Lesson 2 of 11 · 16 min

Describing waves and reading wave graphs

Name the features of transverse and longitudinal waves and read amplitude, wavelength, period and frequency from displacement–position and displacement–time graphs.

What you will be able to do

  • Identify crests, troughs, compressions, rarefactions, displacement, amplitude and wavelength on diagrams and graphs.
  • Tell a displacement–position graph (a snapshot of the wave) from a displacement–time graph (one particle over time).
  • Read amplitude, wavelength and period from wave graphs, and use f=1Tf = \frac{1}{T}.

There are two ways to picture a wave on a rope. You can take a photograph: the whole rope at one instant. Or you can film one point on the rope and track how it moves up and down over time. Physics uses a graph for each, and they look almost the same — so the first thing to read is always the horizontal axis.

The words you need
QuantityMeaningSymbol and unit
DisplacementHow far a particle is from its rest (equilibrium) position, and in which directionm (often given in cm or mm)
AmplitudeThe maximum displacement, measured from the rest positionAA, m
WavelengthThe distance between two successive points in phase, such as crest to crestλ\lambda, m
PeriodThe time for one complete oscillation of a particleTT, s
FrequencyThe number of complete oscillations each secondff, Hz (= s−1\mathrm{s^{-1}})
VelocityHow fast and in which direction the wave (its energy) travelsvv, m s−1\mathrm{m\,s^{-1}}

A displacement–position graph: a snapshot of the whole rope at one instant. The horizontal axis is distance, so it shows the wavelength.

Common mistake

Amplitude is not crest to trough

Amplitude is measured from the rest position (the horizontal axis) to a crest, so here A=3 cmA = 3\unit{cm}, not 6 cm. Wavelength is measured between two points in phase — crest to the next crest, or between matching zero crossings — so here λ=40 cm\lambda = 40\unit{cm}. Crest to the next trough is only half a wavelength.

The graph shows a wave on a slinky at one instant. What is its wavelength?

in m

Now film a single point on the rope instead. It moves up, down and back up again, repeating every period, TT. Plotting its displacement against time gives a graph with the same shape, but the horizontal axis is now time, so the repeat distance is the period, not the wavelength.

A displacement–time graph for one point on the rope. The horizontal axis is time, so it shows the period.

Key idea

Period and frequency

Frequency is the number of oscillations each second, so it is the reciprocal of the period:

f=1TandT=1ff = \frac{1}{T} \qquad \text{and} \qquad T = \frac{1}{f}

The point above has T=0.50 sT = 0.50\unit{s}, so f=10.50=2.0 Hzf = \frac{1}{0.50} = 2.0\unit{Hz}: it completes two oscillations every second. Every particle along the wave oscillates with the same frequency, the frequency of the source.

Interactive

Build a wave

Change one quantity at a time. Which change moves the crests closer together? Which makes each particle oscillate faster? Which makes the wave taller without changing anything else?

A buoy rises and falls through 9 complete oscillations in 6.0 s6.0\unit{s}. What is the frequency of the water wave?

in Hz

Give 2 significant figures.

Worked example

Read amplitude, wavelength, period and frequency

  • Simple familiar

The graph shows the shape of a rope at one instant as a wave travels along it. A marked point on the rope takes 0.20 s0.20\unit{s} to move from a crest to the next trough.

Determine the amplitude, wavelength, period and frequency of the wave.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Check the horizontal axis to see what the graph can give you.

  2. Read amplitude from the rest position to a crest.

  3. Read wavelength between two points in phase.

  4. Use f=1Tf = \frac{1}{T}.

Watch out for

  • Taking crest to trough as the amplitude (30 cm) — that is 2A2A.

  • Taking the crest-to-trough time as the period — that is only T2\frac{T}{2}.

Longitudinal waves have the same quantities, but no crests or troughs to point at. Instead you look for compressions, where particles crowd together and the pressure is higher, and rarefactions, where they spread apart and the pressure is lower. The wavelength is the distance from the centre of one compression to the centre of the next. A graph of pressure against position then looks just like a transverse wave, with compressions at the peaks.

A longitudinal wave on a slinky. Compressions (C) are one wavelength apart, and the pressure is highest at each compression.

Going further: a displacement graph for a longitudinal wave

You can also graph a longitudinal wave as displacement against position, taking displacement to the right as positive. The graph looks like a transverse wave, but a crest now means "this particle is pushed furthest to the right", not "this point is highest".

The compressions are where the graph crosses zero going downwards: particles just to the left are pushed right and particles just to the right are pushed left, so they crowd together. Rarefactions are where it crosses zero going upwards. Amplitude and wavelength are read exactly as for a transverse wave.

On a displacement–time graph for one particle of a wave, what does the horizontal distance between two adjacent crests represent?

Choose one answer

Summary

  • Amplitude is measured from the rest position to a crest (or trough); crest to trough is 2A2A.

  • Wavelength is the distance between successive points in phase: crest to crest, or the centre of one compression to the next.

  • A displacement–position graph is a snapshot: read the wavelength from it. A displacement–time graph follows one particle: read the period from it.

  • f=1Tf = \frac{1}{T}. Frequency is measured in hertz, the number of oscillations per second.

  • Compressions are regions of high pressure and rarefactions regions of low pressure; on a pressure–position graph compressions are the peaks.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 110% read

Save your progress with a free account