Lesson 4 of 10 · 18 min
Boiling points, vapour pressure and solubility
Use the nature and strength of intermolecular forces to explain and predict the melting and boiling points, vapour pressures and solubilities of molecular substances.
What you will be able to do
- Explain why stronger intermolecular forces give higher melting and boiling points and lower vapour pressures.
- Rank molecular substances by boiling point using the type of force, the number of electrons and molecular shape.
- Explain the boiling point trends of the hydrides of groups 14 to 17.
- Explain solubility in water and in non-polar solvents with "like dissolves like".
To melt a molecular solid or boil a liquid, you must give the molecules enough energy to pull away from their neighbours. The stronger the intermolecular forces, the more energy that takes, and the higher the temperature must be. That one idea explains melting points, boiling points, vapour pressure and much of solubility.
Key idea
Stronger intermolecular forces mean…
- higher melting and boiling points: more energy is needed to separate the molecules;
- lower vapour pressure: fewer molecules have enough energy to escape the liquid surface at a given temperature, so the substance is less volatile.
To compare two substances, name the strongest force in each, then compare the strength. When the type of force is the same, compare the number of electrons (or molar mass) and the shape.
Boiling points (in kelvin) of the hydrides of groups 14 to 17 at 101 kPa. , and break the trend because their molecules form hydrogen bonds.
Read the graph in two steps. Going down each group (periods 3 to 5), boiling points rise because the molecules have more electrons and stronger dispersion forces. Group 14 hydrides are non-polar tetrahedral molecules, so dispersion is all they have, and they follow the trend all the way from .
The period 2 hydrides of groups 15 to 17 (, , ) should be the lowest of their groups on dispersion alone, yet they are the highest or close to it. Their H atoms are bonded to N, O or F, so they form hydrogen bonds, which are much stronger than the dipole–dipole attractions of , or .
Worked example
Explaining the boiling points of the group 16 hydrides
The boiling points of the group 16 hydrides at 101 kPa are: 100 °C, −60 °C, −41 °C and −2 °C. The graph shows the same data in kelvin. All four molecules are bent.
(a) Explain the trend from to .
(b) Explain why water does not follow the trend.
(c) Predict what the boiling point of water would be if it followed the trend, and comment on what this means for life on Earth.
Boiling points of the group 16 hydrides, in kelvin. The dashed line extends the trend of the heavier hydrides back to period 2.
Step 1: Identify the forces in , and
Each is bent with polar bonds, so it has dipole–dipole attractions as well as dispersion forces. S, Se and Te are not N, O or F, so none of them forms hydrogen bonds.
Step 2: Explain the trend (a)
Down the group the molecules have more electrons (18, 36, 54), so their electron clouds are more easily distorted and dispersion forces get stronger. The bonds do not become more polar (S–H and Se–H differ by , Te–H by only ), so the rise is due to dispersion forces. More energy is needed to separate the molecules, so boiling points rise from −60 °C to −2 °C.
The trend continues even though the dipoles weaken, which shows dispersion forces dominate for these molecules.
Step 3: Explain water (b)
In water, H is bonded to O, which is small and highly electronegative (3.4). Each molecule can form hydrogen bonds to its neighbours through its two H atoms and two lone pairs. These are much stronger than the dipole–dipole and dispersion forces in the other hydrides, so far more energy is needed to separate water molecules.
Step 4: Extrapolate the trend (c)
Extending the trend of the heavier hydrides back to period 2 (the dashed line continues the slope from to ) gives roughly 190–195 K, about −80 °C. A straight line of best fit through all three heavier hydrides is steeper and gives about 180 K, so anything from about −100 °C to −70 °C is a sensible estimate.
Step 5: Comment
Without hydrogen bonding, water would be a gas at every temperature found on Earth's surface. There would be no liquid oceans, rivers or water inside cells, so life as we know it could not exist.
Try it yourself first, then check the working one step at a time.
Answer
(a) Down the group the number of electrons increases, so dispersion forces get stronger and boiling points rise. (b) Water molecules form hydrogen bonds with each other (H bonded to O), which are much stronger than the forces between the other hydrides' molecules. (c) About −80 °C (−100 °C to −70 °C); water would be a gas at Earth's surface temperatures and there would be no liquid water for life.
Method
Explain a trend down a group with the number of electrons and dispersion forces.
Explain an exception by identifying a different, stronger force.
Extrapolate a trend line carefully and state the estimate as approximate.
Watch out for
Explaining the rise down the group with "stronger dipoles". The bonds actually become less polar.
Saying water's O–H bonds are stronger. Boiling does not break them.
When the molecules being compared have similar numbers of electrons, the type of force decides. Propane, methoxymethane and ethanol each have 26 electrons and molar masses of 44–46 g mol⁻¹, so their dispersion forces are similar, yet their boiling points span 120 °C.
Worked example
Ranking propane, methoxymethane and ethanol by boiling point
Propane (, ), methoxymethane (, ) and ethanol (, ) have similar molar masses. Their boiling points are −42 °C, −25 °C and 78 °C, but not in that order. Match each substance to its boiling point and explain your answer in terms of intermolecular forces.
Step 1: Compare the dispersion forces
All three have 26 electrons and similar sizes, so their dispersion forces are similar. Any big difference in boiling point must come from the other forces.
When the number of electrons is about the same, the type of force decides.
Step 2: Propane
Propane is a hydrocarbon and is non-polar, so it has dispersion forces only, the weakest set of forces of the three.
Step 3: Methoxymethane
The C–O bonds are polar () and the C–O–C unit is bent, so the molecule is polar: dispersion forces plus dipole–dipole attractions. Its H atoms are all on carbon, so it cannot hydrogen bond to itself.
Step 4: Ethanol
Ethanol has an O–H group, so its molecules form hydrogen bonds with one another, in addition to dipole–dipole and dispersion forces. These are the strongest attractions of the three.
Step 5: Match and link
The stronger the intermolecular forces, the more energy is needed to separate the molecules into a gas, so the higher the boiling point: propane −42 °C < methoxymethane −25 °C < ethanol 78 °C.
Try it yourself first, then check the working one step at a time.
Answer
Propane −42 °C (dispersion only), methoxymethane −25 °C (dipole–dipole attractions as well), ethanol 78 °C (hydrogen bonding between molecules).
Method
Check whether the molecules have similar numbers of electrons.
Identify the strongest force in each substance.
Link stronger forces to more energy needed to separate the molecules.
Watch out for
Saying methoxymethane hydrogen bonds because it contains oxygen. The O must carry an H for the molecules to hydrogen bond with each other.
Explaining boiling with "breaking bonds" without saying the bonds broken are intermolecular.
Phosphine, (34.0 g mol⁻¹), boils at −88 °C. Ammonia, (17.0 g mol⁻¹), boils at −33 °C. Which statement explains why ammonia has the higher boiling point?
Shape matters too. Pentane and 2,2-dimethylpropane are both , with the same number of electrons. Pentane is a long chain whose molecules lie alongside each other with a large contact area; 2,2-dimethylpropane is compact and nearly spherical, so its molecules touch only at a few points. Pentane boils at 36 °C and 2,2-dimethylpropane at 10 °C.
Same formula, , different shapes: pentane (bp 36 °C) has more contact area between molecules than compact 2,2-dimethylpropane (bp 10 °C).
Vapour pressure. In a closed container, some molecules escape from the surface of a liquid and some return, until the vapour above it reaches a steady pressure: the vapour pressure. Weaker intermolecular forces let more molecules escape, so the vapour pressure is higher. A liquid boils when its vapour pressure equals the pressure above it, so a liquid with a high vapour pressure has a low boiling point.
| Liquid | Strongest intermolecular force | Vapour pressure at 20 °C (kPa) | Boiling point (°C) |
|---|---|---|---|
| Ethoxyethane, | dipole–dipole (weak) | 59 | 35 |
| Propanone, | dipole–dipole | 25 | 56 |
| Ethanol, | hydrogen bonding | 5.9 | 78 |
| Water, | hydrogen bonding (up to four per molecule) | 2.3 | 100 |
Which of these liquids has the highest vapour pressure at 25 °C?
Solubility. A substance dissolves when the attractions between solute and solvent particles are similar in strength to the attractions they replace (solute–solute and solvent–solvent). Hence the rule like dissolves like:
- Polar and hydrogen-bonding solutes dissolve in polar solvents such as water. Ethanol and water mix in all proportions because ethanol molecules hydrogen bond with water molecules.
- Non-polar solutes dissolve in non-polar solvents. Iodine dissolves readily in hexane (a purple solution) but only slightly in water; hexane and water barely mix, forming two layers, because hexane molecules cannot form hydrogen bonds to replace the ones they would break between water molecules.
As the hydrocarbon chain of an alcohol grows, the non-polar part takes over. Methanol, ethanol and propan-1-ol mix with water in all proportions; about 7 g of butan-1-ol dissolves in 100 g of water, about 2 g of pentan-1-ol and only about 0.6 g of hexan-1-ol.
Iodine, , dissolves much better in hexane than in water. Which explanation is correct?
Common mistake
Comparing only the type of force
"Hydrogen bonding is always stronger than dispersion" is true only for molecules of similar size. Iodine (dispersion forces only, 254 g mol⁻¹) is a solid that melts at 114 °C, while water is a liquid. Octane (dispersion only) boils at 126 °C, above water. When molecules differ a lot in size, discuss both the type of force and the number of electrons.
Exam tip
Explaining a difference in boiling points
A full answer: (1) identify the strongest intermolecular force in each substance, with the reason (polar? H on N, O or F?); (2) compare their strengths, mentioning number of electrons if relevant; (3) link: stronger forces need more energy to separate the molecules, so a higher boiling point.
Summary
Stronger intermolecular forces give higher melting and boiling points and lower vapour pressures.
Within a group, boiling points rise with the number of electrons (stronger dispersion forces).
, and boil far higher than their trends predict because of hydrogen bonding.
For similar numbers of electrons: hydrogen bonding > dipole–dipole > dispersion only. Long, straight molecules have stronger dispersion forces than compact ones.
A liquid boils when its vapour pressure equals the external pressure.
Like dissolves like: polar and hydrogen-bonding substances dissolve in water; non-polar substances in non-polar solvents.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.