Lesson 10 of 11 · 20 min
Ray diagrams for mirrors and lenses
Apply the law of reflection, and construct ray diagrams for plane mirrors, convex lenses and concave lenses to find the location, orientation and size of an image.
What you will be able to do
- State the law of reflection and investigate it with a ray box and a plane mirror.
- Draw a ray diagram to locate the image in a plane mirror, and describe the image.
- Draw ray diagrams for convex (converging) and concave (diverging) lenses using principal rays.
- Describe an image by its location, orientation, size and whether it is real or virtual.
A ray is a line showing the direction light travels: it is drawn at right angles to the wavefronts. Ray diagrams let you predict where an image will appear without any equations — just a ruler, a few rules about how light reflects and refracts, and care.
Key idea
The law of reflection
The angle of reflection equals the angle of incidence, . Both are measured from the normal, the line at to the mirror where the ray hits it. The incident ray, the reflected ray and the normal all lie in the same plane.
Tip
Investigating the law of reflection
Place a plane mirror on paper along a ruled line and draw the normal. Shine a narrow beam from a ray box at the point where the normal meets the mirror, mark the incident and reflected rays with crosses, and measure both angles with a protractor. Repeat for angles from about to . Your measurements should agree to within about , the precision of a protractor reading; a thick beam or a mirror whose reflecting surface is at the back of the glass adds random and systematic error.
Image in a plane mirror. Reflected rays reaching the eye are traced back (dashed) to the image, which is as far behind the mirror as the object is in front.
Key idea
The image in a plane mirror
- Location: as far behind the mirror as the object is in front.
- Orientation: upright (but laterally inverted — left and right are swapped).
- Size: the same size as the object.
- Type: virtual — the rays only appear to come from it, so it can't be shown on a screen.
You stand in front of a plane mirror. How far are you from your image?
Lenses refract light at both surfaces. A convex lens (thicker in the middle) is converging: rays parallel to the principal axis come together at the principal focus . A concave lens (thinner in the middle) is diverging: parallel rays spread out as if they came from a principal focus on the same side as the light arrived. The distance from the centre of the lens to is the focal length, . Every lens has a principal focus on each side, at the same distance.
Three principal rays for a convex lens
Parallel ray → through
A ray from the top of the object parallel to the principal axis refracts through the principal focus on the far side.
Centre ray → straight on
A ray through the optical centre of the lens passes straight through without changing direction.
ray → parallel
A ray through the principal focus on the object’s side emerges parallel to the principal axis.
Find the image
Where the rays meet is the top of a real image. If they only diverge, extend them backwards (dashed): where the extensions meet is a virtual image.
Worked example
Locate an image with a convex lens ray diagram
An object tall stands from a convex lens of focal length . Use a ray diagram to determine the location, orientation and size of the image, and state whether it is real or virtual.
Drawn to scale: one unit is 1 cm. The three principal rays meet at the top of the image.
Step 1: Set up the diagram to scale
Draw the principal axis and the lens. Mark at and at on both sides. Draw the object tall at — beyond .
Step 2: Ray 1 — parallel, then through F
From the top of the object, draw a ray parallel to the axis to the lens, then through on the far side.
Step 3: Ray 2 — through the centre
Draw a ray from the top of the object straight through the optical centre, undeviated.
Step 4: Ray 3 — through F, then parallel
Draw a ray through on the object's side to the lens; it leaves parallel to the axis. (Two rays are enough; the third checks your drawing.)
Step 5: Read the image
The rays meet to the right of the lens, below the axis. The image is between and , inverted, tall (half the size: diminished), and real because the rays actually meet there.
Try it yourself first, then check the working one step at a time.
Answer
The image is from the lens on the opposite side to the object (between and ). It is inverted, tall (diminished) and real.
Method
Draw to scale and mark F and 2F on both sides.
Draw at least two principal rays from the top of the object.
Where the rays meet is the top of the image; measure its distance and height.
Describe: location, orientation, size, real or virtual.
Watch out for
Drawing the parallel ray through the F on the object's side.
Leaving out the size or the real/virtual description.
| Object position | Image position | Image description | Used in |
|---|---|---|---|
| Beyond | Between and on the other side | Real, inverted, diminished | Camera, eye |
| At | At on the other side | Real, inverted, same size | Photocopier |
| Between and | Beyond on the other side | Real, inverted, magnified | Projector |
| At | No image — the rays emerge parallel | — | Spotlight, lighthouse |
| Between and the lens | Same side as the object | Virtual, upright, magnified | Magnifying glass |
You hold a convex lens of focal length so that a stamp is from it. Which describes the image you see?
Concave lenses use the same idea, with the rays bending outwards. A ray parallel to the principal axis refracts away from the axis, as if it came from on the object's side (draw that extension dashed). A ray through the optical centre goes straight on. A ray heading towards on the far side emerges parallel to the axis.
A concave lens always forms a virtual, upright, diminished image between and the lens, on the same side as the object.
Key idea
Concave lens images
Wherever the object is, a concave lens forms an image that is virtual, upright and diminished, located between and the lens on the same side as the object. That is why concave lenses correct short-sightedness: they form images of distant objects close enough for a short-sighted eye to focus on.
Which image could be shown on a screen?
Exam tip
Ray diagram checklist
Use a ruler and a sharp pencil. Draw at least two principal rays from the top of the object, with arrows showing direction. Draw real rays solid and virtual extensions dashed. Label on both sides. Then describe the image with all four: location (distance from the lens or mirror), orientation (upright or inverted), size (magnified, same size or diminished — or its height) and type (real or virtual). On a scale diagram, convert back to real distances.
Summary
Law of reflection: , both measured from the normal.
A plane mirror image is virtual, upright, the same size and as far behind the mirror as the object is in front.
Convex lens principal rays: parallel → through ; through the centre → straight on; through → parallel.
A convex lens forms a real, inverted image of an object beyond , and a virtual, upright, magnified image of an object inside .
A concave lens always forms a virtual, upright, diminished image between and the lens.
Describe every image by location, orientation, size and type.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.