Lesson 7 of 11 · 15 min

Addition polymers from alkenes

Write equations for making polyethene (LDPE and HDPE), polypropene and PTFE from their monomers, and move between a monomer and its repeating unit.

What you will be able to do

  • Explain addition polymerisation as the opening of the carbon–carbon double bond, with no other product.
  • Write equations for the formation of polyethene, polypropene and polytetrafluoroethene with displayed repeating units.
  • Describe how LDPE and HDPE are made under different conditions and why their structures differ.
  • Draw the repeating unit from a monomer and the monomer from a repeating unit.

In the last topic you met polyethene, polypropene and PTFE as materials: what their chains look like and why that gives them their properties. Now the question is how they are made. Every one starts from a small molecule with a C=C\ce{C=C} double bond.

Key idea

Addition polymerisation

In addition polymerisation, the double bond of each monomer opens and the monomers join end to end into a long chain of single C−C\ce{C-C} bonds. No atoms are lost: the polymer is the only product, so its repeating unit has exactly the same atoms as the monomer.

Interactive

Grow an addition polymer

Join monomers one at a time. Watch which bond breaks and which bonds form, and compare the repeating unit with the monomer.

To write the equation, put nn in front of the monomer, draw the monomer with the double bond as a single bond, put it in brackets with the two open bonds passing through the brackets, and write nn after the bracket. The nn is a large number, typically thousands.

Polyethene from ethene.

Polypropene from propene. The CHX3\ce{CH3} group is not part of the backbone: it hangs off every second carbon.

Polytetrafluoroethene (PTFE, Teflon) from tetrafluoroethene.

Common mistake

No water, no by-product

Students sometimes add HX2O\ce{H2O} to an addition polymerisation equation by analogy with condensation polymers. There is nothing to lose: two electrons from the C=C\ce{C=C} simply form the new bond to the next monomer. Check that the repeating unit has the same molecular formula as the monomer.

What is the molecular formula of the repeating unit of polypropene?

Reads asYour answer shows here as chemistry.
Two ways to make polyethene, and the polymer each gives.
FeatureLDPE (low-density polyethene)HDPE (high-density polyethene)
ConditionsVery high pressure (about 100–300 MPa), about 200 °C, a trace of oxygen or a peroxide to start the reactionLow pressure (a few atmospheres), about 50–100 °C, Ziegler–Natta catalyst
ChainsMany side branchesFew or no branches
PackingBranches keep the chains apart; mostly amorphousStraight chains pack closely; highly crystalline
PropertiesSoft, flexible, lower melting point (about 110 °C), density 0.91–0.93 g cm⁻³Stiffer and stronger, higher melting point (about 130 °C), density 0.94–0.97 g cm⁻³
UsesCling wrap, squeeze bottles, bagsMilk bottles, crates, pipes

LDPE and HDPE have the same equation and the same repeating unit. The different conditions change how the chains grow: at very high pressure the growing chains often bite back on themselves and sprout branches, while a Ziegler–Natta catalyst adds each monomer to the end of a straight chain. Fewer branches means closer packing, stronger dispersion forces between chains, and a denser, stiffer, higher-melting plastic.

Interactive

LDPE and HDPE chains

Compare how closely the branched and unbranched chains pack.

Worked example

Find the monomer of an addition polymer

  • Simple familiar
  • Technology free

Part of a polymer chain is shown in condensed form: −CHX2−CHCl−CHX2−CHCl−CHX2−CHClX−\ce{-CH2-CHCl-CH2-CHCl-CH2-CHCl-}. Identify the repeating unit, name and draw the monomer, and write the equation for the polymerisation.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the smallest repeating section of the backbone: two carbons for an addition polymer.

  2. Keep the substituents on the same carbons and put back the C=C\ce{C=C}.

  3. nn before the monomer, repeating unit in brackets with nn, no other product.

Watch out for

  • Taking a three- or four-carbon section as the repeating unit.

  • Moving the Cl to the other carbon, or putting a Cl on both.

Write a condensed structural formula for the monomer of PTFE.

Reads asYour answer shows here as chemistry.

Exam tip

Drawing polymer equations

  • nn in front of the monomer and nn outside the bracket.
  • Draw the monomer with its double bond; draw the repeating unit with single bonds and every atom (H, F, CHX3\ce{CH3}) shown.
  • The bonds at each end of the repeating unit must pass through the brackets.
  • Substituents stay on the same carbons: in polypropene the CHX3\ce{CH3} is on every second backbone carbon.

Summary

  • Addition polymers form when the C=C\ce{C=C} of each monomer opens; nothing else is produced.

  • The repeating unit has the same atoms as the monomer, drawn with single bonds in brackets with nn.

  • Polyethene from ethene, polypropene from propene, PTFE from tetrafluoroethene.

  • LDPE (high pressure, branched) and HDPE (Ziegler–Natta catalyst, unbranched) share an equation but differ in packing, density and strength.

  • To find the monomer from a repeating unit, take two backbone carbons and restore their double bond.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 7 of 110% read

Save your progress with a free account