Lesson 3 of 10 · 16 min

Electrical power and energy

Use P=WtP = \dfrac{W}{t} and P=VIP = VI to find the power of devices, work out energy in joules and kilowatt hours, and compare the running cost and efficiency of household devices.

What you will be able to do

  • Describe power as the rate at which energy is transferred in a circuit.
  • Solve problems with P=WtP = \dfrac{W}{t} and P=VIP = VI.
  • Convert between joules and kilowatt hours, and calculate running costs.
  • Compare the efficiency of lighting technologies and explain why it matters.

On a 40 °C afternoon, hundreds of thousands of air conditioners across south-east Queensland switch on within an hour or two of each other. Each one transfers a couple of thousand joules of energy every second, and the electricity network has to supply all of them at once. That rate of energy transfer is power, and it's the number printed on every appliance.

Definition

Power

Power is the rate at which energy is transferred:

P=WtP = \frac{W}{t}

where PP is the power in watts (W), WW is the energy transferred in joules (J) and tt is the time in seconds (s). One watt is one joule per second: 1 W=1 J s−11\unit{W} = 1\unit{J\,s^{-1}}. A 2000 W kettle transfers 2000 J of energy to the water every second.

Energy transferred grows steadily with time. The gradient of each line is the power, so a steeper line means energy is transferred faster.

In a circuit, power comes from the potential difference and the current. Each coulomb transfers VV joules, and II coulombs pass every second, so the energy transferred each second is V×IV \times I:

P=Wt=qVt=V qt=VIP = \frac{W}{t} = \frac{qV}{t} = V\,\frac{q}{t} = VI
Electrical power, from the formula and data book
P=VIP = VI
Interactive

Power from potential difference and current

Multiply the potential difference by the current and compare with the power shown. Then double the battery's potential difference. What happens to the current, and to the power?

Typical power ratings. Real values vary from model to model.
DeviceTypical powerCurrent drawn at 230 V
LED globe9 W0.039 A
Phone charger (while charging)20 W0.087 A
Laptop60 W0.26 A
Television120 W0.52 A
Electric kettle2.2 kW9.6 A
Reverse-cycle air conditioner2.4 kW10 A

Worked example

Power and energy of a kettle

  • Simple familiar
  • Technology active

An electric kettle connected to the 230 V mains draws a current of 9.6 A. (a) Calculate its power. (b) How much energy does it transfer in 3.0 minutes?

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. P=VIP = VI for power from potential difference and current.

  2. W=PtW = Pt for energy, with time in seconds.

Watch out for

  • Using t=3.0t = 3.0 gives 6600 J, the energy in 3 seconds, not 3 minutes.

A hair dryer transfers 9.0×104 J9.0 \times 10^{4}\unit{J} of energy in 1.0 minute. What is its power?

in W

Give 2 significant figures.

A 1.2 kW microwave oven runs on the 230 V mains. What current does it draw?

in A

Give 2 significant figures.

Joules are tiny next to household energy use, so electricity retailers use the kilowatt hour (kW h): the energy a 1 kW device transfers in one hour.

1 kW h=1000 W×3600 s=3.6×106 J1\unit{kW\,h} = 1000\unit{W} \times 3600\unit{s} = 3.6 \times 10^{6}\unit{J}

For energy in kW h, multiply the power in kilowatts by the time in hours. For the cost, multiply the energy by the price per kW h.

Tip

Keep units matched

Watts times seconds gives joules. Kilowatts times hours gives kilowatt hours. Mix them, as in kilowatts times seconds, and your answer is out by a factor of 1000 or 3600.

Worked example

Running an air conditioner through a heatwave

  • Complex unfamiliar
  • Technology active

During a five-day heatwave, a household runs its 2.5 kW air conditioner for 12 hours a day. Electricity costs 30 c per kW h.

(a) How much energy does the air conditioner use over the heatwave, in kW h? (b) What does that energy cost? (c) What current does the air conditioner draw from the 230 V supply? (d) A 50 W ceiling fan is run for the same time instead. Compare the costs and comment.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Total time in hours, then energy in kW h as power in kW times hours.

  2. Cost is energy times price per kW h.

  3. Current from I=PVI = \dfrac{P}{V} with power in watts.

Watch out for

  • Using 2500 W with hours gives 150 000, which is in watt hours, not kilowatt hours.

  • Forgetting to multiply by the five days.

A 2.0 kW fan heater runs for 3.0 hours. Electricity costs 30 c per kW h. What does it cost to run, in dollars?

in dollars

Round to 2 decimal places.

Lighting shows why efficiency matters. An incandescent globe makes light by heating a thin tungsten filament to about 2500 °C, and only a few per cent of the electrical energy it transfers comes out as visible light; the rest heats the room. An LED makes light directly in a semiconductor, so it needs far less power for the same brightness. A 9 W LED globe gives about as much light as a 60 W incandescent globe.

Concern about energy use and global warming drove international research into efficient lighting. The blue LED, which made white LED lighting possible, earned Isamu Akasaki, Hiroshi Amano and Shuji Nakamura the 2014 Nobel Prize in Physics, and in 2009 Australia began phasing out most incandescent globes.

Note

Standards and a stable supply

Appliances sold in Australia must meet joint Australian and New Zealand standards, many based on international standards, and many carry an Energy Rating label so you can compare running costs. Agreeing on those standards takes cooperation between scientists, engineers, manufacturers and governments in many countries, and it lets a device designed in one country be sold and used safely in another.

Phones, computers, hospitals and the internet all depend on that supply staying steady. Data centres keep banks of batteries and generators on standby so that a blackout doesn't take their services down.

A 9 W LED globe replaces a 60 W incandescent globe that gives the same light. How much energy does the LED save over 1000 hours of use, in kW h?

in kW h

Give 2 significant figures.

Common mistake

Power is not energy

Watts and kilowatts measure power, a rate. Joules and kilowatt hours measure energy, an amount. "The heater draws 2 kW" is a rate; "the heater used 6 kW h" is an amount. A bill charges for energy, so multiply power by time before you multiply by the price.

Summary

  • Power is the rate of energy transfer, P=WtP = \dfrac{W}{t}, measured in watts: 1 W=1 J s−11\unit{W} = 1\unit{J\,s^{-1}}.

  • In a circuit P=VIP = VI: each coulomb transfers VV joules, and II coulombs pass each second.

  • 1 kW h=3.6×106 J1\unit{kW\,h} = 3.6 \times 10^{6}\unit{J}. Energy in kW h is power in kW times time in hours, and cost is energy times price.

  • Efficient devices such as LED globes transfer more of their energy to useful forms, so they need less power for the same job.

  • Peak demand in heatwaves and cold snaps, and our reliance on electronics, make efficiency and a stable supply matter.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 100% read

Save your progress with a free account