Chemistry · Unit 2 · Topic 3

Rates of chemical reactions

Use collision theory, activation energy, Maxwell–Boltzmann distributions and energy profiles to explain what speeds reactions up, then calculate rates from concentration, volume and mass data and graphs.

  • 8 lessons
  • 2 h 22 min of lessons
  • 15 worked examples
  • 10 hours in the syllabus
0 of 8

Start here

What a reaction rate is and how to measure it

Lesson 1 of 8 · 16 min

Start the topic

Lessons

8
  1. What a reaction rate is and how to measure it (up next)

    Define the rate of a reaction, measure it by following a gas volume, a mass or a concentration, and calculate average rates as Δ[P]Δt\frac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\frac{-\Delta[\text{R}]}{\Delta t} with units.

  2. Collision theory and activation energy

    Explain reaction rates with collision theory: particles must collide with at least the activation energy EaE_a and the correct orientation, so only a tiny fraction of collisions succeed.

  3. Concentration, pressure, surface area, temperature and catalysts

    Use collision theory to explain how concentration, gas pressure, surface area, temperature and a catalyst change the rate of a reaction.

  4. Maxwell–Boltzmann distributions

    Sketch and interpret the spread of particle kinetic energies at one temperature, at a higher temperature and with a catalyst, and use the area beyond EaE_a to explain rates.

  5. Energy profile diagrams and activation energy

    Sketch energy profile diagrams for exothermic and endothermic reactions, read EaE_a and ΔH\Delta H from them, and link the bonds to be broken to the size of EaE_a.

  6. How catalysts and enzymes work

    Explain how a catalyst provides an alternative pathway with a lower EaE_a without changing ΔH\Delta H, compare homogeneous and heterogeneous catalysts, and explain how enzymes work.

  7. Average and instantaneous rates from graphs

    Read rates from concentration, volume and mass graphs: the average rate from a secant between two points, the instantaneous rate from a tangent, and how changed conditions change the curve.

  8. Investigating rates, from disappearing crosses to rusting iron

    Plan and analyse rate investigations with marble chips, magnesium and the disappearing cross, then apply rate ideas to corrosion and how we prevent it.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Some reactions are over in a flash, like a precipitate forming the instant two solutions meet. Others take years, like an iron gate rusting. In this topic you find out what decides how fast a reaction goes, and how to measure it.

The explanation rests on one model, collision theory: particles react only when they collide with enough energy, the activation energy EaE_a, and in the right orientation. You use it to explain how temperature, concentration, pressure, surface area and catalysts change the rate, and you draw the two diagrams that make the argument visual: Maxwell–Boltzmann distributions and energy profile diagrams. Then you put numbers on rates, rate=Δ[P]Δt\text{rate} = \dfrac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\dfrac{-\Delta[\text{R}]}{\Delta t}, and read average and instantaneous rates from experimental data and graphs, the way QCAA data questions ask.

Before you start

Builds on Chemical reactions — reactants, products and energy change.

  • Exothermic and endothermic reactions, enthalpy level diagrams and the sign of ΔH\Delta H (Unit 1, Topic 3).
  • The mole, n=mMn = \dfrac{m}{M}, and concentration c=nVc = \dfrac{n}{V} in mol L−1\text{mol L}^{-1}.
  • Balanced equations with state symbols, and reactions of acids with metals and carbonates.
  • Temperature as a measure of the average kinetic energy of particles.
  • Finding the gradient of a straight line from two points.

What QCAA says you need to know17 dot points

Rates of reactions

8 hours

Science as a human endeavour

1 hour

Science inquiry

1 hour

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Measuring and calculating rates

    Choose what to measure, then calculate a rate as $\frac{\Delta[\text{P}]}{\Delta t}$ or $\frac{-\Delta[\text{R}]}{\Delta t}$, or from gas volume or mass loss, with the right units.

    Practise
  • Collision theory

    State the three conditions for a successful collision and use them to explain and predict rates; know where the theory came from and where it falls short.

    Practise
  • Factors that change the rate

    Explain the effect of concentration, pressure, surface area, temperature and a catalyst on rate using collision frequency and the fraction of successful collisions.

    Practise
  • Activation energy and bonds

    Describe activation energy and link the strength and number of bonds to be broken to the size of $E_a$ and the rate.

    Practise
  • Maxwell–Boltzmann distributions

    Sketch and interpret distributions of particle kinetic energy at two temperatures and with a catalyst, shading the particles with at least $E_a$.

    Practise
  • Energy profile diagrams

    Sketch energy profiles with and without a catalyst and read $E_a$ and $\Delta H$ from them.

    Practise
  • Catalysts and enzymes

    Explain how a catalyst provides an alternative pathway with a lower activation energy, and how enzymes do it, including Mildred Cohn's work.

    Practise
  • Rates from graphs

    Read average rates between two points and instantaneous rates from tangents on concentration, volume and mass graphs, and compare curves for different conditions.

    Practise
  • Investigating rates

    Plan, analyse and evaluate rate experiments such as marble chips in acid, magnesium in acid and the disappearing cross.

    Practise
  • Corrosion and its prevention

    Explain what speeds up rusting and how coatings, galvanising and sacrificial metals slow it, and trace how ideas about corrosion developed.

    Practise

Worked examples15

All 15

Common mistakes

Saying a catalyst gives particles more energy

A catalyst does not change the energy of the particles or the shape of the Maxwell–Boltzmann curve. It provides a different pathway with a lower EaE_a, so a larger fraction of the particles already have enough energy.

Saying a catalyst changes ΔH

The reactants and products are the same, so their enthalpies are the same and ΔH\Delta H is unchanged. Only the height of the hump changes.

Saying temperature lowers the activation energy

Heating does not move the EaE_a line. It gives the particles more kinetic energy, so a greater fraction of them have at least EaE_a, and they collide more often.

Thinking every collision causes a reaction

Only a tiny fraction of collisions are successful. A successful collision needs energy at least equal to EaE_a and the correct orientation.

Drawing the higher-temperature peak taller

At a higher temperature the Maxwell–Boltzmann peak is lower and moves right, and the curve is broader. The number of particles is the same, so the area under both curves is the same.

A negative rate

A rate is positive. For a reactant, the concentration falls, so Δ[R]\Delta[\text{R}] is negative and the formula uses −Δ[R]-\Delta[\text{R}]. A graph sloping down still means a positive rate of using up that reactant.

Mixing up average and instantaneous rate

The average rate uses two points on the curve (a secant). The instantaneous rate at a time uses the tangent at that one point. They are only equal for a straight-line graph.

Changing the final amount of product when only the rate changes

Temperature, surface area and catalysts change how fast the curve rises, not where it levels off. Only changing the amount of the limiting reactant changes the final volume or mass.

Explaining concentration with energy

Increasing concentration, pressure or surface area increases the frequency of collisions. It does not give particles more energy. Only temperature changes the energy of the particles.

Forgetting units, or quoting only some

Every rate needs a unit that matches the quantity: mol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1}, mL s−1\text{mL s}^{-1}, g s−1\text{g s}^{-1} or g min−1\text{g min}^{-1}.

Exam tips

  1. The data book gives rate=Δ[P]Δt\text{rate} = \dfrac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\dfrac{-\Delta[\text{R}]}{\Delta t}, ΔH=Hproducts−Hreactants\Delta H = H_{\text{products}} - H_{\text{reactants}}, n=mMn = \dfrac{m}{M}, c=nVc = \dfrac{n}{V} and the molar volume at STP. Know how to use each with rates.

  2. Collision theory answers need a chain: the change → what happens to the particles → collision frequency and/or the fraction with E≥EaE \ge E_a → the frequency of successful collisions → the rate.

  3. For temperature, give both effects: more frequent collisions, and (the bigger effect) a larger fraction of collisions with at least EaE_a.

  4. Label every sketch: axes (number of particles and kinetic energy; enthalpy and reaction progress), EaE_a, the catalysed EaE_a, T1T_1 and T2T_2, ΔH\Delta H with the arrow pointing from reactants to products.

  5. To find an instantaneous rate, draw the tangent as long as you can, pick two points far apart on the tangent (not on the curve), and show the gradient calculation with units.

  6. When a question asks you to compare rates, quote the numbers you used, such as initial rates from two tangents, and say which is greater and by roughly how much.

  7. In an investigation, name the independent, dependent and controlled variables precisely ("concentration of HCl", "time for the cross to disappear", "volume and temperature of the thiosulfate solution").

  8. The rate of a disappearing-cross reaction is proportional to 1t\dfrac{1}{t}: a shorter time means a faster rate.

Where this shows up

  • Enzymes in washing powders and in the body, which let reactions run quickly at 37 °C that would otherwise need far higher temperatures.

  • Catalytic converters, where platinum, palladium and rhodium surfaces convert CO, unburnt fuel and nitrogen oxides into less harmful gases.

  • The Haber process, where an iron catalyst and a compromise temperature make ammonia fast enough to be economic.

  • Food storage: refrigeration slows the reactions that spoil food, and vacuum packing removes oxygen.

  • Dust explosions in flour mills, coal mines and grain silos, where a huge surface area lets combustion happen almost instantly.

  • Corrosion control on bridges, ships and pipelines: paint, galvanising, and sacrificial zinc or magnesium anodes.

  • Medicines, where tablet size and coating control how fast a drug dissolves and is absorbed.

Save your progress with a free account