Lesson 3 of 11 · 16 min

The wave equation

Explain why v=fλv = f\lambda, then use it with f=1Tf = \frac{1}{T} to solve problems about sound, echoes, seismic waves and waves that move into a new medium.

What you will be able to do

  • Explain why a wave travels one wavelength in one period, so v=fλv = f\lambda.
  • Solve problems with v=fλv = f\lambda and f=1Tf = \frac{1}{T}, including sound in air at 346 m s−1346\unit{m\,s^{-1}}.
  • Calculate distances and times from echoes.
  • Explain that the medium sets a wave's speed and the source sets its frequency.

Watch one crest of a wave. In the time a particle takes to complete one oscillation — one period, TT — the source makes exactly one more wave, and the crest moves forward to where the next crest was. So in one period the wave travels one wavelength.

The wave equation (on the formula sheet as v=fλv = f\lambda and f=1Tf = \frac{1}{T})
v=distancetime=λT=fλv = \frac{\text{distance}}{\text{time}} = \frac{\lambda}{T} = f\lambda
Interactive

Same medium, new frequency

Double the frequency and watch the wavelength halve: the speed stays the same because the medium has not changed. Then change the speed instead, as if the wave had moved into a new medium.

Key idea

The medium sets the speed; the source sets the frequency

  • The speed of a mechanical wave depends on the medium: what it is made of, and conditions such as its temperature or the tension in a string. In air at 25 °C, sound travels at vs=346 m s−1v_s = 346\unit{m\,s^{-1}} (formula and data book).
  • The frequency is set by the source, and does not change when the wave enters a new medium.
  • So the wavelength adjusts to fit: λ=vf\lambda = \frac{v}{f}. In the same medium, higher frequency means shorter wavelength.
Typical wave speeds (only the first and last rows are in the data book)
WaveMediumApproximate speed
SoundAir at 25 °C346 m s−1346\unit{m\,s^{-1}}
SoundAir at 0 °C331 m s−1331\unit{m\,s^{-1}}
SoundSea water1.5×103 m s−11.5 \times 10^{3}\unit{m\,s^{-1}}
SoundSteel5×1035 \times 10^{3} to 6×103 m s−16 \times 10^{3}\unit{m\,s^{-1}}
Seismic P waveEarth’s crustabout 6 km s−16\unit{km\,s^{-1}}
Seismic S waveEarth’s crustabout 3.5 km s−13.5\unit{km\,s^{-1}}
LightVacuum3×108 m s−13 \times 10^{8}\unit{m\,s^{-1}}

Worked example

Wavelength and period of a tuning fork's note

  • Simple familiar

A tuning fork vibrates at 512 Hz512\unit{Hz} in air at 25 °C. Calculate:

(a) the wavelength of the sound

(b) the period of the sound wave.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Write down ff, and vv from the data book if it is not given.

  2. Rearrange v=fλv = f\lambda for the unknown.

  3. Use T=1fT = \frac{1}{f} for the period.

Watch out for

  • Using 331 m s−1331\unit{m\,s^{-1}} or 340 m s−1340\unit{m\,s^{-1}} from another source. Use the data book value 346 m s−1346\unit{m\,s^{-1}} unless told otherwise.

A wave on a rope has a frequency of 4.0 Hz4.0\unit{Hz} and a wavelength of 0.75 m0.75\unit{m}. Calculate its speed.

in m s -1

Give 2 significant figures.

An echo is sound reflected from a surface. Bats, dolphins, ships' sonar and ultrasound scanners all time echoes to measure distance. The key is that the measured time is for the round trip: out to the reflector and back. So if the echo returns after time tt, the reflector is at distance

d=vt2d = \frac{vt}{2}

Worked example

Depth of the sea floor from a sonar echo

  • Complex familiar

A fishing boat's sonar sends a 50.0 kHz50.0\unit{kHz} pulse straight down. The echo from the sea floor returns 0.120 s0.120\unit{s} later. Sound travels at 1.50×103 m s−11.50 \times 10^{3}\unit{m\,s^{-1}} in sea water.

(a) Calculate the depth of the water.

(b) Calculate the wavelength of the sonar pulse in the water.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Halve the echo time to get the one-way time.

  2. Use d=vtd = vt with the speed in that medium.

  3. Convert prefixes before using v=fλv = f\lambda.

Watch out for

  • Using the full 0.120 s0.120\unit{s}, which doubles the depth to 180 m180\unit{m}.

  • Using 346 m s−1346\unit{m\,s^{-1}}: that is the speed of sound in air, not water.

A speaker plays a 1.25 kHz1.25\unit{kHz} tone in air at 25 °C. Calculate the wavelength of the sound in centimetres, to three significant figures.

in cm

Give 3 significant figures.

Common mistake

Prefixes and round trips

Most lost marks in wave-equation questions are not physics errors. Convert kHz, MHz, cm, mm and ms to SI units before substituting, and halve the time in any echo problem.

A sound wave passes from air into water, where it travels about four times faster. What happens to its frequency and its wavelength?

Choose one answer

Exam tip

Set out wave calculations the QCAA way

Write the formula, rearrange it, substitute with units, and give the answer with a unit and significant figures that match the data. If data are given to 2 or 3 significant figures, give 2 or 3 in the answer — and keep the unrounded value in your calculator for any later part.

Summary

  • A wave travels one wavelength in one period, so v=λT=fλv = \frac{\lambda}{T} = f\lambda.

  • Frequency and period are reciprocals: f=1Tf = \frac{1}{T}.

  • The medium sets the speed (sound in air at 25 °C: 346 m s−1346\unit{m\,s^{-1}}); the source sets the frequency; the wavelength adjusts, λ=vf\lambda = \frac{v}{f}.

  • For echoes, the time is for the round trip: d=vt2d = \frac{vt}{2}.

  • Convert prefixes to SI units before substituting, and match significant figures to the data.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 110% read

Save your progress with a free account