Lesson 9 of 10 · 18 min
Combination circuits and Kirchhoff's laws
Reduce series–parallel circuits to one equivalent resistance, work back to every current and potential difference, and solve or check circuits with Kirchhoff's laws.
What you will be able to do
- Reduce a series–parallel circuit to its equivalent resistance.
- Find the current through, and potential difference across, every resistor in a combination circuit.
- State Kirchhoff's current and voltage laws as conservation of charge and energy, and use them to find unknown readings.
Most real circuits mix series and parallel. A car's headlights are in parallel with each other but in series with their switch and fuse; a phone's circuit board is full of both. You don't need new physics for these, just a strategy: simplify the circuit to one resistance, find the total current, then work back out.
Key idea
Kirchhoff's two laws
Current law (junction rule). At any junction, the total current in equals the total current out. This is conservation of charge.
Voltage law (loop rule). Around any closed loop, the potential difference supplied equals the sum of the potential differences across the loads. This is conservation of energy: each coulomb gives up all the energy it gained.
The series and parallel rules you have been using are these two laws applied to simple circuits.
History
Gustav Kirchhoff
Gustav Kirchhoff stated his two circuit laws in 1845, while still a 21-year-old student in Königsberg, extending Ohm's work to networks of any shape. He went on to help found spectroscopy, using the dark lines in the Sun's spectrum to identify the elements in it.
Solving a combination circuit
Spot the groups
Find resistors that are purely in parallel (connected between the same two junctions) or purely in series (one path, no junction between them).
Reduce to one resistance
Replace each parallel group with its equivalent resistance, then add series resistances, until a single is left.
Find the total current
. This current flows through the battery and every resistor in series with it.
Work back out
Find the potential difference across each series resistor with . The parallel group gets what is left of the supply: .
Find the branch currents
Each branch of the parallel group has across it, so .
Check with Kirchhoff
The branch currents must add to the total, and the potential differences round each loop must add to the supply.
The 2 Ω resistor is in series with a parallel pair of 12 Ω and 6 Ω. Check both of Kirchhoff's laws on the readings, then change the series resistor and predict what happens to the parallel pair before you look.
Worked example
Solving a combination circuit
An 18 V battery is connected to a 2.0 Ω resistor in series with a parallel pair, and , as shown. Find the current through and potential difference across each resistor.
Step 1: Replace the parallel pair
and connect between the same two junctions, so they are in parallel.
Step 2: Add the series resistor
Step 3: Find the total current
, which is the current through .
Step 4: Find the potential difference across
Step 5: Find the potential difference across the pair
, across both and .
Kirchhoff's voltage law round the loop through the battery, and either branch.
Step 6: Find the branch currents
and .
Step 7: Check with the current law
, the total current. Both of Kirchhoff's laws are satisfied.
Try it yourself first, then check the working one step at a time.
Answer
: 3.0 A and 6.0 V. : 1.0 A and 12 V. : 2.0 A and 12 V.
Method
Replace parallel groups with their equivalent, add series resistances.
Total current from the supply and the total resistance.
Series potential differences with ; the parallel group gets the rest.
Branch currents from the parallel potential difference; check with Kirchhoff's laws.
Watch out for
Putting the full 18 V across the parallel pair.
Adding all three resistances as if they were in series.
A 4.0 Ω resistor is connected in series with two 10 Ω resistors that are in parallel with each other. What is the equivalent resistance of the combination?
A 12 V battery is connected to a 4.0 Ω resistor in series with a parallel pair of 6.0 Ω and 12 Ω resistors. What is the current through the 12 Ω resistor?
Common mistake
The parallel group gets what is left
In a combination circuit the parallel group does not have the full supply potential difference across it. The series resistor takes its share first, and the group gets the rest: .
Worked example
Using Kirchhoff's laws with meter readings
In the circuit shown, ammeter reads 0.60 A, ammeter reads 0.25 A and the voltmeter across lamp X reads 3.5 V. The battery provides 9.0 V and the lamps are non-ohmic. Find (a) the current through lamp Z, (b) the potential difference across lamps Y and Z, and (c) the power of each lamp.
Step 1: Use the current law at the junction
The 0.60 A arriving at the junction must all leave it, split between lamps Y and Z.
Step 2: Use the voltage law round a loop
, so . Z is in parallel with Y, so too.
Round the loop through the battery, X and Y, the potential differences across the loads add to the 9.0 V supplied.
Step 3: Find each power with
, ,
Step 4: Check energy in equals energy out
The battery supplies , and .
Try it yourself first, then check the working one step at a time.
Answer
(a) . (b) across each. (c) X 2.1 W, Y 1.4 W, Z 1.9 W.
Method
Current law at a junction for unknown currents.
Voltage law round a loop for unknown potential differences.
for each component, then check the powers add to the supply's.
Watch out for
Trying to use resistances. You don't need them, and with non-ohmic lamps you couldn't assume them anyway; Kirchhoff's laws work for any components.
Halving 5.5 V between Y and Z. Components in parallel each have the full potential difference across them.
A 9.0 V battery is connected to lamp X in series with two lamps, Y and Z, that are in parallel with each other. The potential difference across X is 3.5 V. What is the potential difference across Z?
Exam tip
Label as you reduce
Show each reduction and name each equivalent, for example " (parallel), so ". Markers can then award method marks even if a slip creeps in later. Write each current and potential difference on the diagram as you find it.
Summary
Kirchhoff's current law: the total current into a junction equals the total current out (conservation of charge).
Kirchhoff's voltage law: round any loop, the supply potential difference equals the sum of the potential differences across the loads (conservation of energy).
Reduce a combination circuit by replacing parallel groups with their equivalent and adding series resistances.
Find the total current, then work back out to each resistor's potential difference and current.
The parallel group gets only the potential difference left after the series resistors.
Kirchhoff's laws work for any components, ohmic or not, so use them to check every answer.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.