Chemistry · Unit 3 · Topic 1

Chemical equilibrium systems

Reversible reactions and dynamic equilibrium, Le Châtelier's principle, Kc, Q and Ksp calculations, acids and bases, pH and Kw, the Brønsted–Lowry model, Ka and Kb, indicators and titrations.

  • 13 lessons
  • 4 h 6 min of lessons
  • 22 worked examples
  • 25 hours in the syllabus
0 of 13

Start here

Reversible reactions and dynamic equilibrium

Lesson 1 of 13 · 20 min

Start the topic

Lessons

13
  1. Reversible reactions and dynamic equilibrium (up next)

    Tell open from closed systems, explain why some reactions are reversible, and recognise dynamic equilibrium and its position from properties and concentration–time graphs.

  2. Le Châtelier's principle

    Predict how changing a concentration or the pressure, or adding a catalyst, affects a system at equilibrium, and explain the shift with collision theory and the graphs it produces.

  3. Temperature, enthalpy and the equilibrium constant

    Use the enthalpy change to predict how heating or cooling shifts an equilibrium, explain it with collision theory, and say how KcK_c changes.

  4. The equilibrium law, Kc and Q

    Write the equilibrium law for homogeneous and heterogeneous systems, judge the extent of a reaction from KcK_c, and compare QQ with KcK_c to predict which way a mixture shifts.

  5. Calculating Kc and equilibrium concentrations

    Calculate KcK_c from equilibrium data, use ICE tables when only some concentrations are known, and find equilibrium concentrations, stating the small-KcK_c assumption when you use it.

  6. Solubility products and precipitation

    Write KspK_{sp} expressions, convert between solubility and KspK_{sp}, and compare QQ with KspK_{sp} to predict whether mixing two solutions forms a precipitate.

  7. Strong, weak, concentrated and dilute

    Classify acids by the protons they donate, name the strong and weak acids and bases, and separate strength from concentration using dissociation, pH, conductivity and rate.

  8. pH, pOH and the ionic product of water

    Use Kw=[HX+][OHX−]K_w = [\ce{H+}][\ce{OH-}] to move between hydrogen and hydroxide ion concentrations, and calculate pH and pOH for strong acids and bases, including dilution and mixing.

  9. The Brønsted–Lowry model and buffers

    Describe acid–base reactions as proton transfers between conjugate pairs, find conjugate acids and bases, recognise amphiprotic species, and explain buffers and ocean carbon dioxide with Le Châtelier's principle.

  10. Dissociation constants: Ka, Kb, pKa and pKb

    Write KaK_a and KbK_b expressions, calculate them from pH, calculate the pH of weak acids and bases, use Kw=Ka×KbK_w = K_a \times K_b, and rank acids by strength.

  11. Acid–base indicators

    Explain how an indicator works as a weak acid with coloured conjugate forms, why it changes colour at pH=pKa\mathrm{pH} = \mathrm{p}K_a over about pKa±1\mathrm{p}K_a \pm 1, and choose one for a titration.

  12. Titration curves

    Sketch and interpret pH titration curves for strong and weak acids and bases, finding the starting pH, equivalence point, buffer region and pH=pKa\mathrm{pH} = \mathrm{p}K_a, and read conductometric titration curves.

  13. Volumetric analysis calculations

    Calculate unknown concentrations, moles and masses from titration data with a standard solution, using concordant titres, the mole ratio, diprotic acids and dilution factors.

  14. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Open a bottle of soft drink and it fizzes. Leave it capped and nothing seems to happen, yet carbon dioxide is still dissolving and escaping, at exactly the same rate. That balance, where forward and reverse reactions run at equal rates and nothing observable changes, is dynamic equilibrium, and it is the idea this whole topic is built on.

You start with what equilibrium is and how to read it from concentration–time graphs. Then you disturb it: change a concentration, the pressure or the temperature and the system shifts in a way Le Châtelier's principle predicts and collision theory explains. Next the numbers: the equilibrium constant KcK_c measures where the balance lies, the reaction quotient QQ tells you which way a mixture will move, and the solubility product KspK_{sp} tells you whether a precipitate will form.

The second half applies equilibrium to acids and bases. You will separate strong from concentrated and weak from dilute, calculate pH and pOH with KwK_w, describe acids as proton donors with the Brønsted–Lowry model, and use KaK_a and KbK_b to compare weak acids and bases. It ends in the laboratory with indicators, titration curves and the volumetric analysis that finds an unknown concentration from a titre.

The science understanding dot points are assessed in the external exam (Papers 1 and 2, both with a calculator). The science as a human endeavour and science inquiry points — wine, the oceans and carbon dioxide, Eunice Newton Foote, superacids, and the suggested investigations — appear as lesson contexts and practical data analysis for your internal assessments.

Before you start

Builds on Chemical reactions — reactants, products and energy change, Aqueous solutions and acidity and Rates of chemical reactions.

  • Balancing chemical and ionic equations with state symbols (Unit 1).
  • Enthalpy change: exothermic ΔH<0\Delta H < 0, endothermic ΔH>0\Delta H > 0, and energy profile diagrams with activation energy (Unit 1).
  • Moles, n=mMn = \frac{m}{M}, and concentration, c=nVc = \frac{n}{V}, with volumes in litres, and dilution c1V1=c2V2c_1V_1 = c_2V_2 (Units 1 and 2).
  • Collision theory and the factors that affect the rate of a reaction, including catalysts (Unit 2).
  • Acids, bases and neutralisation, and pH=−log⁡10[HX+]\mathrm{pH} = -\log_{10}[\ce{H+}] for simple strong acids (Unit 2).
  • Solubility rules from the data book, and ionic and net ionic equations for precipitation (Unit 2).
  • Logarithms and powers of ten on a calculator, scientific notation and significant figures.

What QCAA says you need to know61 dot points

Chemical equilibrium

3 hours

Factors that affect equilibrium

3 hours

Equilibrium constants

6 hours
  • Identify that the equilibrium constant (KcK_c) indicates the relationship between product and reactant concentrations at equilibrium.LessonThe equilibrium law, Kc and Q
  • Identify that the solubility product (KspK_{sp}) gives a measure of the solubility of an ionic compound.LessonSolubility products and precipitation
  • Determine the equilibrium law expression for homogeneous and heterogeneous systems.LessonThe equilibrium law, Kc and Q
  • Determine the extent of a reaction from the magnitude of the equilibrium constant (KcK_c).LessonThe equilibrium law, Kc and Q
  • Calculate the reaction quotient (QQ) for reversible reactions (Formula: Q=[C]c[D]d[A]a[B]bQ = \frac{[C]^c[D]^d}{[A]^a[B]^b} for the reaction aA+bB⇌cC+dDa\mathrm{A} + b\mathrm{B} \rightleftharpoons c\mathrm{C} + d\mathrm{D})LessonThe equilibrium law, Kc and Q
  • Calculate equilibrium constants (KcK_c) and the concentrations of reactants and products. Assume [reactants]initial=[reactants]equilibrium[\text{reactants}]_{\text{initial}} = [\text{reactants}]_{\text{equilibrium}} when KcK_c is very small and state assumption when used. (Formula: Kc=[C]c[D]d[A]a[B]bK_c = \frac{[C]^c[D]^d}{[A]^a[B]^b} for the reaction aA+bB⇌cC+dDa\mathrm{A} + b\mathrm{B} \rightleftharpoons c\mathrm{C} + d\mathrm{D})LessonCalculating Kc and equilibrium concentrations
  • Calculate solubility products (KspK_{sp}) and the concentrations of ions in aqueous solutions. (Formula: Ksp=[C]c[D]dK_{sp} = [C]^c[D]^d for the reaction aA(s)⇌cC(aq)+dD(aq)a\mathrm{A(s)} \rightleftharpoons c\mathrm{C(aq)} + d\mathrm{D(aq)})LessonSolubility products and precipitation
  • Infer shifts in equilibrium reactions using equilibrium constants (KcK_c) and reaction quotients (QQ).LessonsThe equilibrium law, Kc and QSolubility products and precipitation
  • Analyse data to determine reaction quotients (QQ), equilibrium constants (KcK_c), the concentrations of reactants and products and the concentration of ions in aqueous solutions.LessonsThe equilibrium law, Kc and QCalculating Kc and equilibrium concentrationsSolubility products and precipitation

Properties of acids and bases, and pH

4 hours

Brønsted–Lowry model and dissociation constants

4 hours

Acid–base indicators and volumetric analysis

5 hours
  • Identify that acid-base indicators are a weak acid or a weak base where the conjugate acid-base pair have different colours and can be represented by HIn(aq)⇌HX+(aq)+InX−(aq)\ce{HIn(aq) <=> H+(aq) + In-(aq)} or BOH(aq)⇌BX+(aq)+OHX−(aq)\ce{BOH(aq) <=> B+(aq) + OH-(aq)}.LessonAcid–base indicators
  • Identify that indicators change colour when pH=pKa\mathrm{pH} = \mathrm{p}K_a.LessonAcid–base indicators
  • Explain the relationship between the pH range, the end point and the pKa\mathrm{p}K_a value of an acid-base indicator.LessonAcid–base indicators
  • Analyse data to determine an appropriate indicator given the equivalence point of the titration and the pH range of the indicator (assuming indicators change colour over a range of pKa±1\mathrm{p}K_a \pm 1).LessonAcid–base indicators
  • Discriminate between the terms end point and equivalence point.LessonsAcid–base indicatorsTitration curves
  • Sketch the general shapes of conductometric and acid-base titration curves involving strong and weak acids and bases. (Titration of weak acids to weak bases is not required.)LessonTitration curves
  • Interpret acid-base titration curves to determine the intercept with pH axis, equivalence point, buffer region and points where pKa=pH\mathrm{p}K_a = \mathrm{pH} or pKb=pOH\mathrm{p}K_b = \mathrm{pOH}.LessonTitration curves
  • Interpret conductometric titration curves to determine the intercept with conductivity axis, equivalence point and volume of titrant.LessonTitration curves
  • Analyse volumetric data, including solubility, conductometric and acid-base titration curves, to determine moles, mass, volume and concentration.LessonsSolubility products and precipitationTitration curvesVolumetric analysis calculations
  • Analyse titration curves to calculate the concentration of a solution with reference to a standard solution.LessonVolumetric analysis calculations

Science as a human endeavour

Science inquiry

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Reversible reactions and dynamic equilibrium

    Tell open from closed systems, write equations with ⇌, explain dynamic equilibrium with activation energies, and read the position of equilibrium from concentration–time graphs.

    Practise
  • Le Châtelier's principle

    Predict and explain with collision theory how concentration, pressure, temperature and a catalyst affect an equilibrium and the value of K, and read the graphs of a disturbance.

    Practise
  • Equilibrium law expressions

    Write $K_c$ and $K_{sp}$ expressions for homogeneous and heterogeneous systems, and judge the extent of a reaction from the size of $K_c$.

    Practise
  • Q and the direction of shift

    Calculate $Q$ and compare it with $K_c$ or $K_{sp}$ to predict which way a mixture shifts or whether a precipitate forms.

    Practise
  • Calculating Kc and concentrations

    Calculate $K_c$ from equilibrium data and use ICE tables, including the small-$K_c$ assumption, to find equilibrium concentrations.

    Practise
  • Solubility products

    Calculate $K_{sp}$ from a solubility and the reverse, find ion concentrations, and predict precipitation, including the common ion effect.

    Practise
  • Strong, weak, concentrated and dilute

    Classify acids and bases, separate strength from concentration, and compare them by dissociation, rate of reaction, pH and conductivity.

    Practise
  • pH, pOH and Kw

    Use $K_w$, pH and pOH to move between $[\ce{H+}]$, $[\ce{OH-}]$, pH and pOH for strong acids and bases, including dilution.

    Practise
  • Conjugate acid–base pairs

    Describe acids and bases with the Brønsted–Lowry model, write proton-transfer equations, find conjugates and recognise amphiprotic species.

    Practise
  • Buffers and the oceans

    Explain with Le Châtelier's principle how a buffer resists a change in pH, and how the oceans take up carbon dioxide through linked equilibria.

    Practise
  • Ka, Kb, pKa and pKb

    Write $K_a$ and $K_b$ expressions, calculate them and pH for weak acids and bases, use $K_w = K_a \times K_b$, and compare acid strengths.

    Practise
  • Choosing an indicator

    Explain how an indicator works, that it changes colour at $\mathrm{pH} = \mathrm{p}K_a$ over about $\mathrm{p}K_a \pm 1$, and choose one for a titration's equivalence point.

    Practise
  • Titration curves

    Distinguish end point from equivalence point, and sketch and interpret pH and conductometric titration curves.

    Practise
  • Titration calculations

    Calculate concentrations, moles and masses from titration data with a standard solution, including dilutions, diprotic acids and concordant titres.

    Practise

Worked examples22

All 22

Common mistakes

Thinking equilibrium means equal concentrations

At equilibrium the rates are equal, not the concentrations. [products][\text{products}] and [reactants][\text{reactants}] are constant, and usually different; their ratio is fixed by KcK_c.

Saying a catalyst shifts the equilibrium

A catalyst speeds up the forward and reverse reactions by the same factor. Equilibrium is reached sooner, but its position and KcK_c do not change.

Thinking K changes when you add a reactant or change the pressure

Only a change of temperature changes KcK_c. Concentration and pressure changes move the position of equilibrium until QQ equals the same KcK_c again.

Putting solids, liquids or the solvent into K

Leave pure solids and liquids out of KcK_c and KspK_{sp}, and leave out water when it is the solvent. CaCOX3(s)⇌CaO(s)+COX2(g)\ce{CaCO3(s) <=> CaO(s) + CO2(g)} has Kc=[COX2]K_c = [\ce{CO2}].

Forgetting the powers

Each concentration is raised to the power of its coefficient. For PbIX2(s)⇌PbX2+(aq)+2 IX−(aq)\ce{PbI2(s) <=> Pb^2+(aq) + 2I-(aq)}, Ksp=[PbX2+][IX−]2K_{sp} = [\ce{Pb^2+}][\ce{I-}]^2 and [IX−]=2s[\ce{I-}] = 2s, so Ksp=4s3K_{sp} = 4s^3.

Mixing up pH and pOH

pH comes from [HX+][\ce{H+}] and pOH from [OHX−][\ce{OH-}]. For a base, find pOH first and then pH=14.00−pOH\mathrm{pH} = 14.00 - \mathrm{pOH}. A base with a pH below 7 is a sign of the slip.

Treating a weak acid as fully ionised

[HX3OX+][\ce{H3O+}] of 0.10 mol L−10.10\unit{mol\,L^{-1}} ethanoic acid is about 1.3×10−3 mol L−11.3 \times 10^{-3}\unit{mol\,L^{-1}}, not 0.10 mol L−10.10\unit{mol\,L^{-1}}. Use KaK_a for a weak acid.

Diluting ten-fold and changing pH by 10

A ten-fold dilution of a strong acid divides [HX+][\ce{H+}] by 10, which raises pH by one unit. Diluting an acid never takes its pH past 7.

Calling the end point the equivalence point

The equivalence point is a mole ratio; the end point is a colour change. Choose an indicator whose colour change range falls on the steep part of the curve, so the two coincide.

Choosing an indicator by its colour

Choose by the pH range of the colour change, not by the colours. The range must lie within the vertical part of the curve around the equivalence point.

Thinking a buffer neutralises any amount of acid

A buffer only resists small additions. Once the conjugate base (or acid) is used up, the pH changes sharply.

Using Ka × Kb = Kw for unrelated species

Ka×Kb=KwK_a \times K_b = K_w only links an acid and its own conjugate base, such as NHX4X+\ce{NH4+} and NHX3\ce{NH3}.

Exam tips

  1. The data book gives QQ, KcK_c, KspK_{sp}, KwK_w, pH, pOH, KaK_a, KbK_b and Kw=Ka×KbK_w = K_a \times K_b. It does not give pH+pOH=14\mathrm{pH} + \mathrm{pOH} = 14, pKa=−log⁡Ka\mathrm{p}K_a = -\log K_a or the dilution formula, so learn them.

  2. When you use the small-KK approximation, write it down: "Assume [HA]eq≈[HA]initial[\ce{HA}]_{eq} \approx [\ce{HA}]_{initial} because KaK_a is very small." The syllabus asks you to state it, and markers look for it.

  3. For Le Châtelier questions, a full answer has three parts: what changes, which way the equilibrium shifts and why (to partially oppose the change), and what you would observe. "Explain" questions also want collision theory: which rate increases more.

  4. Give pH to two decimal places (the number of decimal places in pH matches the significant figures in [HX+][\ce{H+}]), and concentrations to the significant figures of the data, usually three.

  5. In titration calculations, write the balanced equation first and show the mole ratio in your working. Convert every volume to litres, and carry the dilution factor of an aliquot back to the original solution.

  6. Average only concordant titres (within 0.10 mL0.10\unit{mL} of each other). Leave out the rough titre.

  7. Sketches of titration curves need labelled axes, the starting pH, the equivalence point (with its volume and approximate pH) and, for a weak acid or base, the buffer region and the half-equivalence point.

  8. Check reasonableness: a weak acid's pH is higher than a strong acid's at the same concentration, KspK_{sp} values of sparingly soluble salts are tiny, and a pH beyond 0–14 needs a very concentrated solution.

Where this shows up

  • Winemaking: controlling acidity, sulfur dioxide preservative equilibria and cold stabilisation of tartrate crystals.

  • The oceans and climate: carbon dioxide dissolving in seawater, carbonate equilibria, ocean acidification and coral reefs.

  • Blood chemistry: the carbonic acid–hydrogen carbonate buffer that holds blood pH near 7.4.

  • Industry: choosing conditions for the Haber and contact processes (Unit 4) is equilibrium and rate in balance.

  • Water quality and agriculture: pH of pools, soils and drinking water, and the titrations laboratories use to check them.

  • Medicine: kidney stones and dental fluoride treatments are solubility equilibria; antacids are neutralisation in the stomach.

  • Food analysis: titrating the acid in vinegar, juice and wine, and the vitamin C content of food.

Save your progress with a free account