Lesson 8 of 10 · 20 min

Thermal equilibrium and mixing

Explain how energy flows between two systems until they reach the same temperature, and solve mixing problems by conserving energy, including ones with melting ice.

What you will be able to do

  • Describe thermal equilibrium in terms of temperature and the average kinetic energy of the particles.
  • Explain how energy is transferred between two systems until equilibrium, and link the process to the laws of thermodynamics.
  • Solve mixing problems using energy lost = energy gained, including problems where ice melts.
  • Calculate the percentage error between a predicted and a measured mixture temperature.

Drop a hot metal spoon into a glass of cold water. A minute later the spoon and the water are at the same temperature, somewhere in between. That final temperature is not a matter of chance: it follows from what the particles are doing and from conservation of energy, so you can predict it.

Definition

Thermal equilibrium

Two systems in thermal contact are in thermal equilibrium when there is no net transfer of energy between them. They are then at the same temperature, which means the average kinetic energy of the particles is the same in both.

At the boundary between a hot object and a cold one, the particles of the hot object are, on average, moving faster. When a fast particle collides with a slower one, the slower one usually speeds up and the faster one slows down. So, on average, kinetic energy passes from the hot side to the cold side.

The hot object's particles lose kinetic energy, so its temperature falls; the cold object's particles gain kinetic energy, so its temperature rises. This continues until the average kinetic energies, and so the temperatures, are equal. Individual particles still exchange energy at equilibrium, but the transfers each way balance, so the net transfer is zero.

A can holding 0.200 kg of water at 80 °C stands in 0.300 kg of water at 20 °C, insulated from the room. The temperatures approach each other until equilibrium at 44 °C. The hot water falls 36 K but the cold water rises only 24 K, because it has more mass.

Key idea

Where the laws of thermodynamics come in

  • Zeroth law: if A and B are each in thermal equilibrium with C, they are in thermal equilibrium with each other. That is why a thermometer works: it comes to equilibrium with whatever it touches, so its reading is that object's temperature.
  • First law (conservation of energy): in an isolated system, the energy lost by the hot object equals the energy gained by the cold object.
  • Second law: energy flows spontaneously by heating from the hotter object to the colder one, never the other way, so the temperatures always move towards each other, never apart.
Interactive

Mix hot and cold water

Predict the final temperature before you mix, then check it. What happens to your prediction if you double the mass of the cold water?

Energy lost by the hot object (at T1T_1) = energy gained by the cold object (at T2T_2), with final temperature TT and no losses
m1c1(T1−T)=m2c2(T−T2)m_1 c_1 (T_1 - T) = m_2 c_2 (T - T_2)

Worked example

Mixing hot and cold water

  • Simple familiar

0.200 kg of water at 80.0 °C is mixed with 0.300 kg of water at 20.0 °C in an insulated container. Calculate the final temperature, assuming no energy is lost.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Energy lost by hot = energy gained by cold.

  2. Use mc(Thot−T)m c (T_\text{hot} - T) and mc(T−Tcold)m c (T - T_\text{cold}).

  3. Solve for TT and check it lies between the starting temperatures.

Watch out for

  • Averaging the temperatures (50 °C) without weighting by mass.

  • Writing (T−80.0)(T - 80.0) on the hot side and then equating two quantities of opposite sign.

0.100 kg of water at 90.0 °C is mixed with 0.300 kg of water at 10.0 °C. Assuming no energy is lost, what is the final temperature?

in circC

Give 3 significant figures.

Worked example

A hot copper block dropped into water

  • Complex familiar
  • Technology active

A 0.150 kg copper block at 100 °C is dropped into 0.200 kg of water at 20.0 °C in an insulated cup. The specific heat capacity of copper is 385 J kg−1 K−1385\ \mathrm{J\,kg^{-1}\,K^{-1}}. Ignore the cup. Calculate the final temperature of the water.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Energy lost by the hot object = energy gained by the cold object.

  2. Each side uses its own mass and specific heat capacity.

  3. Expand, collect the TT terms and solve.

Watch out for

  • Cancelling c when the substances are different. It only cancels when both are the same material.

  • Expecting the final temperature to be halfway between 20 °C and 100 °C.

A 0.10 kg copper block at 100 °C is placed in 0.10 kg of water at 20 °C in an insulated container. Copper has c=385 J kg−1 K−1c = 385\ \mathrm{J\,kg^{-1}\,K^{-1}}. Which statement about the final state is correct?

Choose one answer

Common mistake

Mixing-problem traps

  • Averaging the temperatures without weighting by mcmc.
  • Mixing signs: write each side as a positive amount, (Thot−T)(T_\text{hot} - T) and (T−Tcold)(T - T_\text{cold}).
  • Cancelling cc when the two substances are different. It cancels only for the same substance.
  • Assuming all the ice melts. Check first.
  • Forgetting that melted ice must still warm from 0 °C to the final temperature.

Worked example

Cooling a drink with ice from the freezer

  • Complex unfamiliar
  • Technology active

You drop 50.0 g of ice straight from a freezer at −18.0 °C into 300 g of cola at 25.0 °C in an insulated cup. Treat the cola as water and ignore the cup.

(a) Show that all the ice melts.

(b) Calculate the final temperature of the drink.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the energy to warm the ice to 0 °C and melt it.

  2. Compare with the energy the warm liquid releases cooling to 0 °C.

  3. If all the ice melts, include the meltwater warming from 0 °C to TT.

  4. Solve the energy balance.

Watch out for

  • Forgetting the meltwater warming from 0 °C to the final temperature.

  • Using cwc_w for the ice as it warms from −18.0 °C.

  • Assuming the ice is already at 0 °C when it comes from a freezer.

Note

The mixing practical and percentage error

Mix measured masses of hot and cold liquid, predict the final temperature with energy conservation, then measure it. The measured temperature is usually a little below the prediction, because energy is lost to the cup, the thermometer and the air while you pour and stir. Compare them with

percentage error=∣measured−predictedpredicted∣×100 %\text{percentage error} = \left| \frac{\text{measured} - \text{predicted}}{\text{predicted}} \right| \times 100\ \%

To reduce the error, use an insulated cup with a lid, mix and stir quickly, read the maximum temperature, and include the cup's own energy change in the calculation if you know its mass and specific heat capacity.

Energy conservation predicts a mixture temperature of 44.0 °C. The measured temperature is 41.8 °C. Calculate the percentage error, to two significant figures.

in \%

Give 2 significant figures.

Exam tip

Start with the assumption

Begin every mixing answer with a sentence such as "Assuming no energy is lost to the surroundings, energy lost by the hot water = energy gained by the cold water." It earns a mark and makes your working easy to follow. With ice, show the check that all of it melts before you solve for the final temperature.

Summary

  • Systems in thermal equilibrium are at the same temperature, so their particles have the same average kinetic energy, and there is no net energy transfer.

  • Energy passes from hot to cold through particle collisions until the average kinetic energies are equal.

  • Zeroth law: thermometers work. First law: energy lost by the hot object = energy gained by the cold one. Second law: heat flows only from hot to cold.

  • Solve mixing problems with m1c1(T1−T)=m2c2(T−T2)m_1 c_1 (T_1 - T) = m_2 c_2 (T - T_2), adding mLmL terms for any change of state.

  • The final temperature lies closer to the starting temperature of the object with the larger mcmc.

  • Measured mixture temperatures are usually below the prediction because of energy losses; compare them using percentage error.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 100% read

Save your progress with a free account