Ignoring lone pairs when naming the shape
Lone pairs set the arrangement of electron pairs, but the shape is named from the atoms only. has four pairs (tetrahedral arrangement) but its shape is pyramidal; is bent, not tetrahedral and not linear.
Chemistry · Unit 2 · Topic 1
Predict molecular shapes with VSEPR, decide polarity, explain boiling points and solubility with intermolecular forces, analyse chromatograms with values, and solve gas problems with molar volume and .
Count the bonding and lone pairs on a central atom, then use VSEPR theory to name the shape and bond angle of linear, bent, trigonal planar, tetrahedral and pyramidal molecules.
Use data-book electronegativities to find polar bonds, then use the molecule's shape and symmetry to decide whether the bond dipoles cancel or the molecule is polar.
Identify the intermolecular forces between molecules of a substance (dispersion forces, dipole–dipole attractions and hydrogen bonding) and decide which is the strongest.
Use the nature and strength of intermolecular forces to explain and predict the melting and boiling points, vapour pressures and solubilities of molecular substances.
Explain how paper and thin-layer chromatography separate a mixture by the competing attractions of the mobile and stationary phases, carry out the method well, and see how GC and HPLC extend the idea.
Calculate values from a paper or TLC chromatogram, identify the components of a mixture by comparison with standards, and judge whether a substance is pure.
Use the kinetic theory to explain gas pressure and how it changes with volume, temperature and amount of gas, and identify when real gases behave like ideal gases.
Explain and use the relationships between the pressure, volume and kelvin temperature of a fixed amount of gas, analyse P–V–T data from experiments, and apply them to safe scuba diving.
Use with consistent units to find the pressure, volume, amount, mass or temperature of a gas, and use the molar volume of 22.7 L mol⁻¹ at STP.
Combine the mole ratio from a balanced equation with molar volume or to calculate the volume of a gas made or used in a reaction, or the mass of a reactant needed.
Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.
Why is water a liquid at room temperature when methane, a molecule of almost the same mass, is a gas? Why does a drop of ink spread into coloured bands on wet paper? Why must a scuba diver never hold their breath on the way up? Each answer comes down to how molecules are shaped and how strongly they attract one another.
In this topic you start with the shapes of small molecules, predicted by valence shell electron pair repulsion (VSEPR) theory. Shape and electronegativity together tell you whether a molecule is polar, and polarity decides which intermolecular forces act between molecules: dispersion forces, dipole–dipole attractions and hydrogen bonding. Those forces explain melting and boiling points, vapour pressure and solubility, and they are what chromatography uses to separate a mixture.
Then you turn to gases, where the particles are so far apart that intermolecular forces hardly matter. The kinetic theory explains pressure, and the relationships between pressure, volume and temperature follow from it. You finish with the molar volume at STP and the ideal gas equation , and use them to find the mass or volume of a gas made or used in a reaction.
Builds on Properties and structure of atoms and Chemical reactions — reactants, products and energy change.
Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).
The focus areas you can practise on their own. Each one maps to dot points above.
VSEPR shapes and bond angles
Count bonding and lone pairs on a central atom, name the shape and give its bond angle, and represent it in 2D and 3D.
Polar and non-polar molecules
Use data-book electronegativities for bond polarity, then shape and symmetry to decide whether the whole molecule is polar.
Identifying intermolecular forces
Name every intermolecular force between molecules of a substance and decide which is strongest.
Explaining physical properties
Use intermolecular forces to explain and predict boiling and melting points, vapour pressure and solubility.
How chromatography separates
Explain separation by the competing attractions of the mobile and stationary phases, the method, and GC and HPLC.
Chromatograms and values
Calculate $R_F$ values, identify components by comparison with standards, and judge purity from a chromatogram.
Kinetic theory of gases
Use the kinetic theory to explain pressure and how it changes with volume, temperature and amount, and say when gases behave ideally.
Pressure, volume and temperature
Apply Boyle's, Charles's and Gay-Lussac's relationships, analyse P–V–T data and graphs, and apply them to scuba diving.
Molar volume at STP
Convert between moles, volume at STP and mass using $V = n \times 22.7\ \mathrm{L\,mol^{-1}}$.
Using
Solve the ideal gas equation for any variable, with temperatures in kelvin and consistent pressure and volume units.
Gases in chemical reactions
Combine mole ratios from a balanced equation with molar volume or $PV = nRT$ to find a gas volume or a mass.
Lone pairs set the arrangement of electron pairs, but the shape is named from the atoms only. has four pairs (tetrahedral arrangement) but its shape is pyramidal; is bent, not tetrahedral and not linear.
, and all have polar bonds, but their symmetric shapes make the bond dipoles cancel, so the molecules are non-polar. Check the shape before you decide.
A hydrogen bond is an attraction between molecules (an H on N, O or F of one molecule and a lone pair on N, O or F of another). The O–H bonds inside a water molecule are covalent bonds, not hydrogen bonds. Boiling water does not break O–H bonds.
Dispersion forces act between all molecules, polar or not. In large molecules they can outweigh dipole–dipole attractions: (non-polar) boils at 77 °C, above (polar) at 61 °C.
Measure both distances from the baseline: to the centre of the spot, and to the solvent front. Measuring from the bottom edge of the paper, or using the length of the whole paper, gives the wrong ratio.
Every gas calculation needs kelvin. 25 °C is 298 K. Using 25 makes the answer about 12 times too big or too small, and at 0 °C it divides by zero.
works with kPa and L (kPa × L = J) or with Pa and m³ (Pa × m³ = J). Mixing them puts the answer out by a factor of 1000. Convert mL to L by dividing by 1000.
is only for 273 K and 100 kPa. At any other temperature or pressure, use .
Molar volume applies to gases only. One mole of liquid water at 0 °C occupies about 18 mL, not 22.7 L.
Boiling and melting overcome the intermolecular forces between molecules. The covalent bonds within each molecule stay intact: steam is still molecules.
For a shape, show your reasoning chain: the Lewis structure, the number of bonding regions and lone pairs on the central atom, the arrangement, then the shape and its angle.
For polarity, use the data book's electronegativities (page 7) for each bond, then the shape: "the C=O bonds are polar (3.4 − 2.6 = 0.8) but the linear shape is symmetric, so the dipoles cancel and is non-polar".
When you explain a difference in boiling points, name the strongest force for each substance, compare their strengths, and link stronger forces to more energy needed to separate the molecules.
When you compare dispersion forces, mention the number of electrons (or molar mass) and the shape or contact area.
has no unit and must be between 0 and 1. Give it to two significant figures unless the distances justify more.
The data book gives , , STP (273 K, 100 kPa) and the molar volume (22.7 L mol⁻¹ at STP). Boyle's and Charles's laws are not given; derive them from if you need them.
Write the units on every substitution. A pressure in kPa and a volume in L (dm³) give the right answer with .
In a gas stoichiometry question, find moles of the known substance, use the mole ratio from the balanced equation, then convert to a volume or a mass. One line for each step.
Evaluating an experiment (Boyle's law, molar volume, chromatography) needs a specific limitation, its effect on the result and a specific improvement.
Forensic science: chromatography of inks, fibres and dyes, and GC–MS of drugs, poisons and fire accelerants.
Sports anti-doping and drug testing: HPLC and GC separate a urine or blood sample so banned substances can be identified and measured.
Food and environmental testing: HPLC for caffeine and preservatives in drinks, GC for pesticide residues in produce.
Scuba diving: dive tables, air consumption at depth and the rule never to hold your breath while ascending all come from the gas laws.
Car airbags, which fill in milliseconds with nitrogen made by a reaction whose mass is chosen with .
Medicine design, where the shape and polarity of a drug molecule decide how it fits and binds to its target protein.
Weather balloons, which expand as they rise into lower pressure, and tyres, whose pressure rises on a hot road.
Refrigerants and aerosols, chosen for their boiling points and vapour pressures, which come from their intermolecular forces.