Lesson 2 of 10 · 15 min
Potential difference: energy per coulomb
Explain potential difference as the energy each coulomb of charge gains or transfers, explain why separating charge creates it, and use .
What you will be able to do
- Describe electrical potential difference as the energy transferred per unit charge.
- Explain in qualitative terms why separating charge produces a potential difference.
- Solve problems with , including with .
- Explain why the energy supplied to the charges in a circuit equals the energy transferred by the loads.
A 1.5 V AA cell and a 9 V battery can both light the same small torch globe, but the 9 V battery makes it far brighter, and may blow it. The difference isn't how much charge flows round: charge is conserved either way. It's how much energy each coulomb of charge carries from the battery to the globe.
Inside a cell, chemical reactions do work pushing electrons onto one terminal and pulling them off the other. Electrons build up on the negative terminal, and the positive terminal is left short of electrons.
Opposite charges attract, so pulling them apart takes work, just as lifting a mass against gravity does. That work is stored as electrical potential energy, and the separated charges create a potential difference between the terminals. Give the charges a conducting path and they flow through it, transferring that stored energy to the components along the way.
Chemical reactions do work separating charge. The separated charges create a potential difference between the terminals.
Lifting a mass
Work done against gravity lifts water up a hill and stores gravitational potential energy. The height difference sets how much energy each kilogram gains going up and gives back coming down.
Separating charge
Work done against electric attraction separates charge in a cell and stores electrical potential energy. The potential difference sets how much energy each coulomb gains in the cell and gives up in the loads.
Definition
Electrical potential difference
The potential difference between two points is the work done (energy transferred) per unit charge moving between them:
where is in volts (V), is the energy in joules (J) and is the charge in coulombs (C). One volt is one joule per coulomb: .
In the cell, each coulomb gains energy as chemical energy becomes electrical potential energy. In each load, such as a lamp, heater or motor, each coulomb transfers energy to light, heat or motion.
So the potential difference across a component measures the energy available to the charges moving through it. A voltmeter measures this difference between two points, which is why it connects across a component, in parallel with it.
Each coulomb gains 9 J in the battery. The potential difference across each resistor is the energy each coulomb transfers there. Change the resistors. Do the two potential differences always add up to the battery's?
Key idea
Energy in equals energy out
Around a complete loop, the energy each coulomb gains in the source equals the total energy it transfers in the loads:
Multiply every term by the charge that flows and the same holds for total energy: the energy input from the source equals the sum of the energy outputs of the loads. This is conservation of energy, and it is one of Kirchhoff's two circuit laws.
Worked example
Energy transferred by a battery
A 12 V car battery drives 250 C of charge through the headlights. How much energy does the battery transfer to the charge?
Step 1: Interpret the potential difference
A 12 V battery gives each coulomb of charge 12 J of energy.
: potential difference is energy per coulomb.
Step 2: Rearrange for
Step 3: Substitute and calculate
Try it yourself first, then check the working one step at a time.
Answer
The battery transfers (3.0 kJ) of energy.
Method
Potential difference is energy per coulomb.
Use to find energy from charge and potential difference.
Watch out for
Dividing instead of multiplying gives , which has no meaning here. Check the units: coulombs times joules per coulomb gives joules.
A battery does 72 J of work moving 6.0 C of charge round a circuit. What is the potential difference across the battery?
How much energy does one electron gain as it passes through a 1.5 V cell? Use .
Often you know the current and the time rather than the charge. Find the charge first with , then the energy with . Combined:
Keep the time in seconds.
Worked example
The energy stored in a phone battery
A phone battery is labelled 3.85 V and 4000 mA h. The rating 4000 mA h means it can deliver a current of 4000 mA for one hour. How much energy does the fully charged battery store?
Step 1: Convert to SI units
and .
Step 2: Find the charge
A milliampere hour is a unit of charge, current multiplied by time. Converting it to coulombs lets you use .
Step 3: Find the energy
Step 4: Check it is reasonable
A 2.2 kW kettle transfers this much energy in about . A phone battery holding about half a minute of kettle energy is believable.
Try it yourself first, then check the working one step at a time.
Answer
The battery stores about (about 55 kJ).
Method
Convert the mA h rating to coulombs with .
Multiply by the battery's potential difference to get joules.
Watch out for
Multiplying 4000 by 3.85 directly gives 15 400, which is in milliwatt hours, not joules.
A 12 V car battery supplies a current of 5.0 A to the headlights for 2.0 minutes. How much energy does it transfer?
Common mistake
Across, not through
Potential difference is measured between two points, so it is across a component, never through it. And it is energy per coulomb, not the energy itself: a 12 V battery gives each coulomb 12 J, however many coulombs flow.
Why does a battery go flat?
A battery goes flat when the chemicals that drive the charge separation are used up, so it can no longer give energy to charges. The charge itself is never used up. A flat battery contains exactly as much charge as a new one; what has run out is its store of chemical energy.
Summary
Potential difference is energy per unit charge, , measured in volts: .
A cell uses chemical reactions to separate charge. The work done is stored as electrical potential energy, which creates a potential difference between the terminals.
Charges gain energy in the source and transfer it in the loads. The potential difference across a component measures the energy available to each coulomb there.
Energy is conserved round a loop: the supply potential difference equals the sum of the potential differences across the loads.
With current and time, find the charge first: .
Voltmeters connect across a component, in parallel.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.