reactions of metals with acids (Unit 2).
  • Electric current as a flow of charge and the coulomb as its unit.

What QCAA says you need to know39 dot points

Redox reactions

Electrochemical cells

Galvanic cells

  • Identify that galvanic cells generate an electrical potential difference from a spontaneous redox reaction.LessonGalvanic cells
  • Explain that galvanic cells can be represented as cell diagrams, including anode and cathode half-equations.LessonGalvanic cells
  • Explain that oxidation occurs at the negative electrode (anode) and reduction occurs at the positive electrode (cathode).LessonGalvanic cells
  • Explain that two half-cells can be connected by a salt bridge to create a galvanic cell, e.g. Mg, Zn, Fe and Cu and solutions of their ions.LessonGalvanic cells
  • Identify the essential components of a galvanic cell, including the oxidation and reduction half-cells, the positive and negative electrodes and their solutions of their ions, the flow of electrons and the movement of ions, and the salt bridge.LessonGalvanic cells
  • Sketch a galvanic cell and label the essential components.LessonGalvanic cells

Standard electrode potential

Electrolytic cells

  • Identify that electrolytic cells use an external electrical potential difference to provide the energy to allow a non-spontaneous redox reaction to occur.LessonElectrolytic cells and molten salts
  • Identify the essential components of an electrolytic cell, including source of electric current and conductors, positive and negative electrodes, and the electrolyte.LessonElectrolytic cells and molten salts
  • State the factors that affect the products in electrolysis.LessonElectrolysis of aqueous solutions
  • Determine the products of the electrolysis of a molten salt.LessonElectrolytic cells and molten salts
  • Explain the products of the electrolysis of aqueous solutions, e.g. dilute and concentration sodium chloride(aq) and copper sulfate(aq).LessonElectrolysis of aqueous solutions
  • Describe that electrolytic cells can be used in small-scale and industrial situations, including metal plating and the purification of copper.LessonElectrolysis of aqueous solutions
  • Calculate moles of electrons, current, time, mass of substance or volume of gas produced or used during electrolysis. (Formula: q=n(e−)×Fq = n(e^-) \times F or q=I×tq = I \times t).LessonElectrolysis calculations
  • Analyse data to determine the relative amounts of product produced at each electrode in electrolysis.LessonElectrolysis calculations

Science as a human endeavour

  • Appreciate that the level of alcohol in the body can be measured by testing breath or blood alcohol concentrations.LessonRedox in technology
  • Explore the chemistry of breath tests for alcohol, drugs and disease.LessonRedox in technology
  • Appreciate that fuel cells are a potential lower-emission alternative to the internal combustion engine and are already being used to power buses, boats, trains and cars.LessonRedox in technology
  • Explore battery technologies that could power the future.LessonRedox in technology
  • Appreciate that electrochemistry has a wide range of uses, ranging from industrial scale metal extraction to personal cosmetic treatments.LessonsElectrolysis of aqueous solutionsRedox in technology
  • Explore the desalination process to produce fresh water.LessonRedox in technology

Science inquiry

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Recognising redox reactions

    Describe oxidation as loss and reduction as gain of electrons, and recognise displacement, combustion, corrosion and cell reactions as redox.

    Practise
  • Oxidation states

    Assign the oxidation state of any atom in a compound or ion with the rules, written with the sign first (+2), and use changes in it to spot redox.

    Practise
  • Naming transition metal compounds

    Name transition metal compounds with roman numerals, such as iron(III) chloride, and write the formula from the name.

    Practise
  • Oxidising and reducing agents

    Identify the species oxidised and reduced and the oxidising and reducing agents in a redox reaction.

    Practise
  • Half-equations in acid

    Write balanced oxidation and reduction half-equations in acidic solution using H₂O, H⁺ and electrons.

    Practise
  • Balancing redox equations

    Combine half-equations into a balanced overall redox equation in acid, and check it with oxidation numbers.

    Practise
  • Galvanic cells

    Describe and sketch a galvanic cell, find the anode and cathode, electron and ion flow, half-equations and the cell diagram.

    Practise
  • Electrode potentials and E°cell

    Describe the standard hydrogen electrode and E°, calculate E°cell from the data book, and state the limitations of E° values.

    Practise
  • Predicting redox reactions

    Use E° values and the reactivity series to rank oxidising and reducing agents, predict displacement and spontaneity, and compare cells.

    Practise
  • Electrolytic cells and products

    Describe electrolytic cells and predict the products of electrolysing molten salts and aqueous solutions, in plating and copper refining.

    Practise
  • Electrolysis calculations

    Use q = It and q = n(e⁻)F to find moles of electrons, current, time, mass deposited or gas volume at STP.

    Practise
  • Redox in technology

    Explain the chemistry of breath tests, fuel cells, batteries and desalination, and evaluate them.

    Practise

Worked examples16

All 16

Common mistakes

Reversing OIL RIG

Oxidation Is Loss of electrons, Reduction Is Gain. A species that gains electrons is reduced, and its oxidation state goes down. CuX2++2 eX−→Cu\ce{Cu^2+ + 2e- -> Cu} is reduction.

Calling the species oxidised the oxidising agent

The oxidising agent is the species that is reduced: it takes electrons from something else. In Zn+CuX2+→ZnX2++Cu\ce{Zn + Cu^2+ -> Zn^2+ + Cu}, zinc is oxidised and is the reducing agent; CuX2+\ce{Cu^2+} is reduced and is the oxidising agent.

Thinking the anode is always negative

The anode is where oxidation happens. In a galvanic cell it is negative; in an electrolytic cell it is joined to the positive terminal of the supply, so it is positive. Use "oxidation at the anode" to decide, never the sign.

Sending electrons through the salt bridge

Electrons travel only through the wire, from anode to cathode. Ions carry the charge through the salt bridge and the solutions: anions towards the anode, cations towards the cathode.

Flipping a sign in E°cell

Use Ecell∘=Ered∘−Eox∘E^\circ_\text{cell} = E^\circ_\text{red} - E^\circ_\text{ox} with both values exactly as printed. If you change the sign of the oxidation half-cell's E∘E^\circ and then subtract as well, you flip it twice. And never multiply E∘E^\circ by the number of electrons or the coefficient.

Putting H⁺ and H₂O on the wrong side

Balance oxygen with HX2O\ce{H2O} on the side short of oxygen, then hydrogen with HX+\ce{H+} on the side short of hydrogen. When MnOX4X−\ce{MnO4-} is reduced to MnX2+\ce{Mn^2+}, the four O atoms become 4 HX2O\ce{4H2O} on the right, so the 8 HX+\ce{8H+} go on the left.

Getting sodium from aqueous sodium chloride

In aqueous solution, water (E∘=−0.83 VE^\circ = -0.83\unit{V}) is reduced far more easily than NaX+\ce{Na+} (−2.71 V-2.71\unit{V}), so the cathode gives hydrogen gas. Sodium metal comes only from molten sodium chloride.

Leaving time in minutes

In q=Itq = It, the time must be in seconds. 25 minutes is 1500 s1500\unit{s}; 2 hours is 7200 s7200\unit{s}.

Forgetting the electrons per ion

Moles of metal =n(e−)z= \frac{n(e^-)}{z}, where zz is the charge on the ion. One mole of electrons deposits one mole of silver but only half a mole of copper and a third of a mole of aluminium.

Mixing up the electrolytic and galvanic signs

Electrons still flow from anode to cathode in an electrolytic cell, but the supply pushes them there: the cathode is joined to the negative terminal and the anode to the positive terminal.

Exam tips

  1. Copy E∘E^\circ values from the data book exactly as printed, including the sign and two decimal places, and write Ecell∘=Ered∘−Eox∘E^\circ_\text{cell} = E^\circ_\text{red} - E^\circ_\text{ox} with the substitution shown.

  2. Write half-equations and redox equations with state symbols, and check two things before you move on: the atoms balance and the total charge is the same on both sides.

  3. When asked for the oxidising or reducing agent, name the whole species as written (MnOX4X−\ce{MnO4-}, not Mn or manganese), and say whether it is oxidised or reduced if the question asks you to justify.

  4. On a galvanic cell sketch, label the anode and cathode with their signs, both solutions, the salt bridge with its electrolyte, the direction of electron flow in the wire and the direction of ion movement in the salt bridge.

  5. For electrolysis in water, list every species present (cations, anions and water), then pick the strongest oxidising agent for the cathode and the strongest reducing agent for the anode, and state any concentration or electrode effects.

  6. In Faraday calculations, set out the chain: q=Itq = It, then n(e−)=qFn(e^-) = \frac{q}{F}, then the mole ratio from the half-equation, then mass or volume. Give the answer to the significant figures of the data.

  7. Oxidation states are written with the sign before the number (+3, −2); charges on ions are written with the number first (FeX3+\ce{Fe^3+}). Roman numerals in names carry no sign: iron(III).

  8. "Explain" questions on spontaneity need a comparison of E∘E^\circ values, the calculated Ecell∘E^\circ_\text{cell} and a conclusion; "evaluate" questions also need a limitation, such as non-standard conditions.

Where this shows up

  • Breathalysers measure alcohol with a fuel cell that oxidises ethanol on a platinum electrode; older units used the colour change of orange dichromate to green CrX3+\ce{Cr^3+}.

  • Hydrogen fuel cells already power buses, trains, boats and cars, and their only exhaust is water.

  • Lithium-ion batteries in phones and cars, and vanadium redox flow batteries for storing solar and wind energy, are galvanic cells that can be recharged by electrolysis.

  • Copper for electrical wiring is refined to 99.99% purity by electrolysis, and aluminium is extracted from molten alumina in large electrolytic cells.

  • Galvanising coats steel in zinc, which is oxidised first and protects the iron from rust; ships carry blocks of magnesium or zinc as sacrificial anodes for the same reason.

  • Electroplating gives jewellery, cutlery and car parts thin coatings of silver, gold, nickel or chromium.

  • Electrodialysis uses electrodes and ion-exchange membranes to pull salt out of brackish water.

  • Cosmetic treatments such as electrolysis hair removal use a small current to destroy hair follicles.

Save your progress with a free account