Lesson 8 of 10 · 16 min

Parallel circuits

Describe parallel connections and solve parallel circuits using one potential difference, currents that add at junctions, and an equivalent resistance smaller than any branch.

What you will be able to do

  • Describe a parallel connection and the properties of a parallel circuit.
  • Use It=I1+I2+⋯I_t = I_1 + I_2 + \cdots and 1Rt=1R1+1R2+⋯\dfrac{1}{R_t} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \cdots to find currents and equivalent resistance.
  • Apply Kirchhoff's current law at a junction.
  • Explain why adding branches lowers the total resistance and raises the total current.

Switch off the kitchen light and the fridge keeps running. Every appliance in a house can be switched on and off by itself because each one is connected in parallel, across the same two supply wires.

Definition

Parallel connection

Components are in parallel when they are connected across the same two points, each in its own branch. The current splits at one junction, flows through the branches side by side, and recombines at the other junction.

Two resistors in parallel. Each branch has the full 12 V across it: I1=2.0 AI_1 = 2.0\unit{A}, I2=4.0 AI_2 = 4.0\unit{A}, and the ammeter in the main line reads 6.0 A6.0\unit{A}.

Again, the rules come from the conservation laws.

  1. Every branch has the same potential difference, equal to the supply's. Each coulomb passes through only one branch, so it transfers all its energy there: Vt=V1=V2=⋯V_t = V_1 = V_2 = \cdots.
  2. The branch currents add up to the total current. Charge is conserved at a junction, so the current in equals the current out: It=I1+I2+⋯I_t = I_1 + I_2 + \cdots.
  3. The reciprocals of the resistances add, so the equivalent resistance is smaller than the smallest branch.

In the circuit above, I1=126.0=2.0 AI_1 = \dfrac{12}{6.0} = 2.0\unit{A} and I2=123.0=4.0 AI_2 = \dfrac{12}{3.0} = 4.0\unit{A}, so the battery supplies 6.0 A6.0\unit{A}, the same current a single 2.0 Ω2.0\unit{\Omega} resistor would draw.

Key idea

Kirchhoff's current law

At any junction, the total current flowing in equals the total current flowing out.

This is conservation of charge. Charge can't pile up at a junction or vanish from it, so every coulomb that arrives each second must leave.

Currents in parallel
It=I1+I2+⋯+InI_t = I_1 + I_2 + \cdots + I_n
Equivalent resistance in parallel
1Rt=1R1+1R2+⋯+1Rn\frac{1}{R_t} = \frac{1}{R_1} + \frac{1}{R_2} + \cdots + \frac{1}{R_n}
Interactive

Two branches in parallel

Each branch has the full 12 V across it. Check that the branch currents add to the total. Then lower one branch's resistance. What happens to its current, to the other branch's current, and to the total?

Where the reciprocal rule comes from

Each branch has the supply potential difference VV across it, so the branch currents are I1=VR1I_1 = \dfrac{V}{R_1} and I2=VR2I_2 = \dfrac{V}{R_2}. They add to the total current, which a single equivalent resistor would draw as It=VRtI_t = \dfrac{V}{R_t}:

VRt=VR1+VR2⇒1Rt=1R1+1R2\frac{V}{R_t} = \frac{V}{R_1} + \frac{V}{R_2} \quad\Rightarrow\quad \frac{1}{R_t} = \frac{1}{R_1} + \frac{1}{R_2}

For exactly two resistors this rearranges to the "product over sum" shortcut, Rt=R1R2R1+R2R_t = \dfrac{R_1R_2}{R_1 + R_2}. It only works two at a time.

Worked example

Solving a parallel circuit

  • Complex familiar
  • Technology active

A 6.0 Ω resistor and a 12 Ω resistor are connected in parallel across a 12 V battery. Find (a) the equivalent resistance, (b) the current in each resistor, and (c) the current from the battery.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Add reciprocals, then invert, for the equivalent resistance.

  2. Each branch has the supply potential difference across it.

  3. Branch currents add to the total.

Watch out for

  • Stopping at 1Rt=0.25\frac{1}{R_t} = 0.25 and giving 0.25 Ω0.25\unit{\Omega}.

  • Splitting the 3.0 A equally between the branches. The smaller resistance carries the larger current.

A 20 Ω resistor and a 5.0 Ω resistor are connected in parallel. What is their equivalent resistance?

in Omega

Give 2 significant figures.

Common mistake

Flip the answer

After adding the reciprocals, invert: 120+15.0=0.25\dfrac{1}{20} + \dfrac{1}{5.0} = 0.25, so Rt=4.0 ΩR_t = 4.0\unit{\Omega}, not 0.25 Ω0.25\unit{\Omega}. Quick check: a parallel combination is always smaller than its smallest branch.

A current of 2.5 A flows into a junction. Two wires leave it, and one carries 0.80 A. What current flows in the other?

in A

Give 2 significant figures.

Each new branch gives the charge another path, so the equivalent resistance falls and the total current from the supply rises. With an ideal supply the existing branches are unaffected: each still has the full potential difference across it and carries the same current as before.

That's why piling appliances onto one power board is risky. Each adds its own current, and the total flows through the board and its lead. On a hot day, with a fan, a portable air conditioner and a fridge all running, the total can exceed what the board is rated for.

Three resistors are connected in parallel across a battery. A fourth resistor is then connected in parallel with them. Assuming the battery's potential difference stays the same, which statement is correct?

Choose one answer

Summary

  • Components in parallel are connected across the same two points, each in its own branch.

  • Every branch has the same potential difference, equal to the supply's.

  • Kirchhoff's current law: the current into a junction equals the current out, because charge is conserved. So It=I1+I2+⋯I_t = I_1 + I_2 + \cdots.

  • 1Rt=1R1+1R2+⋯\dfrac{1}{R_t} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \cdots. Remember to invert; RtR_t is less than the smallest branch.

  • Current divides with the largest current through the smallest resistance.

  • Adding branches lowers the total resistance and raises the total current, which is why overloading a power board is dangerous.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 100% read

Save your progress with a free account