Lesson 4 of 6 · 20 min
Covalent molecules, networks and carbon's allotropes
Model the covalent bond, explain why covalent molecular substances and giant covalent networks have such different properties, compare diamond, graphite, graphene and fullerenes, and see why nanomaterials behave differently.
What you will be able to do
- Model a covalent bond as a shared electron pair attracted by both nuclei.
- Explain the properties of covalent molecular substances and giant covalent networks.
- Discriminate between covalent molecules, giant covalent networks and the allotropes of carbon.
- Explain why nanomaterials (1–100 nm) have special properties, and weigh their benefits and risks.
Water boils at 100 °C. Quartz (silicon dioxide), the main mineral in beach sand, does not melt until about 1700 °C. Both are held together by covalent bonds. So why is one a liquid at room temperature and the other one of the hardest common minerals?
The answer is not the strength of the covalent bonds. It is where the covalent bonds are, and what you have to break to melt the substance.
Definition
The covalent bond
A covalent bond is a shared pair of electrons in the region between two nuclei. Both positive nuclei are attracted to the negative shared pair, and that strong electrostatic attraction holds the two atoms together.
Covalent bonds form between non-metal atoms, which share electrons until each has a stable valence shell. A double bond shares two pairs; a triple bond shares three.
A covalent bond in . The shared pair lies between the nuclei, and both nuclei attract it.
Key idea
Two kinds of covalent substance
- A covalent molecular substance is made of separate molecules (, , , ). Inside each molecule, strong covalent bonds. Between molecules, only weak intermolecular forces. Melting or boiling separates the molecules from each other; the covalent bonds do not break.
- A giant covalent network has no separate molecules: every atom is covalently bonded to its neighbours in a continuous lattice (diamond, graphite, silicon dioxide). Melting it means breaking a huge number of strong covalent bonds.
A water molecule. The covalent bonds hold the molecule together; the much weaker attractions between separate molecules are what boiling overcomes.
| Property | Covalent molecular | Giant covalent network |
|---|---|---|
| Examples | Water, carbon dioxide, methane, iodine, sulfur, glucose | Diamond, graphite, silicon dioxide (quartz), silicon carbide |
| Melting point | Low (methane −182 °C, iodine 114 °C): only weak intermolecular forces are overcome | Very high (quartz about 1700 °C; diamond and graphite above 3500 °C): many strong covalent bonds must break |
| Electrical conductivity | None: neutral molecules and no free charged particles | None, except graphite (and graphene), which have delocalised electrons |
| Hardness | Soft, if solid | Very hard (diamond, quartz), except graphite, whose layers slide |
| Solubility in water | Varies: polar molecules such as sugar dissolve; non-polar ones such as iodine barely do | Insoluble |
Iodine, , is a covalent molecular solid that melts at 114 °C. What happens to the particles when it melts?
Common mistake
Melting does not break covalent bonds in molecules
"Water has a low boiling point because its covalent bonds are weak" is wrong twice. The covalent bonds are strong, and they don't break when water boils: steam is still molecules. Boiling overcomes the intermolecular forces between molecules, and those are weak. (You will study these forces in Unit 2.)
Definition
Allotropes
Allotropes are different structural forms of the same element in the same physical state. Carbon has several, and their properties could hardly be more different.
Switch between the structures. For each one, ask: what must break to melt it, and is there anything free to carry a charge?
| Allotrope | Structure and bonding | Properties | Uses |
|---|---|---|---|
| Diamond | Giant 3D network: each C covalently bonded to four others in a tetrahedral arrangement | Hardest natural substance; does not melt at normal pressure (above 3500 °C); no electrical conductivity (all four valence electrons in bonds); conducts heat very well | Cutting tools, drill bits, abrasives, jewellery |
| Graphite | Layers of hexagonal rings: each C bonded to three others; one delocalised electron per C; weak forces between layers | Soft and slippery (layers slide); conducts electricity along the layers; very high melting point | Pencils, lubricants, electrodes, lithium-ion battery anodes |
| Graphene | A single layer of graphite, one atom thick | Extremely strong for its mass, flexible, nearly transparent; excellent conductor of electricity and heat | Experimental sensors, flexible electronics, composites, coatings |
| Fullerenes (, nanotubes) | Closed cages (, a "buckyball" about 1 nm across) or tubes of hexagonal and pentagonal rings; each C bonded to three others | : a molecular solid, soft, low melting compared with diamond, poor conductor. Nanotubes: very strong, and can conduct along the tube | Nanotube composites and electronics; research in drug delivery |
Worked example
Diamond and graphite
Diamond and graphite are both pure carbon.
(a) Explain why both have very high melting points.
(b) Explain why diamond is very hard but graphite is soft enough to use in pencils.
(c) Explain why graphite conducts electricity but diamond does not.
Step 1: Classify both structures
Both are allotropes of carbon and both are giant covalent networks: no separate molecules, every atom covalently bonded to its neighbours.
Step 2: Explain the melting points
To melt either one, a huge number of strong covalent bonds must be broken, which needs a lot of energy.
Step 3: Explain the hardness
In diamond each carbon is bonded to four others in a rigid three-dimensional network, so scratching it means breaking strong bonds in every direction. Graphite is made of flat layers; within a layer the bonds are strong, but between layers there are only weak forces, so the layers slide over each other and rub off onto paper.
Step 4: Explain the conductivity
In diamond all four valence electrons of each carbon are used in bonds, so there are no mobile electrons. In graphite each carbon bonds to three others, and its fourth electron is delocalised across the layer, free to move and carry charge along it.
Try it yourself first, then check the working one step at a time.
Answer
(a) Both are giant covalent networks; melting breaks many strong covalent bonds.
(b) Diamond's bonds hold every atom in a rigid 3D network; graphite's layers are held by weak forces, so they slide.
(c) Graphite has one delocalised electron per carbon that can move along the layers; diamond uses all four valence electrons in bonds, so has none.
Method
Name the structure (giant covalent network) for both.
Compare bonds per carbon: four (diamond) or three plus a delocalised electron (graphite).
Link layers and weak forces between them to softness.
Watch out for
Saying graphite is soft because its covalent bonds are weak. The bonds within the layers are very strong; the forces between layers are weak.
Saying graphite conducts because it is a metal.
Graphite conducts electricity but diamond does not. Which statement explains this?
History
New forms of carbon
In 1985 Harry Kroto, Robert Curl and Richard Smalley found a molecule of 60 carbon atoms shaped like a soccer ball while vaporising graphite with a laser, and named it buckminsterfullerene after the architect of geodesic domes. They shared the 1996 Nobel Prize in Chemistry. In 2004 Andre Geim and Konstantin Novoselov pulled single layers of graphene off graphite with sticky tape and measured their remarkable properties, earning the 2010 Nobel Prize in Physics.
Key idea
Nanomaterials
A nanomaterial has particles (or at least one dimension) between 1 and 100 nanometres across, where . A molecule, a carbon nanotube's width, a sheet of graphene's thickness and the nanoparticles of zinc oxide in a sunscreen are all at this scale.
At this size a material's properties change, for two reasons:
- Surface area to volume ratio. For a cube of side , . Shrinking the particles makes a much larger fraction of the atoms sit on the surface, where reactions happen, so nanoparticles are far more reactive and make excellent catalysts.
- Size-dependent behaviour. Particles smaller than the wavelength of light scatter it differently: zinc oxide and titanium dioxide are white powders, but as nanoparticles they are transparent on skin while still blocking UV. Gold nanoparticles are red, not gold.
Worked example
How much surface does a nanoparticle have?
A catalyst is supplied either as a cube of platinum along each edge, or as the same volume of platinum made into cubes along each edge.
(a) Calculate the surface area to volume ratio of each, in .
(b) Explain why the nanoparticles make a far better catalyst, and state one risk of using them.
Step 1: Convert both lengths to metres
and .
Step 2: Use SA/V = 6/L for a cube
A cube has six faces of area and volume , so .
Step 3: Calculate each ratio
Large cube:
Nanocubes:
Step 4: Link to catalysis
For the same mass of platinum, the nanocubes have times as much surface. Reactions happen at the surface, so far more reactant molecules can meet the catalyst at once, and much less of the expensive metal is needed.
Step 5: State a risk
Nanoparticles are small enough to be breathed in deeply and to pass into cells; if they escape (for example from a worn catalytic converter), their health and environmental effects are not fully known.
Try it yourself first, then check the working one step at a time.
Answer
(a) for the 1.0 cm cube and for the 20 nm cubes, half a million times more. (b) Far more platinum atoms are on the surface where reactions occur, so the catalyst is more active per gram; but released nanoparticles can be inhaled or enter cells, with uncertain effects.
Method
Convert lengths to metres.
For a cube, .
Compare the ratios and link surface area to reactivity.
Watch out for
Converting nm with (that is µm) instead of .
Thinking the total volume changes. It is the same platinum, cut smaller.
| Area | Example | Benefit | Potential risk |
|---|---|---|---|
| Consumer products | Zinc oxide and titanium dioxide nanoparticles in sunscreen; silver nanoparticles in sportswear | Transparent UV protection; antibacterial, odour-resistant fabric | Silver released in washing may harm aquatic microbes; long-term effects of particles absorbed through damaged skin are still studied |
| Health care | Gold nanoparticles in rapid tests; nanoparticle drug carriers; silver wound dressings | Fast diagnosis; drugs delivered to the target cells, so lower doses and fewer side effects | Particles small enough to enter cells may build up in organs; toxicity of new materials is not fully known |
| Transportation | Carbon-nanotube and graphene composites; platinum nanoparticles in catalytic converters | Lighter, stronger vehicles that use less fuel; less precious metal needed per converter | Fine particles released when parts wear or are recycled may be inhaled |
| Energy | Nanostructured electrodes in lithium-ion batteries; nanomaterial solar cells | Faster charging, higher capacity, cheaper or more efficient solar cells | Manufacturing and disposal may release nanoparticles to the environment |
| Agriculture | Nano-fertilisers and nano-encapsulated pesticides | Slow, targeted release, so less chemical is used and less runs off | Nanoparticles could accumulate in soil, water and food chains with unknown effects |
Which particle is in the nanoscale range?
Exam tip
Explaining an allotrope's property
Name the structure, then the bonding, then link it: "Diamond is very hard because it is a giant covalent network in which every carbon atom is bonded to four others by strong covalent bonds in three dimensions, so many strong bonds must be broken to scratch it." For a "consider the benefits and risks" question about nanomaterials, give a specific example, a benefit linked to the small particle size, and a risk linked to the same property.
Summary
A covalent bond is a shared electron pair between two nuclei, held by the attraction of both nuclei.
Covalent molecular substances have strong bonds within molecules but weak forces between them: low melting points, non-conductors.
Giant covalent networks (diamond, silicon dioxide) need many strong covalent bonds broken to melt: very high melting points, hard, non-conductors (except graphite and graphene).
Carbon's allotropes: diamond (4 bonds, 3D, hard, insulator), graphite (3 bonds, layers, soft, conducts), graphene (one layer), fullerenes ( cages, nanotubes).
Nanomaterials (1–100 nm) have a huge surface area to volume ratio and size-dependent properties, with benefits and risks in consumer products, health care, transport, energy and agriculture.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.