QCAA Biology IAs Explained: IA1, IA2 and IA3 (2025 Syllabus)

The data test, the student experiment and the research investigation, worked through for Biology: what each is worth, how field sampling and standard error earn marks, and what QCAA's latest reports say costs them.

Jackson Wright34 min read
A square quadrat frame lying on pale ground among small plants, one of them coral, beside three cards: a column graph with error bars and a coral bar, a Punnett square grid with one coral cell, and a double helix with one coral strand
On this page

Every QCAA Biology student sits the same three kinds of internal assessment: a 10-mark data test, a 20-mark student experiment and a 20-mark research investigation. They use the same criteria as the other 2025 sciences, but Biology changes what top-band work looks like. Your data come from quadrats, transects and traps, where most of the variation is in the organisms rather than the instrument, so uncertainty means standard deviation, standard error and p-values. Your diversity index is only as good as the way you placed and counted your quadrats. And a claim about gene technology has to become an inheritance pattern or an allele frequency someone has measured.

This guide is for Year 12s starting Units 3 and 4 in Term 1 2027. It works through each IA under the current Biology 2025 syllabus (v1.3, January 2026): the conditions, the marks and criteria, what the top band looks like in Biology, and what QCAA's latest reports say students and schools get wrong. For the skills every science shares, such as the three-part structure of a justified modification or the return to the claim, it links to our student experiment guide and research investigation guide rather than repeating them.

The three Biology IAs at a glance

Internal assessment is 50 of your 100 marks. The external exam is the other 50.

TaskMarks and conditions
IA1 Data test, Unit 310 marks, one criterion. 60 minutes plus 5 minutes perusal, supervised, unseen data, calculator allowed
IA2 Student experiment, Unit 320 marks, four criteria of 5. About 10 hours of class time, up to 2000 words or 11 minutes
IA3 Research investigation, Unit 420 marks, four criteria of 5. About 10 hours of class time, up to 2000 words or 11 minutes
External exam, Units 3 and 450 marks. Two papers, each 90 minutes plus 5 minutes perusal

Unit 3, Biodiversity and the interconnectedness of life, has two topics. Biodiversity and populations covers classification, sampling, diversity indices, the Lincoln index and population growth. Functioning ecosystems and succession covers energy flow, nutrient cycles, species interactions, keystone species, carrying capacity and succession. Unit 4, Heredity and continuity of life, covers genetics and heredity, from DNA replication and protein synthesis to Punnett squares, pedigrees and DNA profiling, then the continuity of life on Earth: natural selection, allele frequencies, speciation and phylogeny. IA1 and IA2 draw on Unit 3. IA3 draws on Unit 4. To see how the four results combine, use the subject result calculator.

When each IA falls in 2027

Your school sets the exact dates, and your task sheet is the authority. QCAA's Senior Education Profile calendar sets the deadlines schools work back from.

  1. 27 January

    Term 1 starts and Unit 3 begins. The fieldwork and practicals you do in these weeks are the source of the IA1 data and the base for IA2.

  2. Term 1

    The data test. Schools must enter provisional marks for the first internal assessment by Tuesday 13 April 2027, so expect IA1 in Term 1.

  3. Terms 1 and 2

    The student experiment, usually with checkpoints for your modification, your data and a draft. Schools that opt in to QCAA's second confirmation event must enter IA2 provisional marks by Tuesday 8 June 2027. Other schools submit them with the remaining internal assessments on Tuesday 17 August 2027.

  4. Terms 2 and 3

    The research investigation on Unit 4. Provisional marks for the remaining internal assessments, including IA3, are due on Tuesday 17 August 2027.

  5. 25 Oct to 16 Nov

    The external assessment block. QCAA sets the day of the Biology papers.

For how the whole cycle runs from task sheet to submission, see the internal assessment timeline.

IA1: the data test

The data test gives you tables and graphs from Unit 3 ecology you have not seen before, and asks you to calculate from them, find the patterns in them and draw conclusions from them. It is the only internal assessment sat under exam conditions.

About 30% of the marks go to working out unknown quantities or features of a dataset, about 30% to identifying trends, patterns, relationships, limitations or uncertainty, and about 40% to drawing conclusions based on analysis. In Biology, that means estimating a population with the Lincoln index, calculating Simpson's diversity index or percentage cover from quadrat counts, working out net primary productivity or the efficiency of energy transfer, classifying vegetation with Specht's system, and deciding what the data says about a species' distribution or an ecosystem's carrying capacity.

Biology has no formula book. The syllabus states two formulas in the Unit 3 subject matter, and you should know both:

  • Lincoln index: N = (M × n) ÷ m, where M is the number marked in the first capture, n the number caught in the second, and m the number of marked animals in the second.
  • Simpson's diversity index: SDI = 1 − Σn(n − 1) ÷ N(N − 1), where n is the number of one species and N the total of all species.

QCAA's own sample data test has 9 questions worth 20 marks across three datasets: butterflies trapped in the canopy and understorey of a rainforest near Cairns, with a p-value for each species; tree heights and canopy cover along two 100-metre transects, to be classified with Specht's table; and an energy-flow diagram. The sample printed the SDI formula in the question. Don't count on yours doing the same.

How the data test is marked

There are no criteria to balance. Your raw score on the paper becomes a percentage, and the percentage becomes a mark out of 10 through fixed cut-offs. The top mark needs "consistent demonstration, across a range of scenarios", and more than 90% of the paper.

Your raw scoreIA1 mark
More than 90%10
More than 80%9
More than 70%8
More than 60%7
More than 50%6
More than 40%5
More than 30%4
More than 20%3
More than 10%2
More than 1%1
1% or less0

Read "more than" literally. On a 20-mark paper like QCAA's sample, 18 out of 20 is exactly 90%, which is not more than 90%, so it earns 9. QCAA's 2025 report gives schools the other side of the same rule: 14 out of 23 is 60.9%, which is more than 60%, so it earns 7. One raw mark can be one IA mark.

What full-marks answers do

  • Give the conclusion and the reason. QCAA's 2026 endorsement report tells schools that a 2-mark infer question gives 1 mark for the conclusion and 1 for the reasoning, and a 2-mark compare question 1 for a similarity and 1 for the differences. QCAA's sample contrast answer quotes the numbers in both halves: 18 against 9 in the canopy, 21 against 3 in the understorey.
  • Read p-values as chance. A p-value is the probability of a difference at least this large if there were no real difference, and by convention a value below 0.05 counts as significant. QCAA's sample answer concludes that the species with the largest p-value, p < 0.08, is the one whose difference is most likely due to chance.
  • Find limitations in the data. QCAA's 2025 report praised school-written data tests whose limitation questions "were based on evidence in the data, not the methodology". Point to something on the page, such as one quadrat per distance, few recaptures or a wide spread in repeats.
  • Show every step. QCAA's sample scheme gives separate marks for calculating N, substituting into the formula and the final SDI, then allows follow-through into the next question, so one slip costs one mark.

Here is a two-mark item of the kind you will meet, with an invented dataset. Students placed a 1 m × 1 m quadrat every 10 m along a belt transect from a creek bank to a ridge, and recorded soil moisture and the percentage cover of two ground-layer species.

Distance (m)Soil moisture (%)Species A cover (%)Species B cover (%)
038623
10314512
20222130
3014941
409455

The question: Infer how soil moisture affects the distribution of species A. Justify your response.

1 of 2 marks

"Species A is limited by soil moisture, because plants near a creek get more water."

2 of 2 marks

"Species A's distribution appears to be limited by soil moisture. Its cover fell at every step along the transect as soil moisture fell, from 62% at 0 m, where soil moisture was 38%, to 4% at 40 m, where it was 9%."

Both reach the same inference. The first justifies it with a general idea about creeks and never touches the data. The second quotes the trend and the values at each end. If the next item asks for a limitation, the data gives you one: a single quadrat at each distance gives no measure of spread. Our guide to what QCAA's cognitive verbs ask for covers the other verbs on the paper.

Simpson's index and the Lincoln index, step by step

Calculation items are where Biology marks leak. Here is the working for two short items on invented data. A 1 m2 quadrat contained 12 plants of species A, 5 of B, 2 of C and 1 of D. In a separate study, 40 skinks were caught, marked and released. A week later, 36 were caught, and 8 of them carried a mark.

N = 12 + 5 + 2 + 1 = 20. Σn(n − 1) = (12 × 11) + (5 × 4) + (2 × 1) + (1 × 0) = 132 + 20 + 2 + 0 = 154, and N(N − 1) = 20 × 19 = 380. SDI = 1 − 154 ÷ 380 = 1 − 0.405 = 0.59. The SDI is the probability that two individuals chosen at random belong to different species, so the probability that they are the same species is 1 − 0.59 = 0.41. For the skinks, N = (40 × 36) ÷ 8 = 180. With only 8 recaptures, one more or one fewer changes the estimate from 160 to about 206, so the estimate is uncertain.

Why this scores: N is calculated before it is used, every term of the sum is shown, and the SDI is rounded only at the end, to the two decimal places QCAA's sample asks for. The probability step uses the meaning of the index in QCAA's sample marking scheme. The last line finds the limitation in the data itself, the size of m, not in a general worry about tags falling off.

How IA1 prepares you for the external exam

The data test is assessed on three of the external exam's four objectives. The exam adds describing, widens the scope to Units 3 and 4 across two 90-minute papers, and has no formula book either, as our guide to QCAA formula sheets explains. QCAA's 2025 subject report, on the last exam set under the 2019 syllabus, said students did well when they interpreted ecological field data, inferred whether a population had reached carrying capacity, applied the Lincoln index and predicted a population size from quadrat data: the data test's skills. It recommended that teachers make sure students use terms that sound alike correctly, such as "population growth" and "population growth rate", and give them more practice at rearranging equations, calculating percentages and finding ratios. That advice was written for teachers, but it is your revision list too. Its multi-step example, an average annual population growth rate, rewarded full working.

IA2: the student experiment

You modify, which means refine, extend or redirect, an experiment relevant to Unit 3 to address your own related hypothesis or question. The base is a practical or simulation performed in class.

  • Forming5 marks
  • Finding5 marks
  • Analysing5 marks
  • Interpreting and Evaluating5 marks

Start from a Unit 3 practical about biodiversity or ecosystems

QCAA's sample task lists the syllabus's suggested investigations as the class practicals you might modify: stratified sampling of an ecosystem's strata, how abiotic factors affect the distribution or abundance of species, species composition along an environmental gradient, species diversity in two ecosystems of the same classification, species interactions from correlation in abundance data, competitive exclusion through vertical zonation on a tree, and factors affecting carrying capacity. The syllabus expects about five hours of fieldwork, and most of those listed practicals are field sampling, so expect your IA2 to start outdoors.

The trap is a familiar practical from another unit. Enzyme activity and osmosis are Unit 1, so in General Biology a catalase or osmosis experiment is not a valid IA2. QCAA's 2025 report told schools that a Unit 3 research question should investigate biodiversity or ecosystem dynamics, and that an experiment on abiotic factors and plants needs clear links to concepts such as carrying capacity, population growth or species distribution. Its May 2026 endorsement report repeats the point.

Forming: a specific question and a justified modification

The top band of Forming asks for "a considered rationale for the experiment", "justified modifications to the methodology", "a specific and relevant research question", "a methodology that enables the collection of sufficient and relevant data", and "appropriate use of genre and referencing conventions". QCAA's 2025 report says a considered rationale explains the relevance of the independent and dependent variables, and justified modifications explain how each one will improve the reliability or validity of the evidence.

Take an invented example. In class, groups compared two areas of the same open-forest reserve with five random 1 m × 1 m quadrats each and one SDI per area. Part of the reserve was burnt in a planned hazard-reduction burn 14 months ago, so redirecting the practical to time since fire makes it a question about secondary succession.

Relevant, not specific

"Does fire affect biodiversity?"

Specific and relevant

"How does the mean Simpson's diversity index of ground-layer plants in 1 m × 1 m quadrats differ between a section of open-forest burnt 14 months ago and an adjoining section unburnt for at least eight years?"

The second defines the independent variable as two conditions, names the dependent variable and how it is measured, and fixes the stratum, quadrat size and ecosystem. The rationale can then predict from Unit 3: fire removes the dominant ground cover, which reduces competition and lets pioneer species colonise the gaps, so evenness and SDI should be higher in the burnt section.

The modification is where most of Forming is decided. Our student experiment guide explains the general rule: name the limitation, the change and what the change makes possible. In fieldwork, the strongest justifications are about sampling, because the syllabus lists the strategies that minimise bias: the size and number of samples, random-number generators, counting criteria and calibrating equipment.

Feasible

"We used 12 quadrats in each section instead of 5, and compared a burnt and an unburnt section."

Justified

"The class method pooled five quadrats into one SDI per area, so the difference between 0.71 and 0.64 had no measure of spread and could not be tested. This method calculates an SDI for each quadrat, which gives a mean, a standard error and a Student's t-test. Twelve quadrats per section were used because, in a 15-quadrat pilot, the running mean of species per quadrat stopped changing by more than 5% after the ninth. Positions come from random-number coordinates in a 50 m × 50 m plot in each section, and any position within 2 m of a track is redrawn, so neither the recorder's choice nor disturbance at the track edge biases the sample. A tussock counts as one individual, and a plant counts only if it is rooted inside the frame, so every recorder counts the same way."

Each change comes with its reason. The running mean is the Biology-specific move: it shows the number of quadrats was chosen from data, which is what "a methodology that enables the collection of sufficient and relevant data" asks for.

Finding: fieldwork risks, ethics and raw data

The top band of Finding asks for "considered management of risks/ethical issues/environmental issues", "collection of sufficient and relevant raw data", and "fluent and concise use of scientific language and representations". QCAA's 2025 report describes considered management as "careful and deliberate management of factors specific to the investigation", such as adherence to ethical and cultural guidelines. In fieldwork, the environmental issue is the site you are sampling.

Fire-damaged trees can drop limbs without warning, so the burnt plot was positioned with the reserve ranger in a part of the section without standing dead trees, rather than skipping quadrats that landed near them, which would have biased the sample. Ticks are common in long grass, so long sleeves and trousers tucked into socks were worn and skin was checked after each session. Seedlings are regenerating in the burnt section, so recorders walked to each quadrat along one marked line and knelt outside the frame to limit trampling. No plants were removed. Unknown species were photographed in the frame and identified later from the photos with a regional field guide. The reserve's managers gave permission for the sampling, and because the area is also cared for by its Traditional Owners, the school asked how they would like the site and their fire knowledge to be acknowledged.

Why this scores: each strategy is specific to this site and comes with its reason, and the first protects the sample as well as the people. The same precautions without reasons describe management, the 2–3 band. Unit 3 includes First Nations peoples' knowledge of land management that holds ecosystems at particular stages of succession, so the cultural protocol is relevant to the science as well as the ethics.

The other two lines of Finding are lost by omission. Show the raw counts for every quadrat, not just each section's mean. Italicise species names, as QCAA's report shows with "Rhizophora stylosa" or "R. stylosa", and use the field vocabulary it rewards, such as "abundance", "distribution", "gradient", "strata" and "substrate". If you use historical data, the report notes that responses had sufficient data when the student's own primary data was in the analysis too.

Analysing: standard error, t-tests and the pattern in the spread

  1. 4–5

    correct and thorough

    correct and relevant processing of data; thorough identification of relevant trends/patterns/relationships; thorough and appropriate identification of the uncertainty and limitations of evidence

  2. 2–3

    basic and obvious

    basic processing of data; identification of obvious trends/patterns/relationships; basic identification of uncertainty and/or limitations of evidence

  3. 1

    incorrect or insufficient

    incorrect or irrelevant processing of data; identification of incorrect or irrelevant trends/patterns/relationships; incorrect or insufficient identification of uncertainty and limitations of evidence.

The syllabus splits the tools by design. A comparative investigation, like the fire example, uses the mean, standard deviation, standard error and Student's t-test. A correlational one, like a transect along a gradient, uses regression, Pearson's correlation coefficient or Spearman's rank. QCAA's 2025 report also praised segmented bars or pie charts for species evenness, and profile diagrams or maps for distribution patterns.

Standard deviation

How spread out the individual values are around their mean. In field data, most of it is biological variation between quadrats.

Standard error

The standard deviation divided by the square root of the number of values, such as quadrats. It estimates how far the mean itself might be from the true mean, and it is what error bars on a comparison usually show.

Student's t-test

A test of whether two means differ by more than chance would explain. It gives a p-value: below 0.05 is the usual threshold for a significant difference.

Confounding factor

Something other than the independent variable that also differs between your conditions and could produce the same result.

The report's example of thorough identification is "identifying patterns in uncertainty data, rather than simply restating standard error values". Here is what that looks like with the invented fire data.

Ground-layer diversity was higher in the burnt section (Figure 2). Mean SDI was 0.75 ± 0.01 in the burnt section and 0.60 ± 0.03 in the unburnt section (mean ± standard error, 12 quadrats each), and the error bars do not overlap. A Student's t-test gave t = 4.65 with 22 degrees of freedom and p < 0.001, so a difference this large is very unlikely if the two sections were equally diverse. The spread was not equal: the standard deviation in the unburnt section (0.105) was nearly three times that in the burnt section (0.038), and most of it came from two quadrats, with SDIs of 0.42 and 0.38, that were dominated by a single tussock grass. Without those two quadrats, the unburnt mean is 0.64, still well below the burnt mean, so the difference does not depend on them. Their values suggest the dominant grass is clumped in the unburnt section, which random quadrats sample unevenly.

Why this scores: the comparison is tested, not eyeballed, and the uncertainty is read for what it shows: where the spread comes from, whether the result survives without the extreme values, and what the pattern says about distribution, a Unit 3 idea. That is the step from "basic identification of uncertainty" to "thorough and appropriate".

The limitation that matters most is design. There is one burnt section and one unburnt section, so the 12 quadrats are replicates of a section, not of fire, and any other difference between the sections, such as soil, slope or past grazing, is a confounding factor. QCAA's report lists the limitations it rewards: outliers, the number of data points, the spread of data, missing data, extraneous variables and confounding factors.

Its 2019 predecessor, Analysis of evidence, was marked down for 4.26% of schools (19 of 446) in the 2025 confirmation of IA2. More on that below.

Interpreting and Evaluating: reliable is not the same as valid

The top band needs "justified conclusion/s linked to the research question", a "justified discussion of the reliability and validity of the experimental process", and "suggested improvements and extensions to the experiment that are logically derived from the analysis of evidence". The middle band accepts reliability and/or validity, and improvements and/or extensions. The top band needs both halves of each.

QCAA's 2025 report tells teachers what each half means. Reliability is how the design or data collection affects "the extent to which another experimenter will obtain the same results", argued from evidence such as patterns in uncertainty data. Validity links to the purpose in the rationale and asks whether the experiment "measured what was intended". Improvements then address what affected reliability, and extensions what affected validity.

In the fire example, the conclusion answers the question as asked: 14 months after the burn, ground-layer diversity in this reserve was higher in the burnt section, with a mean SDI of 0.75 against 0.60, consistent with early secondary succession. The burnt data are reliable: the quadrats agreed closely, with a standard deviation of 0.038. The unburnt data are less so, because another group's random quadrats could land on more or fewer grass clumps. The improvement comes from the analysis: standard error falls with the square root of the number of quadrats, so halving the unburnt standard error, from 0.03 to about 0.015, needs four times as many quadrats, 48 rather than 12.

Validity is the bigger problem. The purpose was the effect of fire, but with one section of each kind, the method cannot separate fire from everything else that differs between them. The extension follows: sample paired plots across several burn boundaries, or sections burnt 1, 3 and 6 years ago, to place the result along the course of succession. More quadrats in the same two sections would help reliability but not validity, because they cannot remove a confounding factor.

IA3: the research investigation

You gather evidence related to a research question to evaluate a claim relevant to Unit 4. Your teacher provides a list of claims. QCAA's sample instrument offers four: "Gene therapy can reverse ageing", "DNA testing can prove genealogical ancestry", "Transgenic organisms offer a viable and effective future for human health" and "Sustainable reserve size should be based on the data from gene pool variability".

  • Forming and Finding5 marks
  • Analysing5 marks
  • Interpreting5 marks
  • Evaluating5 marks

Genre and referencing conventions are marked in Forming and Finding, and use of scientific language/representations in Interpreting. For referencing, see our guide to referencing and using sources.

From claim to a Unit 4 research question

The top band of Forming and Finding asks for "a considered rationale identifying clear development of the research question from the claim" and "a specific and relevant research question". QCAA's 2025 report describes a specific and relevant question as linked to the claim, requiring Unit 4 concepts and reflecting the evidence collected. Our research investigation guide works through QCAA's cheetah reserve example. Here is the same move in another Unit 4 context, with an invented claim: "Gene drives will eliminate malaria-carrying mosquitoes."

As broad as the claim

"Can gene drives stop malaria?"

Specific and relevant

"How do the inheritance rate and allele frequency of a CRISPR–Cas9 gene drive that disrupts a female fertility gene in the mosquito Anopheles gambiae change over successive generations in caged populations?"

The rationale turns the claim into Unit 4 genetics. A Punnett square for a heterozygous carrier crossed with a wild-type mosquito predicts that half the offspring inherit the allele. A homing gene drive breaks that rule: in the carrier's germline, Cas9 cuts the matching site on the wild-type chromosome and the cell repairs the cut by copying the drive across, so most offspring inherit it. The drive disrupts a fertility gene, so it acts as a recessive allele: heterozygous females are fertile, homozygous females sterile. "Eliminate" becomes whether the drive spreads until too few fertile females remain. That path, from claim to inheritance pattern to a measurable allele frequency, is what "clear development of the research question from the claim" looks like.

Analysing: check what each source measured

The top band of Analysing asks for "the identification of sufficient and relevant evidence", "thorough identification of relevant trends/patterns/relationships in evidence", and "thorough and appropriate identification of limitations of evidence". QCAA's 2025 report, advising teachers on marking, describes relevant evidence as referenced tables and graphs from the sources, in a logical order, and sufficient evidence as enough sources that the limitations of one can be addressed by another.

In genetics, two sources can report "the drive's frequency" and mean different things. Suppose, with invented numbers, a cage of 500 mosquitoes holds 180 homozygous drive carriers, 240 heterozygotes and 80 wild-type mosquitoes. One source might report that 84% carry the drive, because 420 of 500 have at least one copy. Another might report an allele frequency of 0.60, because the drive is (2 × 180 + 240) = 600 of the cage's 1000 alleles. Same cage. Calculating allele frequency from genotype data is Unit 4 subject matter, so convert before you compare.

Do the same with inheritance rates: if a source reports that 96% of a carrier's offspring inherited the drive, set it against the 50% the Punnett square predicts. A source may test that difference with a chi-square or binomial test. Neither is in the syllabus, so you don't calculate one, but you read its p-value as you did in the data test. Then record each source's limitations: how many mosquitoes and generations, small cages, large cages or the field, and whether anyone sequenced the target site to look for resistance. QCAA's report tells teachers that a thorough limitation says how or why it makes the evidence less effective for the research question.

Interpreting: argue from the mechanism

Interpreting needs "justified scientific argument/s", a "justified conclusion linked to the research question", and "fluent and concise use of scientific language/representations". In Biology, that means explaining the trend in your evidence with its mechanism.

If your sources agree that drive frequency rose and caged populations collapsed, the argument is biased inheritance: the drive reaches most offspring rather than half, so it rises in frequency even though natural selection acts against it, because homozygous females leave no offspring. If some sources report resistance, the argument is selection again. When the cut is repaired by joining the broken ends instead of copying the drive, the target site can mutate so the drive can no longer cut it. If that allele still lets the fertility gene work, females carrying it stay fertile, selection favours it, and the drive stalls.

Precision is part of the mark. QCAA's 2025 report singles out "gene" against "allele": the drive is an allele of the fertility gene, not a new gene. Write "allele frequency of 0.60", not "60% of mosquitoes", when you mean the allele.

Evaluating: judge the evidence, then return to the claim

Its 2019 predecessor, Conclusion and evaluation, was the criterion QCAA most often marked down when it checked schools' IA3 marks in 2025, at 5.37% of schools (24 of 447, for the reason below). Here is the top band.

  1. 4–5

    justified and extrapolated

    justified discussion of the quality of evidence; extrapolation of credible findings of the research to the claim; suggested improvements and extensions to the investigation that are considered and relevant to the claim

The 2–3 band asks only for a "reasonable description of the quality of evidence", "application of relevant findings of the research to the claim", and improvements and/or extensions.

QCAA's 2025 report says strong discussions of quality weigh how well the evidence addresses the research question and the claim, and how far limitations "such as bias, currency, relevance, or missing data" affect it. So "all four sources were peer-reviewed journals" is not yet a discussion of quality. "All four sources used caged populations of a few hundred mosquitoes, so none can show whether resistance would arise in a wild population of millions" is.

Then go back to the claim. Cage findings can support its mechanism: a drive can spread faster than Mendelian inheritance allows and suppress a caged population. They cannot show "eliminate" in the wild, where populations are larger, spread across many sites and connected by gene flow, and "malaria-carrying mosquitoes" covers more than one species. Saying where your findings stop is extrapolation. QCAA's report describes considered improvements and extensions as ways to obtain more valid or reliable evidence applicable to the claim. Here, an extension might investigate whether a drive can spread into a closely related Anopheles species through interbreeding, the part of the claim your question left out. Our research investigation guide explains why the conclusion to the research question and the return to the claim are separate jobs.

What QCAA's 2025 and 2026 reports flag

QCAA's Biology subject report: 2025 cohort, published in January 2026, reviewed the last cohort assessed in Units 3 and 4 under the 2019 syllabus. Its criterion names are the old ones, but it also lists the key differences for the 2025 syllabus, which is the one you will be marked against. When QCAA checked schools' marks through confirmation, it agreed with the IA1 marks of all 447 schools. In IA2 and IA3, it lowered some criteria at more schools than others. The figures below are percentages of schools, not of individual students' responses.

Criterion (2019 name)Schools marked downClosest 2025 criterion
IA2 Research and planning4.71% (21 of 446)Forming, plus risks and data in Finding
IA2 Interpretation and evaluation4.71% (21)Interpreting and Evaluating
IA2 Analysis of evidence4.26% (19)Analysing
IA3 Conclusion and evaluation5.37% (24 of 447)Evaluating, with the conclusion in Interpreting
IA3 Analysis and interpretation4.25% (19)Analysing, with arguments in Interpreting
IA3 Research and planning2.46% (11)Forming and Finding

One inconsistency in QCAA's numbers: the report's confirmation table lists 447 schools for IA1 and 446 each for IA2 and IA3, and the IA2 percentages divide exactly by 446, but the IA3 percentages only work out if they are divided by 447. Out of 446, 24 schools would be 5.38%, 19 would be 4.26% and 11 would be 2.47%, not the 5.37%, 4.25% and 2.46% QCAA printed. We give the IA3 counts that reproduce QCAA's published percentages, out of 447. Either way, the gap is one school.

Communication was almost never lowered: at 2 of 446 schools in IA2 and none in IA3. Its parts now sit inside the other criteria, and the report notes that while the criteria have been reorganised, the way teachers judge each characteristic has not changed. Its advice for the 2025 criteria is built into the sections above.

QCAA's May 2026 endorsement report, on the task sheets schools wrote for the 2026 cohort, shows the tasks themselves being tightened. Of 452 instruments for each IA, only 38% of data tests, 29% of student experiments and 58% of research investigations were endorsed at their first application. For you, that means data tests built on the Unit 3 practicals with any p-value printed in the data, IA2 experiments that investigate biodiversity or ecosystem dynamics, and IA3 claims in one specific Unit 4 context, without an ethical debate built in.

QCAA's report on the 2026 cohort, the first assessed in Units 3 and 4 under the 2025 syllabus, should follow the same January pattern. Read it in Term 1. Our guide to QCAA subject reports shows where to find it and how to use it.

Are there cut-offs for Biology assessments?

Only in IA1. The data test turns a percentage into a mark through the cut-offs above. IA2 and IA3 have no percentage cut-offs: your teacher matches your response to the descriptors for each criterion, and our guide on how to read an ISMG explains how a mark is chosen within a band. For why an IA mark out of 20 has no letter grade, see what your ISMG mark means.

The A to E cut-offs apply only to your final result out of 100. For the 2025 Biology cohort they were A for 87 to 100, B for 71 to 86, C for 50 to 70, D for 20 to 49 and E for 0 to 19. Of 13,961 students who completed Units 3 and 4, 31.98% received an A, 47.99% a B, 19.56% a C and 0.47% a D. The boundaries are set each year and can move, so treat them as a guide. For how the internal and external marks combine, see how your QCAA subject result is built.

A Term 1 plan for 2027

  • Before Term 1: learn the Lincoln index and Simpson's diversity index by heart, check your calculator is on QCAA's approved list, and make sure you know what a p-value of 0.03 means.
  • After each Unit 3 practical or field trip: write a half-page summary of what was sampled, how the quadrats or transects were placed, what was counted and what the graph showed. The data test draws on these practicals, and IA2 starts from one of them.
  • Before the data test: practise infer and justify items until quoting a value from the data comes first. When the test comes back, sort your lost marks.
  • When IA2 starts: check your practical is Unit 3, decide whether your question is comparative or correlational, and run a short pilot to choose how many quadrats are enough.

Key takeaways

  • IA1 is marked on the data. Give the conclusion and the reason, quote values from the dataset, and show every step of an SDI or Lincoln index calculation.
  • IA2 starts with a Unit 3 practical about biodiversity or ecosystems. A catalase or osmosis experiment is Unit 1, however good it is.
  • Justify your sampling, then read the spread. Choose the number and placement of quadrats from data, test your comparison, ask where the variation comes from, and name the confounding factor your design cannot rule out.
  • IA3 turns a claim into genetics. Translate it into inheritance, allele frequencies or selection, convert each source's numbers before comparing, and take your findings back to the claim.

Questions about this topic? Ask students taking the same subject in the QCE study group.

Frequently asked questions

What are the three internal assessments in QCAA Biology?

Under the 2025 syllabus, Biology has three internal assessments: IA1, a 10-mark data test on Unit 3; IA2, a 20-mark student experiment on Unit 3; and IA3, a 20-mark research investigation on Unit 4. Together they are 50 of your 100 marks. The other 50 come from the external exam, two papers of 90 minutes each on Units 3 and 4.

How is the Biology data test marked?

The data test has 5 minutes perusal and 60 minutes working time, and you may use an approved calculator. There is no formula book, so learn the Lincoln index and Simpson's diversity index. It uses two to four unseen datasets from Unit 3. Your raw score becomes a percentage, and fixed cut-offs turn it into a mark out of 10: more than 90% earns 10, more than 80% earns 9, and so on down to 0 for 1% or less.

Can a catalase or enzyme experiment be used for Biology IA2?

Not in General Biology. The student experiment must modify a practical relevant to Unit 3, Biodiversity and the interconnectedness of life, and enzymes and osmosis are Unit 1 subject matter. QCAA's 2025 report told schools that the research question should investigate biodiversity or ecosystem dynamics, such as species distribution, population growth or carrying capacity. Most of the Unit 3 practicals listed in QCAA's sample task are field sampling with quadrats or transects.

Which statistics should I use in my Biology student experiment?

It depends on the design. The 2025 syllabus lists the mean, standard deviation, standard error and Student's t-test for comparative investigations, and regression, Pearson's correlation coefficient and Spearman's rank for correlational ones. Show error bars on your graphs, and interpret the pattern in your uncertainty data rather than only stating the standard error. The chi-square test is not named in the syllabus.

What claims are used in the Biology research investigation?

Your teacher provides a list of claims relevant to Unit 4, Heredity and continuity of life. QCAA's sample offers "Gene therapy can reverse ageing", "DNA testing can prove genealogical ancestry", "Transgenic organisms offer a viable and effective future for human health" and "Sustainable reserve size should be based on the data from gene pool variability". QCAA advises schools to set claims in one specific context, such as gene therapy, CRISPR or DNA profiling, without an ethical debate built in.

What were the grade cut-offs for QCAA Biology in 2025?

For the 2025 Biology cohort, the final result out of 100 needed 87 for an A, 71 for a B, 50 for a C and 20 for a D. Of 13,961 students who completed Units 3 and 4, 31.98% received an A and 47.99% a B. These boundaries apply only to the final result and can move each year. Individual IA2 and IA3 marks have no percentage cut-offs.

Back to all articles

Read next

An ancient coin, a fragment of a carved inscription and an open scroll on a warm off-white surface, with a coral thread pinned from the inscription through the coin to an open essay page with one coral underline

QCAA Ancient History IAs Explained (2025 Syllabus)

A source essay exam, an independent source investigation and a research essay: 75 of your 100 marks. What each Ancient History ISMG rewards, why ancient is not the same as primary, and where QCAA marked schools down.

Jackson Wright6 November 2026
Three historical sources on a warm off-white surface, a typed letter, a small photograph of a factory skyline and a cartoon panel of silhouetted figures, with a coral thread pinned from the letter through the photograph to an open essay page with one coral underline

QCAA Modern History IAs Explained (2025 Syllabus)

An exam essay on sources, an independent source investigation and a research essay: 75 of your 100 marks. What each Modern History ISMG rewards, and why Evaluating is where QCAA marked schools down most.

Jackson Wright6 November 2026