Chemistry · Unit 2 · Topic 2

Aqueous solutions and acidity

Explain water's properties from hydrogen bonding, calculate concentrations and dilutions, predict precipitates and identify ions, read solubility curves, and use pH and the Arrhenius model to describe acids and their reactions.

  • 12 lessons
  • 3 h 33 min of lessons
  • 19 worked examples
  • 22 hours in the syllabus
0 of 12

Start here

Why water is so unusual

Lesson 1 of 12 · 15 min

Start the topic

Lessons

12
  1. Why water is so unusual (up next)

    Explain water's high boiling point, high heat capacity, surface tension, solvent power and floating ice from its bent shape and the hydrogen bonds between its molecules.

  2. Solutions and concentration

    Name the solute, solvent and solution, write concentrations with square brackets, and use c=nVc = \frac{n}{V} and n=mMn = \frac{m}{M} to find concentration, moles, mass or volume.

  3. Dilution and the concentration of ions

    Use c1V1=c2V2c_1V_1 = c_2V_2 to dilute a stock solution, and find the concentration of each ion when an ionic compound dissolves or two solutions are mixed.

  4. Why some substances dissolve in water

    Compare how ionic and molecular substances dissolve in water, using ion–dipole attractions, hydrogen bonds and dispersion forces to explain which dissolve and which do not.

  5. Saturation, temperature and solubility curves

    Classify solutions as unsaturated, saturated or supersaturated, explain how temperature changes the solubility of solids and gases, and use solubility curves to find crystallising masses and ion concentrations.

  6. Precipitation reactions

    Use the data book's solubility table to predict whether mixing two solutions forms a precipitate, then write the full equation, the ionic equation and the net ionic equation, all with states.

  7. Identifying ions in solution

    Analyse precipitation and acid–carbonate test results to identify the cations and anions in an unknown solution, and plan tests in an order that gives a clear answer.

  8. The pH scale

    Use pH=−log⁡10[HX+]\mathrm{pH} = -\log_{10}[\ce{H+}] to move between pH and hydrogen ion concentration for strong acids, and compare acidity on the logarithmic scale, where each unit is a factor of ten.

  9. Strong, weak, concentrated and dilute

    Use the Arrhenius model to explain how strong and weak acids and bases behave in water, write their ionisation equations, and keep strength and concentration apart.

  10. Reactions of acids

    Predict the products when acids react with bases, metals and carbonates, and write balanced full and ionic equations with states for each.

  11. Acid rain

    Trace sulfur dioxide from coal- and oil-fired power stations to acid rain, write the equations that form sulfuric and nitric acids, and explain the damage and how it is reduced.

  12. Blood, water quality and water treatment

    See blood plasma as an aqueous solution, explore why blood is red and how blood types work, then evaluate a waterway's quality from its measurements and follow how drinking water is treated.

  13. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Almost every reaction in your body, in a river or in a school laboratory happens in water. In this topic you find out why water is such an unusual liquid and such a good solvent, then learn the language and the arithmetic of solutions: solute and solvent, saturated and supersaturated, and concentration c=nVc = \frac{n}{V} in  mol L−1\unit{mol\,L^{-1}}.

With that in hand you predict which ions will meet and form a precipitate, using the solubility table in the QCAA formula and data book, and write full and net ionic equations with states. You use precipitates and fizzing to identify unknown ions, and solubility curves to find how much solid crystallises when a solution cools.

The second half is about acids. You meet the pH scale and why it is logarithmic, the Arrhenius model of strong and weak acids and bases, and the reactions of acids with bases, metals and carbonates. Finally, you apply it all to acid rain, blood, and the quality and treatment of the water you drink.

Before you start

Builds on Chemical reactions — reactants, products and energy change and Intermolecular forces and gases.

  • The mole concept, n=mMn = \frac{m}{M}, and molar mass from relative atomic masses (Unit 1 Topic 3).
  • Writing ionic formulas from ion charges, including polyatomic ions (Unit 1).
  • Balancing chemical equations with state symbols (Unit 1 Topic 3).
  • Polarity, VSEPR shapes and intermolecular forces: dispersion, dipole–dipole and hydrogen bonding (Unit 2 Topic 1).
  • Logarithms to base 10 on a calculator, and scientific notation.

What QCAA says you need to know27 dot points

Aqueous solutions and molarity

Identifying ions in solution

  • Apply ionic and chemical formulas to construct balanced ionic and chemical equations (including states) for precipitation reactions.LessonPrecipitation reactions
  • Apply solubility rules to predict if a precipitation will be formed.LessonPrecipitation reactions
  • Analyse data, including precipitation and acid-carbonate reactions, to determine the presence of specific ions in solutions.LessonIdentifying ions in solution

Solubility

pH

  • State that pH is dependent on the concentration of hydrogen ions in solution.LessonThe pH scale
  • Identify that the pH scale is a logarithmic scale.LessonThe pH scale
  • Apply the pH scale to compare the levels of acidity or alkalinity of aqueous solutions.LessonsThe pH scaleAcid rain
  • Apply the Arrhenius model to explain the behaviour of strong and weak acids and bases in aqueous solutions.LessonStrong, weak, concentrated and dilute

Reactions of acids

  • Determine balanced chemical and ionic equation (including states) for the reactions of acids with bases, metals and carbonates.LessonsReactions of acidsAcid rain

Science as a human endeavour

Science inquiry

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Water and hydrogen bonding

    Explain water's high boiling point, heat capacity, surface tension, solvent power and the low density of ice from its bent shape and hydrogen bonds.

    Practise
  • Describing solutions

    Use solute, solvent, solution, square brackets, and unsaturated, saturated and supersaturated precisely.

    Practise
  • Concentration, c=nVc = \frac{n}{V}

    Calculate concentration, moles, mass of solute or volume of solution with $c = \frac{n}{V}$ and $n = \frac{m}{M}$.

    Practise
  • Dilution and ion concentrations

    Use $c_1V_1 = c_2V_2$ for dilutions and find the concentration of each ion from a dissolved ionic compound.

    Practise
  • Ionic and molecular solubility

    Explain why a substance does or does not dissolve in water using the forces between its particles and water molecules.

    Practise
  • Solubility curves and temperature

    Read solubility curves, find the mass that crystallises on cooling, and explain how temperature affects solids and gases.

    Practise
  • Precipitation equations

    Predict precipitates with the data book's solubility table and write full and net ionic equations with states.

    Practise
  • Identifying ions

    Analyse precipitation and acid–carbonate test results to identify cations and anions, and plan a sequence of tests.

    Practise
  • The pH scale

    Convert between pH and $[\ce{H+}]$ for strong acids and compare acidity on the logarithmic scale.

    Practise
  • Strength, concentration and Arrhenius

    Use the Arrhenius model to explain strong and weak acids and bases, and keep strength and concentration apart.

    Practise
  • Reactions of acids

    Write full and ionic equations with states for acids with bases, metals and carbonates, and predict the observations.

    Practise
  • Acid rain, blood and water quality

    Apply solution and acid chemistry to acid rain, blood plasma and blood types, and the testing and treatment of water.

    Practise

Worked examples19

All 19

Common mistakes

Using millilitres in c=nVc = \frac{n}{V}

Concentration is in  mol L−1\unit{mol\,L^{-1}}, so VV must be in litres. 250 mL is 0.250 L. Using 250 makes the answer 1000 times too small.

Mixing up strong and concentrated

Strength is how completely an acid ionises; concentration is how much acid is in each litre. A dilute solution of a strong acid and a concentrated solution of a weak acid are both possible.

Reading pH as a linear scale

A solution of pH 2 is not twice as acidic as one of pH 4. Each unit is a factor of 10, so it has 102=10010^2 = 100 times the hydrogen ion concentration.

Leaving spectator ions in a net ionic equation

Ions that appear unchanged on both sides, like NaX+\ce{Na+} and NOX3X−\ce{NO3-} when silver chloride forms, are spectators. Cross them out: the net ionic equation is AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}.

Picking the wrong precipitate

After swapping partners, check both new combinations in the data book's solubility table. Only an "i" (insoluble) compound precipitates; sodium, potassium, ammonium and nitrate compounds never do.

Forgetting the ion count

In 0.10 mol L−10.10\unit{mol\,L^{-1}} CaClX2\ce{CaCl2} there are two chloride ions per formula unit, so [ClX−]=0.20 mol L−1[\ce{Cl-}] = 0.20\unit{mol\,L^{-1}}.

Forgetting the water in acid reactions

An acid and a base give a salt and water; an acid and a carbonate give a salt, water and carbon dioxide. Leaving out the water unbalances the equation.

Mixing up hydrogen and carbon dioxide

A metal and an acid give hydrogen gas (it burns with a squeaky pop). A carbonate and an acid give carbon dioxide (it turns limewater milky). Hydrogen comes only from the metal reactions.

Giving a precipitate or gas the state (aq)

A precipitate is (s), a gas given off is (g), and water formed is (l). Only dissolved species are (aq).

Splitting solids, gases and weak acids into ions

In an ionic equation only soluble ionic compounds and strong acids are written as separate ions. Keep precipitates, metals, insoluble bases, water, gases and weak acids as whole formulas.

Exam tips

  1. Show c=nVc = \frac{n}{V} (or n=mMn = \frac{m}{M}), the substitution with the volume in litres, and the answer with its unit and sensible significant figures, usually three.

  2. Write concentrations with square brackets and units: [ClX−]=0.200 mol L−1[\ce{Cl-}] = 0.200\unit{mol\,L^{-1}}.

  3. For a precipitation question, say which combination is insoluble according to the data book's solubility table before you write the equation.

  4. Every equation in this topic needs state symbols: (s), (l), (g) and (aq). Check atoms and charge balance before you move on.

  5. A pH has as many decimal places as the hydrogen ion concentration has significant figures: [HX+]=0.025 mol L−1[\ce{H+}] = 0.025\unit{mol\,L^{-1}} (2 s.f.) gives pH 1.60.

  6. "Compare the acidity" means a factor: write "100 times the hydrogen ion concentration", not "more acidic".

  7. When you explain solubility, name the forces on both sides: the forces broken in the solute and in water, and the attractions formed between them.

  8. In an ion-identification question, give the observation (colour of precipitate, gas, limewater), the inference (which ion), and the equation.

  9. "Evaluate" water quality means compare each measurement with a guideline value, say what it shows, and make a judgement.

Where this shows up

  • Hospitals give intravenous saline at 0.9 % (about 0.154 mol L−10.154\unit{mol\,L^{-1}} NaCl), matched to the concentration of ions in blood plasma.

  • Water treatment plants in Queensland use coagulation with alum, filtration, chlorination and pH adjustment, and the Gold Coast desalination plant uses reverse osmosis.

  • Farmers spread lime (calcium carbonate) to neutralise acidic soils, and pool owners balance pH with acid and sodium carbonate.

  • Antacid tablets use bases and carbonates to neutralise excess stomach acid.

  • Fish kills in warm, still waterways happen because warm water holds less dissolved oxygen.

  • Hand warmers that click and heat up are supersaturated sodium ethanoate solutions crystallising.

  • Flue-gas scrubbers at power stations and smelters remove sulfur dioxide before it can form acid rain.

  • Precipitation tests are used to detect lead in old paint, chloride in concrete, and sulfate in groundwater.

Save your progress with a free account