Lesson 3 of 11 · 15 min
Two ways to make ethanol
Write the equations for making ethanol by fermenting glucose and by hydrating ethene, explain the conditions of each, and compare the two routes.
What you will be able to do
- Write the equation for fermentation, , and the conditions yeast needs.
- Write the equation for the hydration of ethene, , and explain its conditions.
- Explain how enzymes give fermentation an economically viable rate at a low temperature.
- Compare the two routes for raw materials, rate, purity, type of process and sustainability.
Ethanol is a solvent, a disinfectant, a feedstock for other chemicals and, in E10 petrol, a fuel. There are two industrial routes to it. One is thousands of years old and uses living yeast; the other uses ethene from crude oil and a catalyst at high pressure. Each suits different circumstances.
Key idea
Fermentation
Enzymes in yeast (together called zymase) convert glucose from sugar cane, grain or other plant material into ethanol and carbon dioxide.
| Condition | Reason |
|---|---|
| Yeast (its enzymes are the catalyst) | Enzymes lower the activation energy enough for a useful rate at body-like temperatures. |
| About 30–40 °C (often 35 °C) | Fast enough, but below the temperature at which the enzymes denature and stop working. |
| No oxygen (anaerobic) | With oxygen, yeast respires glucose all the way to and , and bacteria can oxidise ethanol to ethanoic acid. |
| Aqueous solution, pH about 4–5 | Yeast enzymes work best in mildly acidic water. |
Fermentation stops when the ethanol reaches about 15 % by volume, because ethanol poisons the yeast. It is a batch process: a tank is filled, left for several days, then emptied. Fractional distillation then concentrates the ethanol to about 95 %.
Key idea
Hydration of ethene
Ethene from cracking crude oil or natural gas reacts with steam over a phosphoric acid catalyst ( coated on silica) at about and .
Water adds across the double bond: an addition reaction. All the atoms of both reactants end up in ethanol.
The hydration reaction is another compromise. It is exothermic and 2 mol of gas become 1 mol, so a low temperature and a high pressure would favour ethanol. But at low temperature the rate is too slow, and at very high pressure ethene polymerises and the equipment costs more. At 300 °C and 6–7 MPa only about 5 % of the ethene reacts per pass, so the ethanol is condensed out and the unreacted ethene is recycled, giving an overall conversion of about 95 %. It is a continuous process that runs day and night.
Write the balanced equation, with state symbols, for the industrial hydration of ethene.
Worked example
Ethanol and carbon dioxide from fermenting glucose
A distillery ferments of glucose. The yield of ethanol is 85.0 %. Calculate (a) the mass of ethanol produced and (b) the volume of carbon dioxide released, measured at STP. Give both answers to three significant figures.
Step 1: Write the balanced equation
Step 2: Moles of glucose
Step 3: Theoretical moles of ethanol and carbon dioxide
The ratio is , so .
Step 4: Apply the 85.0 % yield
Ethanol and carbon dioxide form together in a 1 : 1 ratio, so the same fraction of each is produced.
Step 5: Mass of ethanol
Step 6: Volume of carbon dioxide at STP
Try it yourself first, then check the working one step at a time.
Answer
(a) of ethanol; (b) of carbon dioxide at STP.
Method
Balanced equation, then moles of the reactant.
Mole ratio to the product, then multiply by the percentage yield as a decimal.
for a mass; for a gas at STP.
Watch out for
Using a 1 : 1 ratio for glucose to ethanol.
Applying the yield twice, or dividing by it instead of multiplying.
Fermentation
- Raw material: sugars from crops or plant waste. Renewable.
- Conditions: 35 °C, 1 atm, yeast enzymes. Little energy for heating.
- Rate: slow, days per batch.
- Process: batch.
- Product: about 15 % ethanol in water, needs energy-hungry distillation.
- Atom economy: 51 % ( is a by-product).
Hydration of ethene
- Raw material: ethene from crude oil or natural gas. Non-renewable.
- Conditions: 300 °C, 6–7 MPa, . High energy and equipment costs.
- Rate: fast.
- Process: continuous.
- Product: nearly pure ethanol.
- Atom economy: 100 % (one product).
A country with plenty of sugar cane and no oil reserves wants to produce fuel ethanol. Which statement best supports choosing fermentation?
Exam tip
States in the two equations
Fermentation happens in water, so glucose and ethanol are (aq) and carbon dioxide bubbles off as (g). Hydration happens at 300 °C, so all three are (g). Use for fermentation and for hydration.
Summary
Fermentation: , yeast enzymes, about 35 °C, anaerobic, batch, renewable.
Hydration: , , about 300 °C and 6–7 MPa, continuous, from fossil fuels.
Enzymes give fermentation an economically viable rate at a temperature low enough not to denature them.
Hydration has 100 % atom economy and gives pure ethanol quickly; fermentation uses renewable feedstocks and little energy.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.