Lesson 9 of 12 · 18 min

Strong, weak, concentrated and dilute

Use the Arrhenius model to explain how strong and weak acids and bases behave in water, write their ionisation equations, and keep strength and concentration apart.

What you will be able to do

  • Define acids and bases using the Arrhenius model.
  • Explain the difference between strong and weak acids and bases in terms of ionisation or dissociation.
  • Write ionisation equations for strong and weak acids and bases, with the right arrow.
  • Discriminate between strength and concentration.
  • Compare strong and weak acids of the same concentration by pH, conductivity and rate of reaction.

Hydrochloric acid and vinegar are both acids, yet you can splash vinegar on chips and you cannot do that with hydrochloric acid of the same concentration. In 1884 the Swedish chemist Svante Arrhenius explained the difference with a simple idea about what acids do when they dissolve.

Definition

The Arrhenius model

An acid is a substance that produces hydrogen ions, HX+(aq)\ce{H+(aq)}, in aqueous solution.

A base is a substance that produces hydroxide ions, OHX−(aq)\ce{OH-(aq)}, in aqueous solution. A base that dissolves in water is called an alkali.

When an acid neutralises a base, the hydrogen ions and hydroxide ions combine to form water: HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+(aq) + OH-(aq) -> H2O(l)}.

A hydrogen ion is a bare proton, so in water it attaches to a water molecule as the hydronium ion, HX3OX+\ce{H3O+}. Writing HX+(aq)\ce{H+(aq)} is a shorthand for it, and both appear in exam answers:

HCl(aq)→HX+(aq)+ClX−(aq)HCl(aq)+HX2O(l)→HX3OX+(aq)+ClX−(aq)\ce{HCl(aq) -> H+(aq) + Cl-(aq)} \qquad \ce{HCl(aq) + H2O(l) -> H3O+(aq) + Cl-(aq)}

Key idea

Strong and weak

Strength is about how completely an acid or base forms ions in water.

  • A strong acid ionises completely: essentially every molecule gives up its hydrogen ion. Hydrochloric, nitric and sulfuric acids are strong. Use a single arrow.
  • A weak acid ionises only partly: in 0.10 mol L−10.10\unit{mol\,L^{-1}} ethanoic acid only about 1 % of molecules are ionised at any moment. The ions and molecules are in equilibrium. Use the equilibrium arrow ⇌\ce{<=>}.
  • A strong base dissociates completely into hydroxide ions (sodium and potassium hydroxide). A weak base produces hydroxide ions only partly (ammonia).
Ionisation and dissociation equations.
SubstanceTypeEquation
hydrochloric acidstrong acidHCl(aq)→HX+(aq)+ClX−(aq)\ce{HCl(aq) -> H+(aq) + Cl-(aq)}
nitric acidstrong acidHNOX3(aq)→HX+(aq)+NOX3X−(aq)\ce{HNO3(aq) -> H+(aq) + NO3-(aq)}
ethanoic acidweak acidCHX3COOH(aq)⇌CHX3COOX−(aq)+HX+(aq)\ce{CH3COOH(aq) <=> CH3COO-(aq) + H+(aq)}
sodium hydroxidestrong baseNaOH(s)→NaX+(aq)+OHX−(aq)\ce{NaOH(s) -> Na+(aq) + OH-(aq)}
ammoniaweak baseNHX3(aq)+HX2O(l)⇌NHX4X+(aq)+OHX−(aq)\ce{NH3(aq) + H2O(l) <=> NH4+(aq) + OH-(aq)}
Interactive

Strong and weak side by side

Both beakers start at 0.10 mol L−10.10\unit{mol\,L^{-1}}. Compare the particles, pH, bulb brightness and bubbling on magnesium. Then change the concentrations.

Nitric acid is a strong acid. Write an equation, with states, for its ionisation in water.

Reads asYour answer shows here as chemistry.

Strength is not concentration

Concentration is how much acid is dissolved in each litre: concentrated or dilute. Strength is how completely it ionises: strong or weak. The two are independent, so any combination is possible.

The four combinations.
StrengthConcentratedDilute
Strong10 mol L−110\unit{mol\,L^{-1}} HCl\ce{HCl}: many acid particles, all ionised0.001 mol L−10.001\unit{mol\,L^{-1}} HCl\ce{HCl}: few acid particles, all ionised
Weak10 mol L−110\unit{mol\,L^{-1}} CHX3COOH\ce{CH3COOH}: many acid particles, few ionised0.001 mol L−10.001\unit{mol\,L^{-1}} CHX3COOH\ce{CH3COOH}: few acid particles, a small fraction ionised

Worked example

Hydrochloric and ethanoic acids of the same concentration

  • Complex familiar
  • Technology active

A student measures the pH of 0.10 mol L−10.10\unit{mol\,L^{-1}} hydrochloric acid as 1.0 and of 0.10 mol L−10.10\unit{mol\,L^{-1}} ethanoic acid as 2.9.

(a) Use the Arrhenius model, with equations, to explain the difference.

(b) Estimate the percentage of ethanoic acid molecules that are ionised.

(c) Predict how the two acids compare in electrical conductivity, in the rate of reaction with magnesium ribbon, and in the volume of sodium hydroxide solution needed to neutralise 25.0 mL of each.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Strong: complete ionisation, single arrow. Weak: partial, equilibrium arrow.

  2. Percentage ionised =[HX+]c×100= \frac{[\ce{H+}]}{c} \times 100 for a monoprotic acid.

  3. Rate and conductivity depend on [HX+][\ce{H+}]; the amount of base depends on the total moles of acid.

Watch out for

  • Predicting that the weak acid needs less sodium hydroxide.

  • Calling ethanoic acid "dilute" because its pH is higher. It has the same concentration as the hydrochloric acid.

Which description fits 0.0010 mol L−10.0010\unit{mol\,L^{-1}} hydrochloric acid?

Choose one answer

Methanoic acid, HCOOH\ce{HCOOH}, is a weak acid. Write an equation, with states, for its ionisation in water.

Reads asYour answer shows here as chemistry.

Note

Limits of the Arrhenius model

Arrhenius pictured a base as a compound that releases hydroxide ions it already contains, as NaOH\ce{NaOH} does. The model works well for acids and for those bases. It struggles with:

  • ammonia and sodium carbonate, which contain no hydroxide ions yet make water basic. They produce OHX−\ce{OH-} only by taking a hydrogen ion from a water molecule, a step the Arrhenius model does not describe;
  • reactions without water, such as NHX3(g)+HCl(g)→NHX4Cl(s)\ce{NH3(g) + HCl(g) -> NH4Cl(s)}, which is clearly a neutralisation.

The Brønsted–Lowry model in Unit 3, which describes acids as proton donors and bases as proton acceptors, handles both.

Common mistake

Strong does not mean concentrated, and weak does not mean safe

Write "strong" only about ionisation and "concentrated" only about amount. A concentrated weak acid (glacial ethanoic acid) causes serious burns, and a very dilute strong acid can be almost harmless.

Exam tip

Comparing strong and weak acids

At the same concentration, a strong acid has a higher [HX+][\ce{H+}] than a weak acid, so it has a lower pH, conducts electricity better (more ions) and reacts faster with metals and carbonates. Equal volumes of the two monoprotic acids still neutralise the same amount of base, because the weak acid's equilibrium shifts to release more HX+\ce{H+} as it is used up.

Summary

  • Arrhenius: acids produce HX+(aq)\ce{H+(aq)} and bases produce OHX−(aq)\ce{OH-(aq)} in water; neutralisation is HX++OHX−→HX2O\ce{H+ + OH- -> H2O}.

  • Strong acids and bases ionise or dissociate completely (single arrow); weak ones only partly (equilibrium arrow).

  • Hydrochloric, nitric and sulfuric acids are strong; ethanoic acid is weak. Sodium hydroxide is a strong base; ammonia is weak.

  • Strength (fraction ionised) and concentration (amount per litre) are independent.

  • At equal concentrations a strong acid has lower pH, higher conductivity and faster reactions than a weak acid.

  • The Arrhenius model cannot explain bases without hydroxide or reactions without water.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 9 of 120% read

Save your progress with a free account