Lesson 7 of 10 · 13 min
The kinetic theory of gases
Use the kinetic theory to explain gas pressure and how it changes with volume, temperature and amount of gas, and identify when real gases behave like ideal gases.
What you will be able to do
- State the assumptions of the kinetic theory of gases.
- Explain gas pressure, and changes in pressure, in terms of particle collisions with the container walls.
- Relate the average kinetic energy of gas particles to the kelvin temperature.
- Identify that the kinetic theory describes an ideal gas, and the conditions under which real gases depart from it.
Pump up a bike tyre and it gets firm. Leave the bike in the sun and the tyre gets firmer still, though you added no air. Squeeze a sealed syringe of air and it pushes back harder. Gases behave so predictably that one simple model explains all of this: the kinetic theory of gases.
Key idea
The kinetic theory of gases
- A gas is made of a very large number of particles (atoms or molecules) in constant, random, straight-line motion.
- The particles are so far apart that their own volume is negligible compared with the volume of the container.
- There are no forces of attraction or repulsion between particles, except when they collide.
- Collisions between particles and with the walls are elastic: no kinetic energy is lost overall.
- The average kinetic energy of the particles is directly proportional to the absolute (kelvin) temperature.
Press play. Then heat the gas, add more gas and push the piston in, one at a time, and watch the collision counter and the pressure.
Where pressure comes from. Each time a particle hits a wall it bounces off and pushes on the wall. Billions of collisions every second add up to a steady force on each square metre of wall: the gas pressure. Anything that makes collisions with the walls more frequent or more forceful raises the pressure.
| Change | What happens to the particles | Effect on pressure |
|---|---|---|
| Add more gas (V and T fixed) | More particles in the same space, so more collisions with each square metre of wall per second | increases |
| Decrease the volume (n and T fixed) | The same particles have less space; each part of the wall is hit more often | increases |
| Raise the temperature (n and V fixed) | Particles move faster, so they hit the walls more often and harder | increases |
| Raise the temperature (n and P fixed, piston free) | Faster particles hit the piston harder and push it out. In the larger volume each square metre is hit less often, until the pressure is back to its original value | stays the same; volume increases |
A sealed, rigid aerosol can is heated. Which statement explains why the pressure inside it rises?
Worked example
Tyre pressure on a hot day
The air in a car tyre has an absolute pressure of 320 kPa at 18 °C. After a long drive on a hot road, the air in the tyre is at 55 °C.
(a) Use the kinetic theory to explain why the pressure in the tyre increases.
(b) Calculate the new pressure, assuming the volume of the tyre does not change.
Step 1: Explain with particles (a)
Heating raises the average kinetic energy of the air particles, so they move faster. With the same number of particles in the same volume, they hit the inside of the tyre more often and with more force, so the pressure increases.
Step 2: Convert the temperatures to kelvin
,
Pressure is proportional to the kelvin temperature, not the Celsius temperature.
Step 3: Use pressure ∝ temperature at constant volume
Try it yourself first, then check the working one step at a time.
Answer
(a) Faster particles collide with the walls more often and harder. (b) About 361 kPa.
Method
Explain pressure with the frequency and force of wall collisions.
Convert to kelvin, then .
Watch out for
Using °C: gives 978 kPa, which is far too large.
Saying the particles expand.
Temperature and kinetic energy. The fifth assumption links the model to temperature: average kinetic energy is proportional to the temperature in kelvin. Double the kelvin temperature (300 K to 600 K) and you double the average kinetic energy; going from 10 °C to 20 °C raises it by only about 3.5 % (283 K to 293 K). At the same temperature, all gases have the same average kinetic energy, so lighter particles move faster: hydrogen molecules at room temperature average about four times the speed of oxygen molecules.
Definition
Ideal gas
An ideal gas is one that behaves exactly as the kinetic theory describes, and so obeys under all conditions. No real gas is perfectly ideal, but most gases come very close at ordinary temperatures and pressures.
Real gases depart from ideal behaviour when the assumptions break down:
- At high pressure, the particles are squeezed close together, so their own volume is no longer negligible, and the attractions between them start to matter.
- At low temperature, the particles move slowly, so attractions between them pull them together; near its boiling point a gas starts to condense into a liquid, which the kinetic theory cannot explain.
So gases behave most ideally at low pressure and high temperature, and small, non-polar particles with weak dispersion forces (helium, hydrogen) are the most ideal of all.
Under which conditions would a sample of ammonia gas behave most like an ideal gas?
Note
Why gas laws matter underwater
Water is heavy. For every 10 m a scuba diver descends in the sea, the pressure on them rises by about 100 kPa, so at 10 m it is about 200 kPa (twice the surface pressure) and at 30 m about 400 kPa. The air the diver breathes must be delivered at that pressure, so it is compressed: the same lungful contains more particles. You will put numbers on this in the next lesson.
Common mistake
Particles do not grow
Heating a gas makes its particles move faster, not get bigger, and cooling it does not make them shrink. A gas expands when heated (at constant pressure) because faster particles push the walls or piston outwards, increasing the space between particles.
Summary
Kinetic theory: particles in constant random motion, negligible volume, no forces except elastic collisions, average kinetic energy proportional to the kelvin temperature.
Pressure is caused by particles colliding with the walls; more frequent or more forceful collisions mean higher pressure.
More gas, smaller volume or higher temperature each increase the pressure (with the other two fixed).
The kinetic theory describes an ideal gas. Real gases behave most ideally at low pressure and high temperature.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.