Lesson 8 of 10 · 20 min
Pressure, volume and temperature
Explain and use the relationships between the pressure, volume and kelvin temperature of a fixed amount of gas, analyse P–V–T data from experiments, and apply them to safe scuba diving.
What you will be able to do
- State and explain, with the kinetic theory, how pressure depends on volume (Boyle's law) and on kelvin temperature, and how volume depends on kelvin temperature.
- Calculate a new pressure, volume or temperature for a fixed amount of gas.
- Analyse P–V and V–T data to find the relationship, including linearising with and extrapolating to absolute zero.
- Explain why safe scuba diving depends on the behaviour of gases.
A scuba diver 20 m down takes a full breath from the tank and, against every rule of their training, holds it while swimming to the surface. By the time they arrive, the air in their lungs is trying to occupy three times the space. Why three, and why it matters, comes from the simplest of the gas relationships.
For a fixed amount of gas, three quantities can change: pressure , volume and temperature . Hold one of them constant and the other two are related simply, as long as is in kelvin.
The gas starts at 20 L and 100 kPa. Push the piston and watch both graphs: against is a curve; against is a straight line through the origin.
Key idea
Boyle's law (constant amount and temperature)
Pressure is inversely proportional to volume: , so is constant and
Kinetic explanation: in a smaller volume the same particles, moving at the same average speed, hit each square metre of wall more often, so the pressure is higher.
Worked example
A diver who holds their breath
At a depth of 20 m in the sea the total pressure is 300 kPa. A diver there fills their lungs with 6.0 L of air from their regulator and then, against their training, holds their breath while rising to the surface, where the pressure is 100 kPa.
(a) Calculate the volume the air in their lungs would occupy at the surface, assuming its temperature does not change.
(b) The water is 16 °C at 20 m and 24 °C at the surface. Determine whether including this temperature change makes the situation better or worse.
(c) Explain why divers are trained to breathe out continuously while ascending.
Step 1: Identify the relationship (a)
The amount of air is fixed and the temperature is assumed constant, so Boyle's law applies: .
Step 2: Calculate the volume at the surface
Step 3: Include the temperature change (b)
, . With :
Warming makes a gas expand at constant pressure, so the warmer water at the surface makes the expansion slightly worse.
Step 4: Interpret (c)
Lungs hold about 6 L at most, so air trying to occupy three times that volume would over-expand and tear the lung tissue (lung over-expansion injury) long before the diver reached the surface. Breathing out steadily lets the expanding air escape, keeping the lung volume safe. Most of the expansion happens near the surface: going from 20 m to 10 m only takes the pressure from 300 to 200 kPa, but going from 10 m to the surface halves it.
Try it yourself first, then check the working one step at a time.
Answer
(a) 18 L. (b) Worse, but only slightly: about 18.5 L. (c) The air expands as the pressure falls (Boyle's law) and would over-expand the lungs; breathing out lets the extra volume escape.
Method
Fixed amount and constant temperature: .
Include temperature with , in kelvin.
Link the numbers to the physical consequence.
Watch out for
Using gauge pressure (200 kPa from the water alone) instead of the total pressure (300 kPa).
Using °C in part (b): would claim the temperature effect is 50 %.
Key idea
Charles's and Gay-Lussac's laws
Charles's law (constant amount and pressure): volume is directly proportional to kelvin temperature, , so . Heated particles move faster and hit the piston harder and more often, pushing it out until the pressure falls back to its original value.
Gay-Lussac's law (constant amount and volume): pressure is directly proportional to kelvin temperature, , so . In a rigid container, faster particles hit the walls more often and harder.
Combined, for a fixed amount of gas: . None of these is in the data book; all of them follow from with fixed.
Volume of 1.00 mol of gas at 100 kPa against temperature in °C. The line extrapolates to zero volume at −273 °C, absolute zero. In kelvin the same line passes through the origin: .
A balloon holds 2.50 L of air at 27 °C. It is placed in a freezer at −18 °C. Assuming the pressure stays constant, what is its new volume, in L to three significant figures?
Analysing P–V–T data. In the Boyle's law investigation, a gas syringe is connected to a pressure sensor and the plunger is pushed in step by step, waiting each time for the temperature to settle. To show that :
- calculate for each reading: it should be constant within experimental uncertainty;
- or plot against : it should be a straight line through the origin, with gradient .
A straight line is easier to judge than a curve, which is why we linearise the data. For temperature data, plot (or ) against temperature; a straight line that extrapolates to zero at about −273 °C shows that in kelvin.
Worked example
Analysing data from a Boyle's law experiment
A student traps air in a gas syringe connected to a pressure sensor at a room temperature of 20 °C, then pushes the plunger in, waiting after each step. Their results:
| Volume (mL) | 60.0 | 50.0 | 40.0 | 30.0 | 20.0 |
|---|---|---|---|---|---|
| Pressure (kPa) | 101 | 121 | 150 | 202 | 298 |
(a) Show that the data support Boyle's law.
(b) Describe the graph you would draw to show the relationship as a straight line, and state its gradient.
(c) Calculate the amount of air, in mol, in the syringe.
(d) Explain why the student waited after each step before reading the pressure.
against for the student's data, with the line of best fit through the origin.
Step 1: Calculate for each reading (a)
. The mean is and every value is within about 1 % of it.
Boyle's law says is constant for a fixed amount of gas at constant temperature. The small spread is consistent with measurement uncertainty.
Step 2: Linearise (b)
Plot (kPa) against (mL⁻¹). Since , the points lie on a straight line through the origin with gradient .
Step 3: Find the amount of air (c)
, and , so
R = 8.31 needs kPa with L, so convert kPa mL to kPa L by dividing by 1000.
Step 4: Explain the waiting (d)
Pushing the plunger in quickly does work on the gas and warms it slightly. Waiting lets the air return to room temperature, so the temperature really is constant, as Boyle's law requires.
Try it yourself first, then check the working one step at a time.
Answer
(a) is constant at about (within 1 %). (b) against : a straight line through the origin with gradient about . (c) mol. (d) To keep the temperature constant.
Method
Test an inverse relationship by multiplying: a constant product supports it.
Linearise: plot against ; the gradient is .
Use with kPa and L to find .
Watch out for
Plotting P against V and calling the curve "a straight line relationship".
Using kPa mL directly in , which gives an answer 1000 times too big.
For a fixed amount of gas at constant temperature, which graph is a straight line through the origin?
Scuba diving and the gas laws. Seawater adds about 100 kPa of pressure for every 10 m of depth, on top of the 100 kPa of the atmosphere. Divers must understand what that does to the air they breathe:
- Never hold your breath while ascending. As the surrounding pressure falls, air in the lungs expands (Boyle's law) and can tear the lung tissue. Divers breathe out steadily as they rise.
- Air runs out faster at depth. The regulator supplies air at the surrounding pressure, so each breath at 30 m (400 kPa) contains four times as many particles as a breath at the surface, and a tank lasts about a quarter as long.
- Ears and masks need equalising on the way down, as the air spaces in them are compressed.
- Ascend slowly. Gases dissolve in the blood under pressure and come out of solution as bubbles if the pressure drops too quickly, causing decompression sickness ("the bends").
History
Cousteau, Gagnan and the Aqua-Lung
Before the 1940s, divers mostly breathed air pumped down a hose from the surface, or used early self-contained sets that let air flow continuously and wasted it. In 1942–43, in occupied France, naval officer Jacques-Yves Cousteau worked with Émile Gagnan, an engineer at the gas company Air Liquide. Gagnan had designed a valve to feed cooking gas to car engines during wartime fuel shortages; together they adapted it into a demand regulator that delivers air from a high-pressure tank only when the diver breathes in, and always at the pressure of the surrounding water. They tested and patented the Aqua-Lung in 1943, and after the war it made self-contained underwater breathing apparatus (SCUBA) diving possible for scientists, the navy and, later, millions of recreational divers.
A diver's tank lasts 60 minutes when breathing at the surface (100 kPa). Assuming the same breathing rate and temperature, about how long will it last at 30 m, where the pressure is 400 kPa?
Common mistake
Temperatures in degrees Celsius
Warming a gas from 10 °C to 20 °C does not double its volume. Proportionality only holds in kelvin: 283 K to 293 K, an increase of about 3.5 %. Convert every temperature with before you substitute.
Summary
Boyle's law: at constant and , and .
Charles's law: at constant and , (kelvin). Gay-Lussac's law: at constant and , (kelvin).
For a fixed amount of gas, ; all follow from .
Linearise data: against is a straight line through the origin; against extrapolates to zero at −273 °C.
Each 10 m of seawater adds about 100 kPa. Divers breathe out while ascending, use more air at depth and ascend slowly.
Cousteau and Gagnan's demand regulator (the Aqua-Lung, 1943) supplies air at the surrounding pressure, making scuba diving practical.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.