Chemistry · Unit 1 · Topic 2

Properties and structure of materials

Tell pure substances from mixtures and separate them, explain the properties of ionic, metallic and covalent substances from their bonding, classify materials from data, and distinguish alkanes from alkenes with bromine water.

  • 6 lessons
  • 1 h 48 min of lessons
  • 12 worked examples
  • 5 hours in the syllabus
0 of 6

Start here

Pure substances and mixtures

Lesson 1 of 6 · 18 min

Start the topic

Lessons

6
  1. Pure substances and mixtures (up next)

    Sort matter into elements, compounds and mixtures, tell homogeneous from heterogeneous mixtures, and use melting point and density data to identify substances and judge purity.

  2. Separating mixtures

    Choose a separation method from a difference in physical properties, plan and evaluate a separation, and see how water analysis led Ellen Swallow Richards to the first water quality standards.

  3. Ionic lattices and metallic bonding

    Model ionic compounds as a lattice of oppositely charged ions and metals as cations in a sea of delocalised electrons, use each model to explain melting point, conductivity, hardness and brittleness, and tell the two apart.

  4. Covalent molecules, networks and carbon's allotropes

    Model the covalent bond, explain why covalent molecular substances and giant covalent networks have such different properties, compare diamond, graphite, graphene and fullerenes, and see why nanomaterials behave differently.

  5. Classifying substances from property data

    Use melting points, electrical conductivity, solubility and hardness data to decide whether a substance is ionic, metallic, covalent molecular or a covalent network, and plan and evaluate the tests that give that data.

  6. Carbon, hydrocarbons and the bromine water test

    See why carbon's bonding makes it the basis of life, write formulas of alkanes and alkenes, explain how single bonds, double bonds and benzene's ring set their reactions, and distinguish alkanes from alkenes with bromine water.

  7. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Why does salt shatter when you hit it, while copper bends? Why does diamond scratch glass, but graphite leaves a mark on paper, when both are pure carbon? The answers are in the particles a substance is made of and the forces that hold them together.

In this topic you sort matter into elements, compounds and mixtures, and use melting points and densities to tell them apart. You separate mixtures using differences in their physical properties. Then you model ionic, metallic and covalent bonding and use each model to explain a substance's melting point, conductivity, hardness and brittleness, until you can look at a table of property data and say what kind of structure each substance has. You finish with carbon: its allotropes, nanomaterials, and the hydrocarbons, where one double bond decides whether bromine water loses its colour.

Before you start

Builds on Properties and structure of atoms.

  • Atoms, ions and electron configurations, and the idea that atoms lose, gain or share electrons to bond (Unit 1 Topic 1).
  • Formulas of ionic and molecular compounds, such as NaCl\ce{NaCl}, MgO\ce{MgO}, HX2O\ce{H2O} and COX2\ce{CO2}, and Lewis structures of small molecules (Unit 1 Topic 1).
  • Solids, liquids and gases described with particles, and physical versus chemical change (Years 7–10 science).
  • Density as mass per unit volume, and rearranging a formula (Years 8–10).

What QCAA says you need to know22 dot points

Compounds and mixtures

Bonding and properties

Science as a human endeavour

Science inquiry

Subject matter from the Chemistry General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Pure substances and mixtures

    Sort matter into elements, compounds and homogeneous or heterogeneous mixtures, and say how each one's properties behave.

    Practise
  • Melting point and density data

    Use melting behaviour and density (with $\rho = \frac{m}{V}$) to identify substances, judge purity and explain the effect of impurities.

    Practise
  • Separating mixtures

    Choose and justify a separation method from a difference in physical properties, and evaluate a separation or water-quality investigation.

    Practise
  • Ionic and metallic bonding

    Model ionic lattices and metallic bonding, explain their properties, and tell the two kinds of bonding apart.

    Practise
  • Covalent molecules and networks

    Model a covalent bond, and explain why covalent molecular substances and giant covalent networks have such different properties.

    Practise
  • Allotropes of carbon

    Explain the properties of diamond, graphite, graphene and fullerenes from their structures.

    Practise
  • Classifying substances from data

    Use melting points, conductivity, solubility and hardness data to decide a substance's structure and bonding, and plan and evaluate the tests.

    Practise
  • Nanomaterials

    Recognise the nanoscale (1–100 nm), explain why size changes properties, and weigh benefits against risks.

    Practise
  • Alkanes, alkenes and benzene

    Write formulas of alkanes and alkenes, explain how their bonding sets their reactions, and distinguish them with bromine water.

    Practise

Worked examples12

All 12

Common mistakes

Saying an ionic solid conducts because it contains ions

Conduction needs charged particles that can move. In solid NaCl\ce{NaCl} the ions are locked in the lattice, so it does not conduct. Melted or dissolved, the ions are free to move, so it does.

Saying covalent bonds break when a molecular substance melts

Melting ice or boiling water separates whole HX2O\ce{H2O} molecules from each other by overcoming the weak forces between molecules. The O−H\ce{O-H} covalent bonds inside each molecule stay intact. That is why molecular substances have low melting points.

Calling all covalent substances low-melting

Only covalent molecular substances melt easily. Giant covalent networks such as diamond and silicon dioxide melt or sublime only above about 1700 °C, because melting them means breaking many strong covalent bonds.

Saying graphite conducts because it is a metal

Graphite is a non-metal: a giant covalent network of carbon. It conducts along its layers because each carbon uses three electrons in covalent bonds and the fourth is delocalised across the layer.

Using "mixture" and "compound" interchangeably

A compound has its elements chemically bonded in a fixed ratio (water is always HX2O\ce{H2O}). A mixture can have any proportions and its parts keep their own properties, so a physical method can separate them.

Saying metals conduct because of free ions

In a solid metal the positive ions stay in place. The current is carried by the delocalised electrons, which drift through the lattice.

Calling benzene an alkene

Benzene has a ring of delocalised electrons, not three ordinary C=C\ce{C=C} bonds. It does not decolourise bromine water at room temperature, because addition would destroy the stable delocalised ring.

Reporting "bromine water goes clear"

"Clear" means transparent, and bromine water is already clear. Write that the orange (yellow-brown) colour disappears and the mixture becomes colourless.

Mixing up nanometres and micrometres

1 µm = 1000 nm. A particle 50 µm across is 50 000 nm, far outside the 1–100 nm nanoscale.

Exam tips

  1. "Explain" a property by linking three things: the particles (ions, atoms, molecules, delocalised electrons), the force or bond that must be overcome or that allows movement, and the property itself.

  2. For conductivity, always say what the mobile charged particles are: delocalised electrons in metals and graphite; ions only when an ionic compound is molten or in solution.

  3. For melting points, say which forces are overcome: ionic bonds, metallic bonds, covalent bonds throughout a network, or only weak intermolecular forces between molecules.

  4. When classifying from data, use every column. A high melting point alone does not decide: ionic, metallic and network covalent substances all melt high, so conductivity as a solid and as a liquid is what tells them apart.

  5. Bromine water results: write the observation (orange to colourless, or no change) and then the conclusion (unsaturated, or saturated). Observation and conclusion are marked separately.

  6. Write formulas and equations with correct cases and subscripts: CX2HX4\ce{C2H4}, not c2h4 or C2h4.

  7. Show working for density: formula, substitution with units, answer with a unit and significant figures that match the data.

  8. "Evaluate" a method or claim: judge it with evidence from the data, give a limitation, and suggest an improvement.

Where this shows up

  • Water treatment plants in Queensland, which use screening, settling, filtration and disinfection to meet drinking-water standards first set in the tradition Ellen Swallow Richards started.

  • Gold refining and assaying, where density and melting behaviour reveal whether a sample is pure or alloyed.

  • Choosing materials in engineering, from copper wiring and aluminium aircraft to ceramic insulators and diamond-tipped drill bits.

  • Graphite in pencils, lubricants and lithium-ion battery anodes; graphene in experimental sensors and composites.

  • Nanoparticle sunscreens, antibacterial silver dressings and the gold nanoparticles that colour the line on a rapid antigen test.

  • Margarine and spreads, made by adding hydrogen across the C=C\ce{C=C} bonds of unsaturated vegetable oils.

  • Fractional distillation of crude oil into fuels, and the alkenes from cracking that become plastics such as polyethene.

  • Astrobiology missions searching for carbon-based molecules on Mars and the icy moons Europa and Enceladus.

Save your progress with a free account