Lesson 1 of 6 · 18 min

Pure substances and mixtures

Sort matter into elements, compounds and mixtures, tell homogeneous from heterogeneous mixtures, and use melting point and density data to identify substances and judge purity.

What you will be able to do

  • State that a pure substance is either an element or a compound.
  • Discriminate between homogeneous and heterogeneous mixtures.
  • Use melting behaviour and density (ρ=mV\rho = \frac{m}{V}) to identify a pure substance and to recognise a mixture.
  • Explain how impurities change the physical and chemical properties of a substance.

A jeweller is handed a gold-coloured ring and asked, "Is it pure gold?" Colour won't settle it: brass and gold-plated metals look the same. But pure gold has a density of 19.3 g cm−319.3\ \mathrm{g\,cm^{-3}} and melts at exactly 1064 °C, every time. A mixture of metals doesn't.

That is the central idea of this lesson. Pure substances have fixed, measurable properties; mixtures have properties that depend on what is in them, and in what amounts.

Definition

Pure substances

A pure substance has a fixed composition and its own distinct properties. Every pure substance is either:

  • an element: only one kind of atom, such as copper (Cu\ce{Cu}), oxygen (OX2\ce{O2}) or diamond (C\ce{C}); or
  • a compound: two or more elements chemically bonded in a fixed ratio, such as water (HX2O\ce{H2O}), sodium chloride (NaCl\ce{NaCl}) or carbon dioxide (COX2\ce{CO2}).

A mixture contains two or more substances that are not chemically bonded to each other. Its composition can vary, and each part keeps its own properties.

Classifying matter. Only the pure substances have fixed melting points and densities.

Homogeneous and heterogeneous mixtures.
FeatureHomogeneous mixtureHeterogeneous mixture
CompositionUniform throughout; every sample is the sameVaries from place to place
PhasesOne phase: you cannot see separate parts, even with a microscopeTwo or more phases or visible parts
ExamplesSalt water, sugar in water, air, brass, stainless steel, vinegarSand and water, oil and water, granite, iron filings with sulfur, muddy water
Also calledA solution (a solid solution for an alloy)—

Which of these is a homogeneous mixture?

Choose one answer

Key idea

Pure substances have fixed properties; mixtures don't

  • A pure substance has a sharp melting point and a fixed boiling point (at a given pressure), a fixed density at a given temperature, and the same reactivity, strength and colour in every sample.
  • A mixture's properties depend on which substances it contains and how much of each. A mixture usually melts over a range of temperatures, and its density lies between those of its components.

Salt water shows both effects: it boils above 100 °C and freezes below 0 °C, and the more salt you dissolve, the further its boiling and freezing points move from water's.

Heating curves. A pure substance melts at one temperature (a flat section). A mixture melts over a range, lower than the pure substance.

Worked example

Using melting data to judge purity

  • Simple familiar
  • Technology free

Pure benzoic acid melts at 122 °C. Two students each made a sample of benzoic acid and measured its melting behaviour.

SampleStarted to meltFully melted
A121.5 °C122.5 °C
B113 °C119 °C

Determine which sample is pure and which contains impurities. Justify your answer.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Compare each melting range with the pure substance's melting point.

  2. Sharp and at the accepted value: pure. Lower and over a range: impure.

Watch out for

  • Saying B is pure because it still melts at a definite temperature. A mixture also melts, but over a range.

  • Forgetting to quote the data in the justification.

Definition

Density

Density is the mass of a substance per unit volume:

ρ=mV\rho = \frac{m}{V}

In the laboratory, mass is in grams and volume in cm3\mathrm{cm^3} or mL (1 mL=1 cm31\ \mathrm{mL} = 1\ \mathrm{cm^3}), so density is in g cm−3\mathrm{g\,cm^{-3}}. Find the volume of an irregular solid by displacement: the rise in water level in a measuring cylinder when the solid is lowered in.

Densities of some pure substances at 25 °C (g cm−3\mathrm{g\,cm^{-3}}).
SubstanceDensitySubstanceDensity
Gold19.3Iron7.87
Lead11.3Zinc7.14
Silver10.5Aluminium2.70
Copper8.96Magnesium1.74
Nickel8.91Water1.00
Interactive

Mass against volume for samples of one metal

Six pieces of the same metal, of different sizes. Because m=ρVm = \rho V, the gradient of the line is the density. Which metal in the table is it?

The line of best fit for the six samples above has a gradient of 2.70 g cm−32.70\ \mathrm{g\,cm^{-3}} and passes very close to the origin. Which metal are the samples made of?

Worked example

Is the ring pure gold?

  • Complex familiar
  • Technology active

A seller claims a ring is pure gold (density 19.3 g cm−319.3\ \mathrm{g\,cm^{-3}}). The ring has a mass of 12.6 g12.6\ \mathrm{g}. When it is lowered into a 10 mL measuring cylinder, the water level rises from 5.0 mL5.0\ \mathrm{mL} to 5.8 mL5.8\ \mathrm{mL}. Each reading has an uncertainty of ±0.05 mL\pm 0.05\ \mathrm{mL}.

Calculate the density of the ring and evaluate the seller's claim.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Volume by displacement: final level minus initial level.

  2. ρ=mV\rho = \frac{m}{V}.

  3. Work out the range of possible densities from the uncertainty.

  4. Compare that range with the accepted value before judging.

Watch out for

  • Using the final water level (5.8 mL) as the ring's volume.

  • Writing the volume as 0.80 mL. The readings give 0.8 mL, one significant figure; adding a zero claims a precision you do not have.

  • Judging the claim without considering the measurement uncertainty.

A student lowers an 80.1 g piece of metal into a measuring cylinder. The water level rises from 40.0 mL to 50.2 mL. Calculate the density of the metal, to three significant figures.

in g cm -3

Give 3 significant figures.

Note

Impurities change properties

An impurity is an unwanted substance mixed into a substance. Even a small amount matters:

  • Physical properties. Impurities usually lower the melting point and make it melt over a range. That is why chemists use a melting point to check the purity of a product, and why salt spread on icy roads melts the ice below 0 °C.
  • Chemical properties. Impurities can cause unwanted side reactions or slow the wanted one. Sulfur compounds in the feed gases "poison" the iron catalyst used to make ammonia, so the gases are purified first. A drug contaminated by a by-product can be less effective or harmful, so medicines must meet strict purity standards.

Sometimes "impurities" are added on purpose. A little carbon turns soft iron into much harder steel.

Common mistake

Compounds are not mixtures of elements

Water is not "a mixture of hydrogen and oxygen". In a compound the elements are chemically bonded in a fixed ratio, and the compound has new properties: hydrogen and oxygen are gases that explode together, while water puts out fires. Separating a compound into its elements needs a chemical reaction (such as electrolysis); separating a mixture needs only a physical method.

Exam tip

Using data to decide "pure or mixture"

State the evidence, then the conclusion: "The sample melted over a range, 72–78 °C, below the 80 °C melting point of the pure compound, so it is impure (a mixture)." For density, compare your calculated value with the data-book or table value, and allow for the uncertainty in your measurements before you decide.

Summary

  • Pure substances are elements (one kind of atom) or compounds (elements chemically bonded in a fixed ratio).

  • Mixtures are not chemically bonded and can vary in composition. Homogeneous mixtures are uniform (solutions, alloys, air); heterogeneous mixtures have visible parts.

  • Pure substances have fixed, measurable properties: a sharp melting point, a fixed boiling point and density. A mixture's properties depend on its components and their amounts.

  • ρ=mV\rho = \frac{m}{V}; find an irregular volume by displacement. On a mass–volume graph the gradient is the density.

  • Impurities lower and widen the melting range and can cause unwanted or inefficient reactions.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 1 of 60% read

Save your progress with a free account