Lesson 11 of 12 · 15 min
Acid rain
Trace sulfur dioxide from coal- and oil-fired power stations to acid rain, write the equations that form sulfuric and nitric acids, and explain the damage and how it is reduced.
What you will be able to do
- Explain why unpolluted rain is slightly acidic.
- Identify burning coal and oil in power stations as the main source of atmospheric sulfur dioxide.
- Write equations for the formation of sulfuric and nitric acids in the atmosphere.
- Explain the effects of acid rain on buildings, metals, lakes and forests with equations.
- Describe ways of reducing acid rain.
In the 1970s and 1980s, lakes in Scandinavia and north-eastern North America lost their fish, forests were stripped of needles, and centuries-old limestone carvings in European cities began to dissolve. The cause was rain tens to hundreds of times more acidic than normal, carrying acids made from the gases of power-station chimneys hundreds of kilometres away.
Key idea
Normal rain is already slightly acidic
Carbon dioxide in the air dissolves in rainwater and forms the weak acid carbonic acid:
Unpolluted rain therefore has a pH of about 5.6. Acid rain is rain with a pH below about 5.6, made more acidic by dissolved sulfur and nitrogen oxides. Polluted rain has measured pH values of 4 and lower.
How acid rain forms.
Where the sulfur dioxide comes from
Coal and oil contain sulfur compounds left from the organisms they formed from, typically 0.5 % to 3 % sulfur by mass. When the fuel burns, the sulfur burns too:
Most of the sulfur dioxide released to the atmosphere comes from burning coal or oil in electric power stations, because they burn fuel in enormous quantities. Metal smelters (which roast sulfide ores) and volcanoes are the other big sources. In Australia, coal-fired power stations and smelters are the largest emitters.
From gases to acids
Sulfur dioxide dissolves in cloud water to form sulfurous acid, or is first oxidised to sulfur trioxide, which forms sulfuric acid, a strong acid:
Nitrogen oxides form when nitrogen and oxygen from the air react in the heat of engines and furnaces, and end up as nitric acid:
Write the balanced equation, with states, for sulfur trioxide gas dissolving in rainwater to form sulfuric acid.
Rain collected downwind of a smelter has a pH of 4.2. How many times greater is its hydrogen ion concentration than that of unpolluted rain at pH 5.6? Give your answer to two significant figures.
The damage
- Limestone and marble (calcium carbonate) dissolve, so statues and buildings lose detail: . With sulfuric acid, a crust of calcium sulfate forms and flakes away.
- Metals such as iron in bridges and railings corrode faster: .
- Lakes and rivers become acidic. Below about pH 5 most fish cannot breed, and the acid leaches aluminium ions from soils into the water, which damage fish gills.
- Forests and soils lose nutrient cations such as and , which are washed out of the soil, and leaves are damaged directly.
Worked example
How fast does acid rain dissolve a marble statue?
A marble statue (calcium carbonate) in an industrial city receives about 800 L of rain a year, at an average pH of 4.00.
(a) Write equations, with states, showing how sulfur in coal becomes sulfuric acid in rain.
(b) Write the ionic equation for the reaction of acid rain with marble.
(c) Estimate the mass of marble dissolved each year, assuming all the hydrogen ions react with the statue. Comment on the assumption.
Step 1: From sulfur to sulfuric acid
, then , then .
Step 2: Acid rain on marble
Step 3: Moles of hydrogen ions each year
, so .
Step 4: Moles and mass of calcium carbonate
The ratio is 1 : 2 , so . With , .
Step 5: Comment on the assumption
Much of the rain runs off before it reacts, so the real loss is probably smaller. On the other hand, dry deposition of onto the stone and its weakly acidic content add to the damage. Over a century, even 4 g a year erases fine carved detail.
Try it yourself first, then check the working one step at a time.
Answer
(a) ; ; (b) (c) about 4.0 g a year. Much of the rain runs off before it reacts, so the rain alone probably dissolves less, although dry deposition of sulfur dioxide adds damage the estimate leaves out.
Method
Convert pH to , then to moles with .
Use the mole ratio from the balanced equation.
Convert to mass and evaluate the assumptions.
Watch out for
Using a 1 : 1 ratio of to , which doubles the answer.
Using from the pH directly.
Reducing acid rain
- Flue-gas desulfurisation: power-station exhaust is sprayed with a slurry of limestone, which reacts with the sulfur dioxide before it leaves the chimney: . The product is oxidised to calcium sulfate (gypsum), used to make plasterboard.
- Low-sulfur fuels, or removing sulfur from oil before it is sold.
- Renewable energy (solar, wind, hydro), which burns no fuel at all.
- Catalytic converters in cars, which turn nitrogen oxides back into nitrogen.
- Liming acidified lakes and soils with calcium carbonate to neutralise the acid.
Which human activity releases most of the sulfur dioxide that enters the atmosphere?
Common mistake
Carbon dioxide does not cause acid rain
Carbon dioxide makes all rain slightly acidic (pH about 5.6), but acid rain, below 5.6, is caused by sulfur and nitrogen oxides, which form the strong acids and . Carbon dioxide is linked to climate change and ocean acidification, a different problem.
Exam tip
Equations in context
An acid rain question often asks you to apply equations from earlier lessons: the formation of the acids, an acid–carbonate reaction for limestone, an acid–metal reaction for corrosion, and a pH comparison. Give each with states and say which part of the problem it explains.
Summary
Unpolluted rain is about pH 5.6 because of dissolved carbon dioxide; acid rain is below that.
Most atmospheric sulfur dioxide comes from burning coal or oil in electric power stations.
Sulfur dioxide forms , or is oxidised to , which forms ; nitrogen oxides form .
Acid rain dissolves limestone and marble, corrodes metals, acidifies lakes and leaches nutrients from soils.
Scrubbers, low-sulfur fuels, renewables and catalytic converters reduce it; liming treats the damage.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.