Lesson 6 of 11 · 19 min

Harmonics on strings, natural frequency and resonance

Find the harmonics of a stretched string with L=nλ2L = \frac{n\lambda}{2}, describe the fundamental and natural frequencies, and explain resonance and why it transfers energy so efficiently.

What you will be able to do

  • Explain why a string fixed at both ends can only form standing waves with L=nλ2L = n\frac{\lambda}{2}.
  • Describe the fundamental (first harmonic), the higher harmonics and natural frequencies.
  • Solve problems about the frequency, wavelength and wave speed of harmonics on a string.
  • Describe resonance in a mechanical system and explain why energy is transferred efficiently at resonance.

Pluck a guitar string and it sounds one particular note. Press it against a fret and the note rises. Why does a string choose its notes? Because a wave on the string reflects from both fixed ends, and only the standing waves that fit between the ends survive.

Both ends of the string are fixed, so both must be nodes. The simplest pattern has a node at each end and one antinode in the middle: half a wavelength fits on the string. The next has three nodes and two loops: one whole wavelength. Each loop is half a wavelength, so a string of length LL holds nn loops when

L=nλ2,n=1,2,3,…L = n\frac{\lambda}{2}, \qquad n = 1, 2, 3, \dots

The first three harmonics of a string of length LL. Each loop is half a wavelength; dots mark the nodes.

The wave speed vv on a string depends only on the string's tension and mass per unit length, so it is the same for every harmonic. Combining L=nλ2L = n\frac{\lambda}{2} with v=fλv = f\lambda gives the frequency of the nnth harmonic:

fn=nv2L=nf1f_n = \frac{nv}{2L} = nf_1

Every harmonic is a whole-number multiple of the lowest frequency, f1f_1.

Definition

Fundamental, harmonics and natural frequencies

  • The fundamental, or first harmonic, is the lowest frequency at which the string forms a standing wave: f1=v2Lf_1 = \frac{v}{2L}.
  • The nnth harmonic has frequency nf1nf_1.
  • These are the string's natural frequencies: the frequencies at which it vibrates when it is disturbed (plucked) and left to vibrate freely. A plucked string vibrates at several of them at once, which is why a guitar and a violin playing the same note sound different.
Interactive

Harmonics on a string

Step through the harmonics. Each new harmonic adds one loop and one node, and its frequency goes up by one more lot of f1f_1.

Worked example

Harmonics on a guitar string

  • Simple familiar

The A string of a guitar is 0.650 m0.650\unit{m} long between the nut and the bridge, and its fundamental frequency is 110 Hz110\unit{Hz}.

(a) Calculate the wavelength of the fundamental.

(b) Calculate the speed of the waves on the string.

(c) Calculate the frequency and the wavelength of the third harmonic.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Use L=nλ2L = n\frac{\lambda}{2} to find the wavelength of harmonic nn.

  2. Use v=fλv = f\lambda; the speed is the same for every harmonic.

  3. fn=nf1f_n = nf_1.

Watch out for

  • Using λ=L\lambda = L for the fundamental. Only half a wavelength fits.

A string 0.50 m0.50\unit{m} long has a fundamental frequency of 200 Hz200\unit{Hz}. What is the frequency of its third harmonic?

in Hz

Tip

How a musician changes the note

f1=v2Lf_1 = \frac{v}{2L} explains every string instrument. Pressing a fret shortens LL, raising the pitch. Tightening a tuning peg increases the tension and so the wave speed vv, raising the pitch. The thick bass strings have more mass per metre, so vv is lower and so is the pitch.

Every object has natural frequencies: a swing, a wine glass, a bridge, a building, the air in a bottle. Now imagine forcing an object to vibrate by pushing it repeatedly at a driving frequency. Push at most frequencies and the object barely responds. Push at one of its natural frequencies and each push arrives at just the right moment to add more energy. The amplitude builds up and up. This is resonance.

Definition

Resonance

Resonance is the large-amplitude vibration of a system when it is driven at (or very near) one of its natural frequencies. At resonance, energy is transferred from the driver to the system most efficiently, because the driving force stays in step with the motion and does positive work on every cycle. The amplitude grows until the energy lost each cycle (to friction and air resistance) equals the energy supplied.

Interactive

Drive an oscillator

Slowly raise the driving frequency. Watch the amplitude: it peaks sharply when the driving frequency matches the natural frequency.

A stretched string shows resonance beautifully. Attach one end to a vibration generator and slowly raise its frequency. The string barely moves — until the frequency reaches f1f_1, when a large single loop suddenly appears. Raise it further and the string goes quiet again until 2f12f_1, then 3f13f_1. The string resonates only at its natural frequencies: its harmonics.

A playground swing has a natural frequency of 0.5 Hz. Which way of pushing it will make it swing highest with small pushes?

Choose one answer

Worked example

Why a crowd made a footbridge sway

  • Complex unfamiliar

A new footbridge can sway from side to side with a natural frequency of 1.0 Hz1.0\unit{Hz}. People walk at about 2 steps per second, and with each pair of steps (left foot, then right foot) a walker pushes the bridge sideways once each way. On opening day, a large crowd made the bridge sway so much that it was closed.

(a) Explain why the bridge swayed so strongly.

(b) Engineers proposed two fixes: (i) limit the number of people allowed on the bridge, or (ii) fit dampers that absorb energy from the sideways motion. Evaluate the two fixes.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Identify the driving frequency and the natural frequency.

  2. If they match, explain resonance in terms of efficient energy transfer.

  3. Judge each fix by whether it changes the frequency match or the energy balance, and at what cost.

Watch out for

  • Saying "resonance creates energy". The energy comes from the walkers; resonance transfers it efficiently.

  • Using the step frequency (2 Hz) as the driving frequency for the sideways sway.

Common mistake

Resonance does not create energy

Resonance does not make energy from nothing, and it is not "a very loud sound". It is the efficient transfer of energy from a driver into a system at its natural frequency. Name both frequencies in your answers: "the driving frequency equals the natural frequency of …".

Summary

  • A string fixed at both ends has nodes at both ends, so standing waves need L=nλ2L = n\frac{\lambda}{2} with n=1,2,3,…n = 1, 2, 3, \dots

  • The fundamental (first harmonic) is the lowest natural frequency, f1=v2Lf_1 = \frac{v}{2L}; the nnth harmonic is nf1nf_1. All harmonics travel at the same speed on a given string.

  • Natural frequencies are those at which an object vibrates freely after being disturbed.

  • Resonance is a large-amplitude vibration when the driving frequency equals a natural frequency, because energy is then transferred most efficiently.

  • Engineers must keep bridges and buildings from resonating with footsteps, wind and earthquakes, by changing their natural frequencies or adding dampers.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 110% read

Save your progress with a free account