Lesson 7 of 10 · 15 min
Series circuits
Describe series connections and solve series circuits using one current, potential differences that add, and resistances that add.
What you will be able to do
- Describe a series connection and the properties of a series circuit.
- Use and to find currents and potential differences.
- Explain how the supply potential difference divides between resistors in series.
Older strings of Christmas lights had a frustrating habit. When one globe blew, the whole string went dark, and you had to test every globe to find the culprit. The globes were connected in series.
Definition
Series connection
Components are in series when they are connected end to end in a single path, with no junctions between them. All the charge that passes through one component must pass through the next.
A series circuit. The ammeter could go anywhere in the loop and read the same current. The voltmeter measures the potential difference across only.
Three rules follow from the two conservation laws.
- The current is the same everywhere. There is only one path and charge is conserved, so the same charge passes every point each second: .
- The potential differences add up to the supply. Each coulomb transfers all the energy it gained in the battery, shared between the resistors. This is Kirchhoff's voltage law: .
- The resistances add. The equivalent resistance is , so adding a resistor in series always increases the total.
In the circuit above, , so the current is . Then and , which add to 12 V.
The same current passes through every resistor, and the three potential differences add up to the battery's 12 V. Make one resistor much larger than the others. Which resistor takes the biggest share of the potential difference?
Why series resistances add
Each resistor carries the same current , so by the potential differences are and . The supply potential difference is their sum:
A single resistor drawing the same current from the same supply needs , so .
Worked example
Solving a series circuit
A 12 V battery is connected in series with resistors of 2.0 Ω, 4.0 Ω and 6.0 Ω. Find (a) the equivalent resistance, (b) the current, and (c) the potential difference across each resistor.
Step 1: Add the series resistances
Step 2: Find the current
In series there is one path, so this current flows through every resistor.
Step 3: Find each potential difference
, ,
Step 4: Check with the loop law
, the battery's potential difference. Energy is conserved.
Try it yourself first, then check the working one step at a time.
Answer
(a) . (b) . (c) , and .
Method
Add series resistances: .
Current from , the same through each resistor.
for each resistor; check that they add to the supply.
Watch out for
Putting the full 12 V across one resistor. In series the supply is shared.
Resistors of 15 Ω, 33 Ω and 12 Ω are connected in series. What is their equivalent resistance?
Every resistor in series carries the same current, so by each one's share of the supply potential difference is proportional to its resistance. Twice the resistance takes twice the potential difference:
This is how a voltage divider works: two resistors in series split a supply into smaller, fixed potential differences.
A 9.0 V battery is connected in series with a 1.0 kΩ resistor and a 2.0 kΩ resistor. What is the potential difference across the 2.0 kΩ resistor?
Common mistake
What is shared in series
The current isn't used up as it goes round a series circuit; it's the same through every component. What is shared out is the potential difference, the energy per coulomb.
Two consequences explain the old Christmas lights. Adding another lamp in series increases the total resistance, so the current falls and every lamp gets dimmer. And because there is only one path, a break anywhere, such as a blown filament, stops the current everywhere.
Two identical lamps are connected in series to a battery. A third identical lamp is added in series. What happens to the brightness of the first two lamps?
Exam tip
Solve, then check
In multi-step series questions, find , then the current, then each potential difference. Finish by checking that the potential differences add to the supply: that one line catches most slips.
Summary
In a series circuit there is one path, so the current is the same through every component.
The potential differences add to the supply, , because energy is conserved round the loop.
, so adding a series resistor increases the total resistance and reduces the current.
The supply potential difference is shared in proportion to resistance: .
A break anywhere in a series circuit stops the current everywhere.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.