Lesson 3 of 6 · 18 min
Ionic lattices and metallic bonding
Model ionic compounds as a lattice of oppositely charged ions and metals as cations in a sea of delocalised electrons, use each model to explain melting point, conductivity, hardness and brittleness, and tell the two apart.
What you will be able to do
- Describe the properties of ionic compounds and metals.
- Explain those properties with the ionic lattice model and the metallic bonding model.
- Discriminate between ionic and metallic bonding.
Tap a crystal of table salt with a hammer and it shatters into smaller cubes. Tap a copper wire and it bends. Both melt only at high temperatures (salt at 801 °C, copper at 1085 °C), so both must be held together by strong forces. Yet one conducts electricity as a solid and the other doesn't.
The difference is in what the particles are and how they are held together.
Key idea
Bonding decides properties
Two questions explain most physical properties:
- What must be overcome to melt or boil the substance? Strong forces throughout the structure mean a high melting point; weak forces mean a low one.
- Are there charged particles that are free to move? A substance conducts electricity only if it does.
Ionic, metallic and covalent substances give different answers, so they have different properties.
Definition
Ionic bonding
Ionic bonding is the strong electrostatic attraction between oppositely charged ions. It forms when metal atoms transfer electrons to non-metal atoms: in , each sodium atom loses one electron to become and each chlorine atom gains one to become .
The ions pack into a crystal lattice: a regular, repeating three-dimensional arrangement in which each ion is surrounded by ions of the opposite charge (six of them in ). There are no separate molecules; the formula gives the 1 : 1 ratio of ions, the formula unit.
Turn the lattice. Count the nearest neighbours of one ion: every one is a ion. Each attraction is strong, and there are millions of them in every direction.
| Property | Explanation from the lattice model |
|---|---|
| High melting and boiling points (NaCl melts at 801 °C) | Melting means overcoming the strong electrostatic attractions between many oppositely charged ions throughout the lattice, which needs a lot of energy. |
| Hard but brittle | The strong attractions resist scratching. But a sharp blow shifts one layer of ions so that ions of the same charge line up; they repel and the crystal splits along that plane. |
| Do not conduct electricity as solids | The ions are held in fixed positions in the lattice, and there are no free electrons. |
| Conduct when molten or dissolved in water | The lattice breaks up, so the ions are free to move and carry charge. |
| Many dissolve in water | Polar water molecules attract the ions out of the lattice. (Some, such as and , are insoluble.) |
Why ionic crystals are brittle. Shifting a layer by one ion lines up like charges, which repel.
Solid sodium chloride does not conduct electricity, but molten sodium chloride does. Why?
Worked example
Why magnesium oxide melts at about 2800 °C
Magnesium oxide, , melts at about 2800 °C; sodium chloride, , melts at 801 °C. Both have the same lattice arrangement.
(a) Explain why magnesium oxide has a high melting point.
(b) Suggest why its melting point is much higher than that of sodium chloride.
(c) Explain why solid magnesium oxide does not conduct electricity but molten magnesium oxide does.
Step 1: Identify the particles and bonding
Magnesium oxide is ionic: a lattice of and ions, each surrounded by ions of the opposite charge.
Step 2: Link bonding to melting point
Melting requires overcoming the strong electrostatic attractions between the oppositely charged ions in every direction throughout the lattice. That needs a great deal of energy, so the melting point is high.
Step 3: Compare the charges
The ions in carry charges of 2+ and 2−; those in are only 1+ and 1−. The attraction between ions increases with their charges (and the and ions are also smaller, so they sit closer together). The attractions in are much stronger, so more energy is needed to melt it.
Electrostatic attraction grows with the size of the charges and as the distance between them shrinks.
Step 4: Explain conductivity
In the solid the ions are held in fixed positions, so no charged particles can move and it does not conduct. When it melts, the lattice breaks down and the ions are free to move and carry charge.
Try it yourself first, then check the working one step at a time.
Answer
(a) is an ionic lattice; melting means overcoming strong electrostatic attractions between many oppositely charged ions, which needs a lot of energy.
(b) Its ions have double the charge (2+ and 2−) of those in and are smaller, so the attractions are much stronger.
(c) In the solid the ions are fixed in the lattice; in the melt they are free to move and carry charge.
Method
Name the particles (ions) and the force (electrostatic attraction).
Link the strength of the force to the energy needed to overcome it.
For conductivity, say whether the charged particles can move.
Watch out for
Saying the covalent bonds in are strong. It is ionic.
Saying molten conducts because of free electrons. Ions carry the charge.
Definition
Metallic bonding
In a metal, each atom releases its valence electrons into the whole structure. Metallic bonding is the electrostatic attraction between a lattice of positive metal ions (cations) and a "sea" of delocalised electrons that move freely among them.
The bonding is non-directional: each cation is attracted to the electrons all around it, not to one particular neighbour.
The cations sit in a regular lattice; the delocalised electrons belong to the whole piece of metal.
| Property | Explanation from the metallic bonding model |
|---|---|
| Conduct electricity as solids and liquids | The delocalised electrons are free to move, so they drift through the metal when a voltage is applied. |
| Good thermal conductors | Mobile delocalised electrons carry kinetic energy quickly through the structure. |
| Malleable and ductile | Layers of cations can slide over each other without breaking the bonding, because the delocalised electrons move with them and keep attracting every cation. |
| Usually high melting and boiling points | Strong attraction between the cations and the delocalised electrons must be overcome. It is stronger with more delocalised electrons per atom and smaller, more highly charged cations, so melting points vary (sodium 98 °C, iron 1538 °C, tungsten 3422 °C). |
| Shiny (lustrous) | The delocalised electrons absorb and re-emit light at the surface. |
Ionic bonding
- Between a metal and a non-metal.
- Electrons are transferred, forming cations and anions.
- Attraction between oppositely charged ions.
- Solid: does not conduct (ions fixed). Molten or in solution: conducts by moving ions.
- Brittle: a shift lines up like charges.
Metallic bonding
- Between metal atoms only.
- Valence electrons are delocalised across the structure.
- Attraction between cations and delocalised electrons.
- Solid and liquid: conducts by moving electrons.
- Malleable: layers slide and the electron sea keeps them bonded.
Select all the statements that are true of metallic bonding.
Worked example
Telling ionic from metallic from data
Two white or silvery solids, P and Q, were tested.
| Property | P | Q |
|---|---|---|
| Melting point (°C) | 660 | 770 |
| Conducts as a solid | yes | no |
| Conducts when molten | yes | yes |
| Effect of hammering | flattens | shatters |
Determine the type of bonding in each solid, giving reasons.
Step 1: Note what the data share
Both have high melting points, so both have strong forces throughout the structure. Melting point alone can't separate them.
Step 2: Use conductivity as a solid
P conducts as a solid, so it has charged particles free to move in the solid: delocalised electrons. Q does not conduct as a solid but does when molten, so its charged particles are fixed in the solid and free in the liquid: ions.
Only metals (and graphite) have mobile charge carriers in the solid. Ions become mobile only when the lattice breaks down.
Step 3: Use the mechanical properties
P flattens (malleable): layers of cations slide while the electron sea keeps them bonded. Q shatters (brittle): shifting a layer lines up like charges, which repel.
Try it yourself first, then check the working one step at a time.
Answer
P is metallic (conducts as a solid and liquid by delocalised electrons; malleable). Q is ionic (conducts only when molten, as its ions become free to move; brittle). P fits aluminium and Q potassium chloride.
Method
Use conductivity of the solid first.
Confirm with conductivity of the liquid and with malleability or brittleness.
Watch out for
Deciding from melting point alone.
Saying Q conducts when molten because of free electrons.
Common mistake
"Ionic compounds conduct because they contain ions"
Containing charged particles is not enough: they must be free to move. Solid sodium chloride is full of ions and is an insulator. Write "the ions are fixed in the lattice" for the solid, and "the ions are free to move" for the molten compound or solution.
And don't say molten salt conducts by "free electrons": ionic compounds in any state conduct by moving ions. Only metals (and graphite) conduct by delocalised electrons.
Exam tip
The three-link explanation
Markers look for the particles, the force, and the link to the property. For example: "Magnesium oxide has a high melting point because it is a lattice of and ions held by strong electrostatic attractions in every direction, so a large amount of energy is needed to overcome them."
Summary
Ionic compounds are lattices of oppositely charged ions held by strong electrostatic attraction: high melting points, hard but brittle, and conductors only when molten or dissolved (mobile ions).
Metals are lattices of cations in a sea of delocalised electrons: conductors as solids and liquids, malleable and ductile, usually high melting.
Ionic bonding: transferred electrons, attraction between ions, metal with non-metal. Metallic bonding: delocalised electrons, attraction between cations and the electron sea, metal atoms only.
A substance conducts only if it has charged particles free to move.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.