Lesson 3 of 10 · 16 min

Conduction, convection and radiation

Explain how energy is transferred by conduction, convection and radiation, and apply the ideas to insulation, everyday designs and Earth's climate.

What you will be able to do

  • Explain conduction in terms of collisions between particles and the movement of free electrons.
  • Explain convection in terms of density differences and the bulk movement of a fluid.
  • Explain radiation as energy carried by electromagnetic waves, which need no medium.
  • Apply the three mechanisms to insulation, wet clothing and the energy balance of Earth's climate.

Sit near a campfire. Your face feels warm, even though the air between you and the fire is not flowing towards you. Smoke and sparks rise above the flames. The metal handle of a pan left on the coals becomes too hot to touch.

These are three different ways energy moves from hot places to cooler ones: radiation, convection and conduction. Each one is explained by what particles (or waves) are doing.

All three mechanisms on a stove. The red arrow shows warm water rising; the blue arrows show cooler water sinking.

Definition

Conduction

Energy transfer through a material by collisions between neighbouring particles (and, in metals, by free electrons), without the material itself moving.

At the hot end of a metal rod the particles vibrate faster. They jostle their neighbours, passing on kinetic energy, and those neighbours pass it on in turn. Metals also contain free electrons that move through the whole material, carrying energy quickly from hot regions to cool ones. That is why metals are the best thermal conductors.

In a gas the particles are far apart and collide much less often, so gases conduct very poorly. Still, trapped air is an excellent insulator: wool, foam, feathers, ceiling batts and double glazing all work by holding air still so that it cannot carry energy away by convection.

Interactive

Conduction along a rod

Heat one end of the rod. Then switch to glass: how much more slowly does the far end warm up?

On a cold morning, a metal bench and a wooden bench have been outside all night and are at the same temperature. The metal bench feels much colder to sit on. Why?

Choose one answer

Definition

Convection

Energy transfer by the bulk movement of a fluid (a liquid or a gas). Fluid near a heat source warms, expands and becomes less dense, so it rises. Cooler, denser fluid sinks to take its place, setting up a convection current.

Definition

Radiation

Energy transfer by electromagnetic waves, mostly infrared at everyday temperatures. Radiation needs no medium, so it crosses the vacuum of space. Every object emits it, and hotter objects emit far more. Dark, matt surfaces are good absorbers and good emitters; light, shiny surfaces are good reflectors and poor emitters.

The three mechanisms compared.
MechanismNeeds a medium?How the energy movesMost important in
ConductionYesParticles collide with their neighbours; free electrons move in metalsSolids, especially metals
ConvectionYes, a fluidWarm, less dense fluid rises and cooler, denser fluid sinksLiquids and gases
RadiationNoElectromagnetic waves, mostly infraredEverywhere, including across a vacuum

Worked example

How a vacuum flask keeps a drink hot

  • Complex familiar
  • Technology free

A vacuum flask has a double-walled glass bottle with a vacuum between the walls. The surfaces facing the vacuum are silvered, and the top is closed with a plastic stopper. Explain how each feature reduces energy transfer from the hot drink inside.

A vacuum flask in cross-section.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Identify which mechanism each feature targets.

  2. Explain it with particles (conduction, convection) or electromagnetic waves (radiation).

  3. Say what energy loss is still possible.

Watch out for

  • Saying the vacuum stops radiation. Radiation travels through a vacuum; that is how sunlight reaches Earth.

  • Saying the flask keeps the cold out. Energy flows from hot to cold; the flask slows that flow in either direction.

Which of these are mainly caused by convection? Select all that apply.

Select all that apply.

Note

Why wet clothes make you feel cold

Dry fabric traps a layer of still air next to your skin, and air is a very poor conductor. Soak the fabric and water replaces the air. Water conducts energy more than 20 times as well as air, so energy flows out of your skin much faster.

On top of that, the water evaporates. Every kilogram that evaporates takes more than 2×106 J2 \times 10^6\ \mathrm{J} with it, much of it from your body. You will meet this latent heat of vaporisation in a later lesson.

Note

Heating processes and the climate

Earth absorbs sunlight and emits infrared radiation back towards space. Greenhouse gases such as carbon dioxide, water vapour and methane absorb some of that outgoing infrared and re-emit it in all directions, including back down, so the surface stays warmer than it otherwise would. Burning fossil fuels has raised the concentration of carbon dioxide, so more energy is retained.

Convection in the atmosphere and currents in the oceans carry that energy around the globe. Because water has such a high specific heat capacity, the oceans have absorbed about 90 % of the extra energy. Climate models are built on these heating processes and on conservation of energy, and better satellites, ocean sensors and computers have made their predictions of global temperature steadily more reliable.

Tip

Designing with heat transfer

Many efficient, low-cost technologies are heat-transfer physics applied. Ceiling insulation and double glazing trap still air to cut conduction and convection. Light-coloured roofs reflect summer sunlight. Solar hot water panels use dark absorbers under glass, with insulated pipes and tanks. Passive solar homes use eaves to block the high summer sun while letting low winter sun warm a concrete floor that stores the energy.

Common mistake

"Heat rises" and "the cold gets in"

Heat does not rise: warm fluid rises, because it is less dense. Convection happens only in liquids and gases, never in solids. And cold is not something that flows. Energy always flows from the warmer object to the cooler one.

Exam tip

Explaining a heat transfer

Name the mechanism, describe what the particles or waves are doing, and link it to the result. For example: "The vacuum contains almost no particles, so energy cannot be transferred across it by conduction or convection."

Summary

  • Conduction: particles pass energy to their neighbours by collisions, and free electrons carry it quickly in metals. Gases are poor conductors.

  • Convection: warm fluid becomes less dense and rises while cooler fluid sinks, so the fluid itself carries the energy.

  • Radiation: electromagnetic waves, mostly infrared, carry energy and need no medium. Dark matt surfaces absorb and emit well; shiny surfaces reflect.

  • Insulators work by trapping still air and by blocking all three mechanisms.

  • Greenhouse gases absorb and re-emit outgoing infrared radiation; the oceans store most of the extra energy, which is central to climate predictions.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 100% read

Save your progress with a free account