Lesson 3 of 12 · 17 min

Dilution and the concentration of ions

Use c1V1=c2V2c_1V_1 = c_2V_2 to dilute a stock solution, and find the concentration of each ion when an ionic compound dissolves or two solutions are mixed.

What you will be able to do

  • Explain why the moles of solute do not change when a solution is diluted.
  • Use c1V1=c2V2c_1V_1 = c_2V_2 to find a final concentration, an aliquot volume or the water to add.
  • Write a dissociation equation and use its ratio to find the concentration of each ion.
  • Find an ion's concentration when two solutions are mixed.

Laboratories rarely weigh out a fresh solid for every experiment. They keep a concentrated stock solution and dilute a measured portion of it whenever a weaker solution is needed.

Adding water spreads the same solute particles through a larger volume. The number of moles of solute stays exactly the same; only the volume, and so the concentration, changes.

Dilution: moles before = moles after
n=c1V1=c2V2n = c_1V_1 = c_2V_2

Here c1c_1 and V1V_1 are the concentration and volume of the stock you take (the aliquot), and c2c_2 and V2V_2 are those of the diluted solution. Because the same volume unit appears on both sides, you can leave both volumes in mL, as long as you are consistent.

Interactive

Dilute a stock solution

Pipette an aliquot into the flask and fill to the mark. The colour fades because the same copper(II) ions are spread through more water.

Worked example

Diluting a stock acid

  • Simple familiar
  • Technology active

25.0 mL of 2.00 mol L−12.00\unit{mol\,L^{-1}} hydrochloric acid is transferred to a 250.0 mL volumetric flask and made up to the mark with water.

(a) Calculate the concentration of the diluted acid.

(b) What volume of water was added?

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. c1V1=c2V2c_1V_1 = c_2V_2, with both volumes in the same unit.

  2. Water added =V2−V1= V_2 - V_1.

Watch out for

  • Using 250.0 mL as the water added.

  • Getting a final concentration bigger than the stock: diluting always lowers the concentration.

10.0 mL of 1.50 mol L−11.50\unit{mol\,L^{-1}} hydrochloric acid is diluted to 250.0 mL with water. What is the concentration of the diluted acid?

in unitmol L -1

Give 3 significant figures.

What volume of 2.00 mol L−12.00\unit{mol\,L^{-1}} sodium hydroxide stock solution is needed to make 500.0 mL of 0.100 mol L−10.100\unit{mol\,L^{-1}} solution? Give your answer in mL.

in unitmL

Give 3 significant figures.

Common mistake

Final volume, not water added

V2V_2 is the total volume after dilution. Diluting 25.0 mL to 250.0 mL means adding 225.0 mL of water, not 250.0 mL. If a question asks how much water to add, find V2V_2 first and then subtract V1V_1.

Concentrations of ions

An ionic compound dissociates into its ions when it dissolves. The dissociation equation tells you how many of each ion come from one formula unit:

CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^2+(aq) + 2Cl-(aq)}

So in 0.100 mol L−10.100\unit{mol\,L^{-1}} calcium chloride, [CaX2+]=0.100 mol L−1[\ce{Ca^2+}] = 0.100\unit{mol\,L^{-1}} and [ClX−]=2×0.100=0.200 mol L−1[\ce{Cl-}] = 2 \times 0.100 = 0.200\unit{mol\,L^{-1}}.

Ion concentrations in 0.100 mol L−10.100\unit{mol\,L^{-1}} solutions of ionic compounds.
CompoundDissociationCation concentrationAnion concentration
NaCl\ce{NaCl}NaCl(s)→NaX+(aq)+ClX−(aq)\ce{NaCl(s) -> Na+(aq) + Cl-(aq)}[NaX+]=0.100[\ce{Na+}] = 0.100[ClX−]=0.100[\ce{Cl-}] = 0.100
CaClX2\ce{CaCl2}CaClX2(s)→CaX2+(aq)+2 ClX−(aq)\ce{CaCl2(s) -> Ca^2+(aq) + 2Cl-(aq)}[CaX2+]=0.100[\ce{Ca^2+}] = 0.100[ClX−]=0.200[\ce{Cl-}] = 0.200
NaX2SOX4\ce{Na2SO4}NaX2SOX4(s)→2 NaX+(aq)+SOX4X2−(aq)\ce{Na2SO4(s) -> 2Na+(aq) + SO4^2-(aq)}[NaX+]=0.200[\ce{Na+}] = 0.200[SOX4X2−]=0.100[\ce{SO4^2-}] = 0.100
AlClX3\ce{AlCl3}AlClX3(s)→AlX3+(aq)+3 ClX−(aq)\ce{AlCl3(s) -> Al^3+(aq) + 3Cl-(aq)}[AlX3+]=0.100[\ce{Al^3+}] = 0.100[ClX−]=0.300[\ce{Cl-}] = 0.300
AlX2(SOX4)X3\ce{Al2(SO4)3}AlX2(SOX4)X3(s)→2 AlX3+(aq)+3 SOX4X2−(aq)\ce{Al2(SO4)3(s) -> 2Al^3+(aq) + 3SO4^2-(aq)}[AlX3+]=0.200[\ce{Al^3+}] = 0.200[SOX4X2−]=0.300[\ce{SO4^2-}] = 0.300

What is [ClX−][\ce{Cl-}] in a 0.150 mol L−10.150\unit{mol\,L^{-1}} aluminium chloride, AlClX3\ce{AlCl3}, solution?

in unitmol L -1

Give 3 significant figures.

Worked example

Ion concentrations in a solution and a mixture

  • Complex familiar
  • Technology active

2.22 g of calcium chloride, CaClX2\ce{CaCl2}, is dissolved in water and made up to 200.0 mL.

(a) Calculate [CaX2+][\ce{Ca^2+}] and [ClX−][\ce{Cl-}] in the solution.

(b) 50.0 mL of this solution is mixed with 50.0 mL of 0.300 mol L−10.300\unit{mol\,L^{-1}} sodium chloride solution. Calculate [ClX−][\ce{Cl-}] in the mixture.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the concentration of the compound, then multiply by each ion's coefficient in the dissociation equation.

  2. For mixtures: total moles of the ion divided by total volume.

Watch out for

  • Writing [ClX−]=0.100 mol L−1[\ce{Cl-}] = 0.100\unit{mol\,L^{-1}} by forgetting the 2 in CaClX2\ce{CaCl2}.

  • Averaging 0.200 and 0.300 to get 0.250 by luck: it only works here because the volumes are equal.

100.0 mL of 0.300 mol L−10.300\unit{mol\,L^{-1}} NaCl\ce{NaCl} is mixed with 50.0 mL of 0.200 mol L−10.200\unit{mol\,L^{-1}} CaClX2\ce{CaCl2}. No reaction occurs. What is [ClX−][\ce{Cl-}] in the mixture?

in unitmol L -1

Give 3 significant figures.

Why c1V1=c2V2c_1V_1 = c_2V_2 works

Before dilution, the aliquot contains n=c1V1n = c_1V_1 moles of solute. Water adds no solute, so the diluted solution contains the same nn, now in volume V2V_2: n=c2V2n = c_2V_2. Setting the two expressions for nn equal gives c1V1=c2V2c_1V_1 = c_2V_2.

The same idea, "track the moles", also handles mixing two different solutions, where c1V1=c2V2c_1V_1 = c_2V_2 on its own does not apply: add the moles of each ion and divide by the total volume.

Exam tip

Show the ratio

When a question asks for an ion concentration, write the dissociation equation with states first. It shows the marker where your factor of 2 or 3 comes from, and stops you dividing when you should multiply.

Summary

  • Dilution keeps the moles of solute constant, so c1V1=c2V2c_1V_1 = c_2V_2.

  • V2V_2 is the final total volume; water added =V2−V1= V_2 - V_1.

  • Both volumes can stay in mL in the dilution formula, as long as they are in the same unit.

  • An ionic compound's dissociation equation gives each ion's concentration: in CaClX2\ce{CaCl2}, [ClX−]=2[CaClX2][\ce{Cl-}] = 2[\ce{CaCl2}].

  • When solutions are mixed, add the moles of each ion and divide by the total volume.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 120% read

Save your progress with a free account