Every QCAA Chemistry student sits the same three kinds of internal assessment: a 10-mark data test, a 20-mark student experiment and a 20-mark research investigation. They use the same criteria as the other 2025 sciences, but Chemistry changes what top-band work looks like. Your data are titres, cell potentials and masses read off a balance, so uncertainty and significant figures carry marks. Your equations are judged on their arrows, charges and states. And a claim about "green" or "better" plastics has to become a property someone has measured.
This guide is for Year 12s starting Units 3 and 4 in Term 1 2027. It works through each IA under the current Chemistry 2025 syllabus (v1.3, January 2026): the conditions, the marks and criteria, what the top band looks like in Chemistry, and what QCAA's latest reports say students and schools get wrong. For the skills every science shares, such as justifying a modification or returning to the claim, it links to our student experiment guide and research investigation guide rather than repeating them.
The three Chemistry IAs at a glance
Internal assessment is 50 of your 100 marks. The external exam is the other 50.
| Task | Marks and conditions |
|---|---|
| IA1 Data test, Unit 3 | 10 marks, one criterion. 60 minutes plus 5 minutes perusal, supervised, unseen data, formula and data book allowed |
| IA2 Student experiment, Unit 3 | 20 marks, four criteria of 5. About 10 hours of class time, up to 2000 words or 11 minutes |
| IA3 Research investigation, Unit 4 | 20 marks, four criteria of 5. About 10 hours of class time, up to 2000 words or 11 minutes |
| External exam, Units 3 and 4 | 50 marks. Two papers, each 90 minutes plus 5 minutes perusal |
Unit 3, Equilibrium, acids and redox reactions, has two topics. Chemical equilibrium systems covers equilibrium constants, acids and bases, pH and titrations. Oxidation and reduction covers redox equations and galvanic and electrolytic cells. Unit 4, Structure, synthesis and design, covers organic structure, reactions and polymers, then chemical synthesis, from the Haber process to green chemistry. IA1 and IA2 draw on Unit 3. IA3 draws on Unit 4. To see how the four results combine, use the subject result calculator.
When each IA falls in 2027
Your school sets the exact dates, and your task sheet is the authority. QCAA's Senior Education Profile calendar sets the deadlines schools work back from.
- 27 January
Term 1 starts and Unit 3 begins. The practicals you run in these weeks are the source of the IA1 data and the base for IA2.
- Term 1
The data test. Schools must enter provisional marks for the first internal assessment by Tuesday 13 April 2027, the second day of Term 2, so expect IA1 in Term 1.
- Terms 1 and 2
The student experiment, usually with a draft checkpoint. Schools that opt in to QCAA's second confirmation event must enter IA2 provisional marks by Tuesday 8 June 2027. Other schools submit them with the remaining internal assessments on Tuesday 17 August 2027.
- Terms 2 and 3
The research investigation on Unit 4. Provisional marks for the remaining internal assessments, including IA3, are due on Tuesday 17 August 2027.
- 25 Oct to 16 Nov
The external assessment block. QCAA sets the day of the Chemistry papers.
For how the whole cycle runs from task sheet to submission, see the internal assessment timeline.
IA1: the data test
The data test gives you tables and graphs from Unit 3 chemistry you have not seen before, and asks you to calculate from them, find the patterns in them and draw conclusions from them. It is the only internal assessment sat under exam conditions.
About 30% of the marks go to working out unknown quantities or features of a dataset, about 30% to identifying trends, patterns, relationships, limitations or uncertainty, and about 40% to drawing conclusions based on analysis. In Chemistry, that means calculating a concentration from a titre or a Kc from equilibrium concentrations; reading the equivalence point and buffer region off a pH curve; ranking metals from displacement results; and deducing what the data says about an equilibrium or a cell.
QCAA's own sample data test for this syllabus shows the range. It has 11 questions worth 20 marks across two datasets. The first is a titration of a diluted ammonia cleaning product with hydrochloric acid, with questions on the pH at half-equivalence, pKb, the choice of indicator and the ammonia concentration. The second pairs displacement results for four unknown metals with the voltages of cells built from them, and ends with a balanced redox equation.
How the data test is marked
There are no criteria to balance. Your raw score on the paper becomes a percentage, and the percentage becomes a mark out of 10 through fixed cut-offs. The top mark needs "consistent demonstration, across a range of scenarios", and more than 90% of the paper.
| Your raw score | IA1 mark |
|---|---|
| More than 90% | 10 |
| More than 80% | 9 |
| More than 70% | 8 |
| More than 60% | 7 |
| More than 50% | 6 |
| More than 40% | 5 |
| More than 30% | 4 |
| More than 20% | 3 |
| More than 10% | 2 |
| More than 1% | 1 |
| 1% or less | 0 |
Read "more than" literally. On a 20-mark paper like QCAA's sample, 18 out of 20 is exactly 90%, which is not more than 90%, so it earns 9. QCAA's 2025 report makes the same point with 6 out of 10: that is 60%, not more than 60%, so it earns 6 rather than 7. One raw mark can be one IA mark.
What full-marks answers do
- Justify from the data, not from Le Châtelier. QCAA's 2025 subject report and its June 2026 endorsement report both tell schools to write questions that make you conclude or predict from the dataset rather than from Le Châtelier's principle. The principle can connect your evidence to your answer, but the evidence has to be a number or feature from the data.
- Show the working every time. QCAA's report gives a two-mark "Calculate Kc… Show your working" question 1 mark for the value and 1 for the working. QCAA's sample marking scheme also allows follow-through: if an early answer is wrong and you use it correctly later, you lose the mark once. The marker can only follow working they can see.
- Contrast with both values. QCAA's sample asks you to contrast the half-equivalence and equivalence points in terms of pH and volume. Each mark needs the value read from the graph and the comparison, not one without the other.
- Use the data book. It has the indicator table, standard electrode potentials and the uncertainty formulas. QCAA's sample asks you to choose an indicator from it, and the right one is the indicator whose colour-change range contains the pH at equivalence.
Here is a two-mark item of the kind you will meet, with an invented dataset. For the reaction A(g) + B(g) ⇌ 2C(g), Kc is 52 at 400 K, 18 at 500 K and 7.5 at 600 K. The question: Deduce whether the forward reaction is exothermic or endothermic. Use data to justify your response.
1 of 2 marks
"Exothermic, because according to Le Châtelier's principle an increase in temperature favours the endothermic reaction."
2 of 2 marks
"Exothermic. Kc fell from 52 at 400 K to 7.5 at 600 K, so at higher temperatures the equilibrium mixture contains relatively less C. Heating favours the endothermic direction, which here is the reverse reaction, so the forward reaction is exothermic."
Both reach the right deduction. The first never touches the data, so its justification is theory. The second quotes the trend in Kc and only then uses the principle to link it to the answer. Our guide to what QCAA's cognitive verbs ask for covers the other verbs on the paper.
Units, working and significant figures
Calculation items are where Chemistry marks leak. The syllabus sets the rule: when you add or subtract, give the answer to the least number of decimal places; when you multiply or divide, give it to the least number of significant figures. Here is the working for three short items on an invented dataset.
A class titrated 20.00 mL of a monoprotic acid, HA, with 0.100 mol L−1 sodium hydroxide. The pH curve starts at pH 2.9, flattens into a buffer region, and rises steeply to an equivalence point at 16.40 mL and pH 8.7. After 8.20 mL of base, the pH is 4.76.
n(NaOH) = 0.100 mol L−1 × 0.01640 L = 1.64 × 10−3 mol. HA is monoprotic, so it reacts 1:1 with NaOH and n(HA) = 1.64 × 10−3 mol. c(HA) = 1.64 × 10−3 mol ÷ 0.02000 L = 0.0820 mol L−1. After 8.20 mL the acid is half neutralised, so pH = pKa = 4.76, and Ka = 10−4.76 = 1.7 × 10−5. HA is a weak acid: its initial pH of 2.9 is well above the 1.09 that a 0.0820 mol L−1 strong acid would give, the curve has a buffer region, and the equivalence point is above pH 7.
Why this scores: volumes are converted to litres before use, every line has a unit, and the concentration keeps three significant figures because 0.100 has three. A pH of 4.76 has two decimal places, which carries two significant figures into Ka. The weak-acid deduction uses the same three features QCAA's 2025 report accepted as justification in a similar sample item: the initial pH, the buffer region and the shape of the curve at equivalence. If the next item asks for an indicator, phenolphthalein is the one in the data book whose range, pH 8.3 to 10.0, contains 8.7.
How IA1 prepares you for the external exam
The data test is assessed on three of the external exam's four objectives: applying understanding to work out unknown quantities, analysing data to identify trends, patterns, relationships, limitations or uncertainty, and interpreting evidence to draw conclusions. The exam adds describing, and widens the scope to Units 3 and 4 across two 90-minute papers. It can ask you to calculate and to interpret unseen graphs, tables or diagrams, and QCAA provides the same formula and data book in both papers. Our guide to the Chemistry formula and data book lists what it gives you and what it leaves out, such as a formula for pKa and the method for balancing half-equations.
QCAA's 2025 subject report, on the last exam set under the 2019 syllabus, said students did well when they calculated pH and pKa, determined oxidation states, and inferred the nature of a reaction from Kc values and other data. It asked for more care with chemical conventions, and those same conventions earn marks in the data test and in IA2:
- Arrows match the acid. A weak acid only partly dissociates, so it takes an equilibrium arrow: CH3COOH(aq) + H2O(l) ⇌ CH3COO−(aq) + H3O+(aq). A strong acid fully dissociates, so it takes a forward arrow: HCl(aq) + H2O(l) → H3O+(aq) + Cl−(aq).
- Redox equations carry charges and states. Cu2+(aq) + 2e− → Cu(s), not Cu + 2e → Cu.
- Oxidation states and ionic charges are written differently. The oxidation state puts the sign first, +2. The ionic charge puts the number first, 2+.
- The marks set the length. QCAA's example is a 3-mark question asking for a prediction and an explanation, which typically needs the prediction and two points of reasoning.
The same report named three topics to know in detail: the products of electrolysis of molten salts and of dilute and concentrated solutions, the hydrogen fuel cell under acidic and alkaline conditions, and the reagents and conditions for organic reaction pathways. The first is Unit 3, so IA1 and IA2 are your chance to get it right early.
IA2: the student experiment
You modify, which means refine, extend or redirect, an experiment relevant to Unit 3 to address your own related hypothesis or question. The base is a practical or simulation performed in class.
- Forming5 marks
- Finding5 marks
- Analysing5 marks
- Interpreting and Evaluating5 marks
Start from a Unit 3 practical that measures something
The syllabus lists eight Unit 3 investigations: factors that affect equilibrium, solubility, properties of acids and bases, acid–base or conductometric titrations, displacement reactions, galvanic cells, factors that affect electrolysis, and electroplating using an electrolytic cell. QCAA's sample task adds the electrical conductivity of strong and weak acids and bases, and allows another Unit 3 practical negotiated with your teacher. Rates of reaction is Unit 2 subject matter in this syllabus. A rate can still be your dependent variable, as in QCAA's own example, which times how long electrolysis takes to produce 25 mL of hydrogen, but the chemistry you investigate has to be Unit 3.
Whichever you choose, it has to produce numbers you can process. QCAA's 2025 report told schools that the methodology should collect data that measures variables, such as pH, concentration, temperature or time, rather than comparing products, and enough of it to find trends and uncertainty. Its example is cell potential measured at five different electrolyte concentrations.
Forming: a specific question and a justified modification
The top band of Forming asks for "a considered rationale for the experiment", "justified modifications to the methodology", "a specific and relevant research question", "a methodology that enables the collection of sufficient and relevant data", and "appropriate use of genre and referencing conventions". QCAA's 2025 report gives a galvanic cell question as its model of specific: "What is the relationship between the cell potential and the electrolyte concentration in a Daniell cell at 25 °C when one electrolyte concentration varies and the other is constant at 1M?" It names the independent variable, the dependent variable and what is held constant. Here is the same move for electroplating, a different Unit 3 practical.
Relevant, not specific
"How does current affect electroplating?"
Specific and relevant
"How does the current, from 0.10 A to 0.50 A, affect the mass of copper deposited on a copper cathode in 20 minutes from 0.50 mol L−1 copper(II) sulfate solution?"
The second names the independent variable and its range, the dependent variable and how it is measured, and the controls. Because the rationale can predict the result from q = It and q = n(e−) × F, both in the data book, it also gives you a theoretical value to compare against, which Analysing will need.
The modification is where most of Forming is decided. Our student experiment guide explains the general rule: a feasible change caps you at 2 to 3, and a justified one names the limitation, the change, and what the change makes possible. QCAA's 2025 report asks for modifications that explain how they improve the reliability and validity of the data. In Chemistry, the strongest case is often uncertainty: the class method produced a quantity too small for the instrument measuring it.
Feasible
"We repeated the class electroplating practical at five different currents."
Justified
"In the class practical, plating for 5 minutes at 0.10 A deposited about 10 mg of copper. The balance reads to ±0.001 g and the mass gain is the difference of two readings, so its uncertainty was ±0.002 g, about 20% of the result. This modification plates for 20 minutes at five currents from 0.10 A to 0.50 A. The deposits range from about 40 mg to 200 mg, which cuts the percentage uncertainty to between 5% and 1%, and five currents with three trials each are enough to test whether mass is proportional to current, as Faraday's law predicts."
The justified version puts a number on the limitation, states the change, and says what the change makes possible. It also uses the syllabus's rule for combining uncertainties: when you subtract one measurement from another, the absolute uncertainties add, so two readings of ±0.001 g give ±0.002 g.
Finding: risks, waste and raw data
The top band of Finding asks for "considered management of risks/ethical issues/environmental issues", "collection of sufficient and relevant raw data", and "fluent and concise use of scientific language and representations". In Chemistry the environmental issue is usually waste. QCAA's 2025 report wants "the impacts of hazards associated with the experiment and the subsequent management of risks" considered in how the methodology is performed, which means the method you modified, not the class version.
Copper(II) sulfate solution is harmful if swallowed and irritates the eyes and skin, so safety glasses and gloves were worn whenever the electrolyte or the wet electrodes were handled, which in this method happens at every weighing. It is also very toxic to aquatic life. Because the copper anode dissolves as copper plates onto the cathode, the Cu2+ concentration stays close to constant, so one 200 mL batch of electrolyte was used for all 15 trials instead of fresh solution for each, and it was collected in the heavy-metal waste container at the end, not poured down the sink, so no copper ions reached the drains.
Why this scores: each strategy comes with its reason, the reasons are specific to this method, and the waste plan uses the chemistry of the cell. The same precautions listed without reasons describe management, which is the 2–3 band.
The other two lines of Finding are lost by omission. Show every trial's raw mass, not just the means, with the instrument's uncertainty in the column heading. Record each reading to the precision of the instrument, so a mass from a 0.001 g balance is 0.109 g, not 0.11 g. And write each equation with states and charges, such as Cu2+(aq) + 2e− → Cu(s) at the cathode.
Analysing: uncertainty, then percentage error
-
4–5
correct and thorough
correct and relevant processing of data; thorough identification of relevant trends/patterns/relationships; thorough and appropriate identification of the uncertainty and limitations of evidence
-
2–3
basic and obvious
basic processing of data; identification of obvious trends/patterns/relationships; basic identification of uncertainty and/or limitations of evidence
-
1
incorrect or insufficient
incorrect or irrelevant processing of data; identification of incorrect or irrelevant trends/patterns/relationships; incorrect or insufficient identification of uncertainty and limitations of evidence.
The syllabus lists the tools: the mean, gradients, scatterplots with maximum and minimum trendlines and R2, the absolute uncertainty of the mean, percentage uncertainty and percentage error, and propagation of uncertainty. Add absolute uncertainties when you add or subtract, and percentage uncertainties when you multiply, divide or raise to a power. The data book prints the formulas for the absolute uncertainty of the mean, percentage uncertainty and percentage error. QCAA's 2025 report praised analyses that calculated means, percentage uncertainties and percentage error, drew scatter graphs with lines of best fit and error bars, and identified uncertainty "through systematic and effective analysis of the evidence rather than discussing problems relating to methodology".
Absolute uncertainty of the mean
Half the range of your repeats: (xmax − xmin) ÷ 2. Trials of 0.109, 0.111 and 0.113 g give ±0.002 g.
Percentage uncertainty
The absolute uncertainty as a percentage of the measurement. It tells you how precise a result is.
Percentage error
How far a result is from an accepted or theoretical value, as a percentage of that value. It tells you how accurate the result is.
Random and systematic error
Random error scatters repeats on both sides of the true value and shrinks with more trials. Systematic error shifts every result the same way, and more trials will not remove it.
The mass of copper deposited increased linearly with current (Figure 2). The trendline through the five means has a gradient of 0.370 g A−1 and R2 = 0.998. At 0.30 A, three trials deposited 0.109 g, 0.111 g and 0.113 g, a mean of 0.111 ± 0.002 g, which is a percentage uncertainty of 1.8%. Faraday's law predicts 0.1186 g at this current, so the percentage error is 6.4%. The percentage error is more than three times the percentage uncertainty, and the mean at every current fell below its prediction, so random error cannot explain the gap and the evidence points to a systematic error. The maximum and minimum trendlines through the error bars have gradients of 0.380 and 0.360 g A−1, so even the steepest line the data allow is below the predicted 0.395 g A−1.
Why this scores: the trend is quantified, the uncertainty comes from this data's repeats and trendlines, and the analysis compares precision with accuracy to decide what kind of error is present. That comparison is what turns "basic identification of uncertainty" into "thorough and appropriate".
Its 2019 predecessor, Analysis of evidence, was marked down in 11.00% of the IA2 samples QCAA checked in 2025. More on that below.
Interpreting and Evaluating: reliable is not the same as valid
The top band needs "justified conclusion/s linked to the research question", a "justified discussion of the reliability and validity of the experimental process", and "suggested improvements and extensions to the experiment that are logically derived from the analysis of evidence". The middle band accepts reliability and/or validity, and improvements and/or extensions. The top band needs both halves of each.
QCAA's 2025 report describes what that looks like in Chemistry. Strong conclusions referred to the trends in the analysis "rather than simply restating data", and compared the evidence with the theory in the rationale. Strong discussions of validity and reliability were justified "by referring to data, systematic and random errors in datasets and, where appropriate, accepted values for constants". Validity is the extent to which the experiment measured what was intended. Reliability is the likelihood that another experimenter would obtain the same results.
In the electroplating example, the trials agreed to within ±0.002 g at every current, so another student following the method would very likely get the same masses. The data are reliable. They are not fully valid, because every mean sat about 6% below Faraday's prediction, and a miscalibrated ammeter would give that other student the same low masses. The gradient implies a Faraday constant of 1.03 × 105 C mol−1, 6.8% above the data book's 96 485 C mol−1.
The analysis also narrows down the cause. The trendline passes almost through the origin, so the missing mass grows in proportion to the charge passed. A fixed loss, such as a flake of copper lost in each rinse, would lower every mass by the same amount and leave the gradient unchanged. If some of the current were reducing water to hydrogen, the shortfall would be expected to grow at higher currents, but it is close to 6% at every current. That points to the charge actually passed, from the current reading or the timing, rather than to copper being lost.
So the improvement is to connect a calibrated multimeter in series to check the power supply's ammeter, and log the current every minute to calculate the charge actually passed. The extension is to vary the cathode's surface area at a fixed current, to test whether current density, rather than current, changes how much of the charge deposits copper. "Do more trials" would not help: the trials already agree, and more of them cannot remove a systematic error.
IA3: the research investigation
You gather evidence related to a research question to evaluate a claim relevant to Unit 4. Your teacher provides a list of claims. QCAA's sample instrument offers seven, including "Effective insecticides are chemically unreactive", "Green chemistry is clean chemistry" and "Not all plastics are bad".
- Forming and Finding5 marks
- Analysing5 marks
- Interpreting5 marks
- Evaluating5 marks
Genre and referencing conventions are marked in Forming and Finding, and use of scientific language/representations in Interpreting. For referencing, see our guide to referencing and using sources.
From claim to a Unit 4 research question
QCAA's 2025 report asks for a rationale that "clearly connects the research question to Unit 4 subject matter and demonstrates how the research question was developed from the claim", and says why the independent and dependent variables were chosen. Its example of a specific question comes from green chemistry: "does the improved synthesis from ibuprofen's original route to its new green route result in less waste reactants and more useful products?"
In Chemistry, the step that most often goes missing is turning the claim's everyday words into chemistry. Take an invented claim: "Plant-based plastics can replace petroleum-based plastics."
As broad as the claim
"Are plant-based plastics as good as normal plastics?"
Specific and relevant
"How does the tensile strength of polylactic acid (PLA) compare with that of high-density polyethene (HDPE) at room temperature?"
"Plant-based" is not a chemical property. Polyethene made from sugarcane ethanol is the same polymer as polyethene made from crude oil. So the rationale moves from where a plastic comes from to what it is. PLA is a condensation polymer, a polyester with polar ester groups along its chain. HDPE is an addition polymer with long, unbranched, non-polar chains. Both are named in Unit 4. "Can replace" becomes one property a replacement needs, measured in a unit: tensile strength, in megapascals. That path, from claim to structure to a measurable property, is what "a considered rationale identifying clear development of the research question from the claim" looks like.
Analysing: check what each source measured
The top band of Analysing asks for "the identification of sufficient and relevant evidence", "thorough identification of relevant trends/patterns/relationships in evidence", and "thorough and appropriate identification of limitations of evidence". In Chemistry, two sources can report the same property and still disagree, because the number depends on how the sample was made and tested. A tensile strength for PLA depends on its molar mass, on how crystalline it is, on whether the specimen was moulded, extruded or 3D-printed, and on the test method and temperature.
Before you claim a trend across sources, record those details for each one. A difference that holds across preparation methods is strong evidence. One that appears only for 3D-printed specimens is a limitation to name. QCAA's 2025 report rewarded limitations that "thoroughly identified how or why each limitation made the evidence less effective in addressing the research question".
Claims about green chemistry need the same care, because sources measure "green" in different ways. Take ethanol, which Unit 4 makes two ways. Atom economy uses the molar masses from the data book.
| Route to ethanol | Atom economy |
|---|---|
| Fermentation: C6H12O6(aq) → 2C2H5OH(aq) + 2CO2(g) | (2 × 46.08) ÷ 180.18 × 100 = 51.1% |
| Hydration of ethene: C2H4(g) + H2O(g) ⇌ C2H5OH(g) | 46.08 ÷ 46.08 × 100 = 100% |
By atom economy, hydrating ethene is the greener route. But industrial ethene usually comes from crude oil and natural gas, and green chemistry also values renewable raw materials, which favours fermentation. A source that calls one route "greener" may be using atom economy, percentage yield, energy use or the feedstock. Say which before you compare it with a source that used another.
Interpreting: argue from structure
Interpreting needs "justified scientific argument/s" and a "justified conclusion linked to the research question". QCAA's 2025 report described strong interpretation as justified using scientific arguments linked to Unit 4 chemical concepts and supported with data from the sources. In Chemistry, that means explaining the trend in your evidence with structure.
If your sources agree that PLA has the higher tensile strength, the argument links that to the forces between chains and how closely they pack, for example the dipole–dipole attractions between PLA's polar ester groups, which non-polar polyethene chains lack. It also stays within what the structure allows. PLA has no O–H or N–H groups along its chain, so hydrogen bonding between chains is not part of the argument. Nylon, a polyamide, is where that belongs. Getting this right is part of "fluent and concise use of scientific language/representations", the third line of Interpreting.
Evaluating: judge the evidence, then return to the claim
Its 2019 predecessor, Conclusion and evaluation, was the research investigation criterion QCAA most often marked down when it checked schools' marks in 2025. Here is the top band.
-
4–5
justified and extrapolated
justified discussion of the quality of evidence; extrapolation of credible findings of the research to the claim; suggested improvements and extensions to the investigation that are considered and relevant to the claim
The 2–3 band asks only for a "reasonable description of the quality of evidence", "application of relevant findings of the research to the claim", and improvements and/or extensions.
QCAA's 2025 report is precise about the difference. Strong discussions of the quality of evidence "addressed the identified limitations and their impact on the ability to address the research question, rather than the credibility of the sources used as evidence". So "all five sources were peer-reviewed" is not yet a discussion of quality. "Three of the five sources tested 3D-printed specimens, which can be weaker between their printed layers, so the comparison for moulded PLA rests on two studies" is.
Then go back to the claim. Tensile strength findings support "plant-based plastics can replace petroleum-based plastics" for rigid items used at room temperature, and only for PLA against HDPE. They say nothing about heat, and PLA softens at around 60 °C, below the temperature of a hot drink. That is extrapolation, and saying where it stops is part of a justified evaluation. QCAA's report wants improvements that refine the investigation "to obtain more valid and/or reliable evidence", and extensions that consider "aspects of the claim not addressed by the research question". Heat resistance is that extension here. Our research investigation guide explains why the conclusion to the research question and the return to the claim are separate jobs.
What QCAA's 2025 and 2026 reports flag
QCAA's Chemistry subject report: 2025 cohort, published in January 2026, reviewed the last cohort assessed under the 2019 syllabus, so its criterion names are the old ones. It also lists the key differences for the 2025 syllabus, which is the one you will be marked against. When QCAA checked schools' marks through confirmation, it agreed with every IA1 sample, but with 78.28% of IA2 samples and 83.77% of IA3 samples. Where it changed a mark, it almost always lowered it.
| Criterion (2019 name) | Marked down | Closest 2025 criterion |
|---|---|---|
| IA2 Research and planning | 15.79% | Forming, plus risks and data in Finding |
| IA2 Interpretation and evaluation | 11.24% | Interpreting and Evaluating |
| IA2 Analysis of evidence | 11.00% | Analysing |
| IA3 Conclusion and evaluation | 9.07% | Evaluating, with the conclusion in Interpreting |
| IA3 Research and planning | 8.35% | Forming and Finding |
| IA3 Analysis and interpretation | 5.73% | Analysing, with arguments in Interpreting |
Communication was the one criterion QCAA did not lower in either task. The report notes that the criteria have been reorganised for the 2025 syllabus, but the way teachers judge each characteristic has not changed. The student-facing points it makes for the current syllabus are built into the sections above: a question that names its variables, modifications justified by their effect on reliability and validity, data measured at enough values, uncertainty found in the data rather than in a paragraph about method, and a quality-of-evidence discussion about limitations rather than credibility.
QCAA's June 2026 endorsement report, on the task sheets for the first Units 3 and 4 cohort under this syllabus, adds three points worth knowing as a student. Data test questions should make you work from the dataset, not from Le Châtelier's principle. Schools should make clear that only one complete or near-complete draft is submitted for feedback, so make yours count. And IA3 claims should keep you in Unit 4 structure and synthesis, away from the fuel energetics of Units 1 and 2.
QCAA's report on the 2026 cohort, the first assessed in Units 3 and 4 under this syllabus, should follow the same January pattern. Read it in Term 1. Our guide to QCAA subject reports shows where to find it and how to use it.
Are there cut-offs for Chemistry assessments?
Only in IA1. The data test turns a percentage into a mark through the cut-offs above. IA2 and IA3 have no percentage cut-offs: your teacher matches your response to the descriptors for each criterion, and our guide on how to read an ISMG explains how a mark is chosen within a band. For why an IA mark out of 20 has no letter grade, see what your ISMG mark means.
The A to E cut-offs apply only to your final result out of 100. For the 2025 Chemistry cohort they were A for 87 to 100, B for 72 to 86, C for 50 to 71, D for 20 to 49 and E for 0 to 19. Of 9,335 students who completed Units 3 and 4, 44.26% received an A, 39.33% a B and 16.01% a C. The boundaries are set each year and can move, so treat them as a guide. For how the internal and external marks combine, see how your QCAA subject result is built.
A Term 1 plan for 2027
- Before Term 1: download the formula and data book and find the uncertainty formulas, the indicator table and the electrode potentials. Revise moles, concentration and the significant-figure rules from Units 1 and 2, and check your calculator is on QCAA's approved list.
- After each Unit 3 practical: write a half-page summary of what was measured, with what resolution, what the graph showed and which equation describes the chemistry. The data test draws on these practicals.
- Before the data test: practise "use data to justify" items until quoting a value from the data comes first, and every calculation shows units and working. When the test comes back, sort your lost marks.
- When IA2 starts: choose a practical that measures a variable at five or more values, work out the percentage uncertainty of the class method, and write the risk and waste plan for your modified method before you run it.
Key takeaways
- IA1 is marked on the data. Justify with a value from the dataset, show working with units, and keep significant figures honest.
- IA2 starts with a Unit 3 practical that measures something. Name both variables, and justify the modification with the uncertainty it removes.
- Compare precision with accuracy. Percentage uncertainty against percentage error tells you whether the error is random or systematic, and that decides your improvements.
- IA3 turns everyday words into chemistry. Translate the claim into a structure and a measurable property, check how each source measured it, and take your findings back to the claim.
Recommended
- the science student experiment, criterion by criterion
- the science research investigation, criterion by criterion
- what the Chemistry formula and data book gives you, and leaves out
- what QCAA's cognitive verbs ask for in the data test
- how to use QCAA subject reports
- the Psychology IAs, for comparison with another science
- finding the marks you are leaving behind on your ISMG
- what your ISMG mark means, and why it has no letter grade
- the QCAA sciences hub
- the QCAA subject result calculator



