Lesson 1 of 12 · 15 min
Why water is so unusual
Explain water's high boiling point, high heat capacity, surface tension, solvent power and floating ice from its bent shape and the hydrogen bonds between its molecules.
What you will be able to do
- Describe the shape and polarity of a water molecule.
- Explain how hydrogen bonds form between water molecules.
- Link water's high melting and boiling points, high specific heat capacity, surface tension and the low density of ice to hydrogen bonding.
- Compare water with the hydrides of the other group 16 elements.
Water is a tiny molecule. Its molar mass is only , less than that of oxygen or nitrogen gas. Molecules that small are usually gases at room temperature, yet water is a liquid that boils at 100 °C, and its solid floats on its liquid.
Every one of those oddities comes from two facts you met in Unit 2 Topic 1: water is bent, and its molecules hydrogen bond to each other.
Water has four electron pairs around oxygen: two bonding pairs and two lone pairs. The lone pairs push the bonds into a bent shape with an angle of 104.5°.
Key idea
Shape and polarity
- Oxygen (electronegativity 3.4) pulls the bonding electrons towards itself and away from hydrogen (2.2), so each O–H bond is polar: O is δ−, each H is δ+.
- The four electron pairs around oxygen give a tetrahedral arrangement, and with two lone pairs the molecule is bent (104.5°).
- Because it is bent, the two bond dipoles do not cancel. Water is a polar molecule, with a δ− oxygen end and a δ+ hydrogen end.
A δ+ hydrogen on one molecule is strongly attracted to a lone pair on the oxygen of a neighbour. That attraction is a hydrogen bond. It is far weaker than the covalent O–H bond inside the molecule, but it is the strongest kind of intermolecular force.
Each water molecule has two hydrogens and two lone pairs, so it can take part in up to four hydrogen bonds at once. In ice, every molecule does; in liquid water, the bonds constantly break and re-form.
Hydrogen bonds (dashed blue lines) form between a δ+ hydrogen on one molecule and a lone pair on the oxygen of another. The solid lines are the covalent O–H bonds inside each molecule.
Compare water with hydrogen sulfide and hydrogen selenide. The heavier molecules have stronger dispersion forces, yet water boils far higher. Which force between neighbours makes the difference?
| Hydride | Molar mass () | Boiling point (°C) | Intermolecular forces |
|---|---|---|---|
| 18.02 | 100 | hydrogen bonding, plus weak dispersion forces | |
| 34.08 | −60 | dispersion and weak dipole–dipole | |
| 80.99 | −41 | dispersion and weak dipole–dipole | |
| 129.62 | −2 | dispersion (the Te–H bond is almost non-polar) |
Worked example
Why water boils so much higher than hydrogen sulfide
Water, (), boils at 100 °C. Hydrogen sulfide, (), has the same bent shape but boils at −60 °C. Explain the difference in terms of the intermolecular forces in each substance.
Step 1: Say what boiling involves
Boiling separates molecules from each other. The higher the boiling point, the stronger the intermolecular forces that must be overcome. The covalent bonds within the molecules do not break.
Step 2: Compare the dispersion forces
has more electrons than , so its dispersion forces are slightly stronger. On dispersion forces alone, should boil higher.
Dispersion forces grow with the number of electrons. This rules them out as the reason water boils higher.
Step 3: Identify hydrogen bonding in water
Oxygen (electronegativity 3.4) is much more electronegative than hydrogen (2.2), and it is small with two lone pairs. Each δ+ hydrogen on one water molecule is strongly attracted to a lone pair on the oxygen of a neighbour: a hydrogen bond. Each molecule can form up to four.
Step 4: Explain why hydrogen sulfide cannot hydrogen bond
Sulfur (2.6) is only slightly more electronegative than hydrogen (2.2), and it is larger, so the S–H bond is only weakly polar. has weak dipole–dipole attractions and dispersion forces, but no hydrogen bonds.
Hydrogen bonding needs H bonded directly to N, O or F.
Step 5: Conclude
Hydrogen bonds are much stronger than the dipole–dipole forces in , so far more energy is needed to separate water molecules. Water therefore boils about 160 °C higher.
Try it yourself first, then check the working one step at a time.
Answer
Water molecules are held together by hydrogen bonds (a δ+ H on one molecule attracted to a lone pair on the very electronegative O of another, up to four per molecule). Hydrogen sulfide has only weak dipole–dipole and dispersion forces because S is not electronegative enough to form hydrogen bonds. Much more energy is needed to overcome water's hydrogen bonds, so water boils at a much higher temperature despite its smaller molar mass.
Method
Boiling overcomes intermolecular forces, not covalent bonds.
Identify the strongest intermolecular force in each substance.
Compare their strengths and link to the energy needed.
Watch out for
Saying the O–H bonds are stronger than S–H bonds, so water is harder to boil. Boiling does not break covalent bonds.
Forgetting to explain why does not hydrogen bond.
What is the greatest number of hydrogen bonds one water molecule can form with its neighbours?
| Property | What you notice | Explanation |
|---|---|---|
| High melting and boiling points | Water is a liquid at room temperature; is a gas | Many hydrogen bonds must be overcome to separate the molecules |
| High specific heat capacity () | Oceans and lakes warm and cool slowly; water is a good coolant | Energy goes into breaking hydrogen bonds as well as making the molecules move faster |
| High latent heat of vaporisation | Sweating cools you strongly | Each molecule that evaporates must break all its hydrogen bonds |
| High surface tension | Insects walk on water; drops are round | Surface molecules are pulled inwards by hydrogen bonds with the molecules below |
| Ice is less dense than liquid water | Ice floats; lakes freeze from the top down | In ice the hydrogen bonds hold molecules in an open hexagonal lattice, further apart than in the liquid |
| Excellent solvent | Dissolves salts, sugars and many gases | Its polar molecules attract ions and form hydrogen bonds with polar solutes |
Note
Why floating ice matters
Most substances are densest as solids. Water is densest as a liquid at about 4 °C, and ice () is about 8 % less dense than the water it freezes from. When a lake freezes, the ice forms a floating, insulating layer, and the water underneath stays liquid near 4 °C, so fish survive the winter.
Which statement best explains why ice floats on liquid water?
Common mistake
Hydrogen bonds are between molecules
When water boils, the molecules separate but stay whole: the hydrogen bonds between molecules break, not the covalent O–H bonds within them. Steam is still . Writing "the O–H bonds break when water boils" loses the mark.
Select all the properties of water that are mainly due to hydrogen bonding between its molecules.
Exam tip
Explaining a property of water
A full-mark explanation has three links: shape and polarity (bent, polar O–H bonds, δ− oxygen with lone pairs, δ+ hydrogens), the force (hydrogen bonds between molecules, up to four per molecule), and the property (what the hydrogen bonds do: need energy to break, hold molecules apart in ice, pull surface molecules inwards).
Summary
Water is bent (104.5°) with polar O–H bonds, so it is a polar molecule.
A δ+ hydrogen on one molecule is attracted to a lone pair on a neighbour's oxygen: a hydrogen bond. Each molecule can form up to four.
Hydrogen bonds give water its high melting and boiling points, high specific heat capacity and latent heat, and high surface tension.
In ice, hydrogen bonds hold molecules in an open lattice, so ice is less dense than liquid water and floats.
Water's polarity makes it an excellent solvent for ionic and polar substances.
Boiling breaks the hydrogen bonds between molecules, never the covalent bonds within them.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.