Lesson 9 of 10 · 18 min
Molar volume and the ideal gas equation
Use with consistent units to find the pressure, volume, amount, mass or temperature of a gas, and use the molar volume of 22.7 L mol⁻¹ at STP.
What you will be able to do
- Solve for any variable, with in kelvin and and in kPa and L (or Pa and m³).
- Combine with to find the mass of a gas or its molar mass.
- State that one mole of any ideal gas occupies 22.7 L at STP (273 K, 100 kPa), and convert between moles, volume at STP and mass.
Boyle's, Charles's and Gay-Lussac's laws each describe a fixed amount of gas with one quantity held constant. Add the amount of gas, (more particles, more collisions), and all of them combine into one equation, true for any ideal gas.
Key idea
Units that work with R = 8.31
. Since (and ), use either set:
| Quantity | Chemistry set | SI set |
|---|---|---|
| kPa | Pa | |
| L (= dm³) | m³ | |
| mol | mol | |
| K | K |
Convert first: ; ; .
Set three of , , and and the widget solves for the fourth, showing the substitution. Change which one it solves for, and check each answer by hand.
Worked example
Mass of oxygen in a cylinder
A 5.00 L cylinder contains oxygen gas at 2000 kPa and 20 °C. Calculate the mass of oxygen in the cylinder.
Step 1: Convert to the right units
, ,
kPa and L can be used directly with , because kPa × L = J.
Step 2: Find the moles
Step 3: Find the mass
, so
Try it yourself first, then check the working one step at a time.
Answer
About 131 g of oxygen.
Method
Convert: T in K, P in kPa, V in L.
, then .
Watch out for
Using for oxygen gas. Oxygen is diatomic, .
Using 20 instead of 293 K.
A 500 mL flask contains nitrogen at 120 kPa and 25 °C. How many moles of nitrogen does it contain? Give your answer to three significant figures.
Molar volume. Rearrange the equation for the volume of one mole: . Nothing on the right depends on which gas it is. So at the same temperature and pressure, one mole of any ideal gas occupies the same volume (equal volumes of gases contain equal numbers of particles, as Amedeo Avogadro proposed in 1811).
At standard temperature and pressure (STP), which the QCAA data book defines as 273 K and 100 kPa:
Key idea
Gas volume, moles and molar volume at STP
With you can go from mass to volume and back: .
Change the gas: one mole always fills 22.7 L at 273 K and 100 kPa. Then warm it to 298 K, or double the pressure, and see why 22.7 L only applies at STP.
Worked example
Converting between mass and volume of carbon dioxide at STP
(a) What volume does 8.80 g of carbon dioxide occupy at STP?
(b) What mass of carbon dioxide occupies 10.0 L at STP?
Step 1: Molar mass of
Step 2: Mass to moles to volume (a)
, so
Step 3: Volume to moles to mass (b)
, so
Try it yourself first, then check the working one step at a time.
Answer
(a) 4.54 L. (b) 19.4 g.
Method
mass → moles → volume at STP.
volume at STP → moles → mass.
Watch out for
Dividing by 22.7 when you should multiply (or the reverse). Check the size: 0.2 mol of gas is a few litres.
Using 22.7 L mol⁻¹ at room temperature. It applies only at 273 K and 100 kPa.
What volume does 0.250 mol of methane occupy at STP? Give your answer in L to three significant figures.
A balloon holds 3.00 L of helium at STP. What mass of helium is in the balloon? (.) Give your answer in g to three significant figures.
Measuring the molar volume. One practical way: weigh a disposable butane lighter, release the gas under an inverted measuring cylinder full of water until it holds about 100 mL, then weigh the lighter again. The mass lost and give the moles; the volume, pressure and temperature are measured; and the volume is converted to STP with before dividing by the moles. Sources of error include water vapour mixed with the collected gas, water clinging to the lighter when it is weighed, and some butane dissolving in the water.
Common mistake
Three ways to lose the mark
- Degrees Celsius. must be in kelvin; at 0 °C a Celsius value would divide by zero.
- Mismatched units. kPa with L, or Pa with m³. kPa with m³ makes the answer 1000 times too small; Pa with L, 1000 times too big. 250 mL is 0.250 L.
- 22.7 L away from STP. The molar volume 22.7 L mol⁻¹ is only for 273 K and 100 kPa. At 25 °C and 100 kPa, one mole fills 24.8 L. Anywhere other than STP, use .
Exam tip
Set it out
Write the rearranged equation, list the converted values with units, substitute, and give the answer with a unit to the significant figures of the data (usually three). If the question gives a mass, find moles with using the data book's relative atomic masses.
Summary
with : in kPa with in L, or Pa with m³; always in kelvin.
Combine with to find masses or molar masses.
At the same temperature and pressure, equal volumes of gases contain equal numbers of moles.
At STP (273 K, 100 kPa), one mole of any ideal gas occupies 22.7 L: .
Use 22.7 L mol⁻¹ only at STP; otherwise use .
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.