Physics · Unit 1 · Topic 1

Heating processes

Use the kinetic particle model to explain temperature, heat and internal energy, then solve specific heat, latent heat, thermal equilibrium, first law and efficiency problems with QCAA data and uncertainties.

  • 10 lessons
  • 2 h 46 min of lessons
  • 18 worked examples
  • 15 hours in the syllabus
0 of 10

Start here

The kinetic particle model of matter

Lesson 1 of 10 · 12 min

Start the topic

Lessons

10
  1. The kinetic particle model of matter (up next)

    Describe matter as particles in constant random motion, and use the model to explain the properties of solids, liquids and gases.

  2. Temperature, heat and internal energy

    Distinguish temperature, kinetic energy, thermal energy, internal energy and heat, and convert between degrees Celsius and kelvin.

  3. Conduction, convection and radiation

    Explain how energy is transferred by conduction, convection and radiation, and apply the ideas to insulation, everyday designs and Earth's climate.

  4. Specific heat capacity

    Use Q=mcΔTQ = mc\Delta T to calculate the energy needed to change a substance's temperature, and explain why water is so good at storing and carrying thermal energy.

  5. Measuring specific heat capacity

    Analyse a specific heat capacity experiment, find c from the gradient of a graph, record measurements with uncertainties and evaluate the result with percentage error.

  6. Changes of state and specific latent heat

    Explain why the temperature stays constant while a substance melts or boils, and use Q=mLQ = mL to calculate the energy for a change of state.

  7. Heating curves and multi-stage problems

    Read heating and cooling curves, and calculate the total energy or time needed to take a substance through several temperature changes and changes of state.

  8. Thermal equilibrium and mixing

    Explain how energy flows between two systems until they reach the same temperature, and solve mixing problems by conserving energy, including ones with melting ice.

  9. Internal energy, work and the first law

    Explain how heating and work both change a system's internal energy, apply ΔU=Q+W\Delta U = Q + W with the correct signs, and explain how thermal energy can do mechanical work.

  10. Efficiency and useable energy

    Explain why every real energy transfer loses some energy as heat, calculate efficiencies, and consider what falling useable energy means for the future.

  11. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Everything around you is made of particles that never stop moving. In this topic you use that one idea, the kinetic particle model, to explain what temperature really measures, how energy moves by conduction, convection and radiation, and why melting ice stays at 0 °C while the heater is still on.

Then you put numbers on it: Q=mcΔTQ = mc\Delta T for warming and cooling, Q=mLQ = mL for changes of state, energy conservation for mixing, the first law of thermodynamics ΔU=Q+W\Delta U = Q + W, and efficiency. Along the way you analyse the topic's key experiments (measuring a specific heat capacity and predicting the temperature of a mixture) and report results with uncertainties the way QCAA expects.

Before you start

  • Energy, its units and the idea that energy is conserved when it is transferred or transformed (Year 9–10 science).
  • Solids, liquids and gases described in terms of particles (Years 7–8 science).
  • Rearranging formulas, substituting values, scientific notation and significant figures.
  • Kinetic energy Ek=12mv2E_k = \frac{1}{2}mv^2 and power as energy per second (Year 10 science).

What QCAA says you need to know34 dot points

Kinetic particle model and specific heat capacity

Phase changes and energy conservation

Science as a human endeavour

  • Recognise that the science of heating processes is of key importance to the development of efficient and cost-effective technologies that use sustainable and renewable energy sources.LessonsConduction, convection and radiationEfficiency and useable energy
  • Explore the development of new technologies and understandings of heating processes as a means to predicting global temperatures and the effects of human-induced climate change.LessonConduction, convection and radiation
  • Explore how the need for increases to the efficiency of early steam engines led to further technological advancements (e.g. the internal combustion engine) and scientific advancements (e.g. an understanding of, and mathematical articulation of, the relationship between heating processes and mechanical work).LessonsInternal energy, work and the first lawEfficiency and useable energy
  • Appreciate that different temperature scales (e.g. Celsius, Fahrenheit, Kelvin) were developed at different times to serve different purposes.LessonTemperature, heat and internal energy

Science inquiry

Subject matter from the Physics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Kinetic particle model

    Describe matter as moving particles, and use the model to explain temperature, internal energy, heat and changes of state.

    Practise
  • Temperature and the kelvin scale

    Convert with $T_K = T_C + 273$, handle temperature changes, and explain why scales and common units matter.

    Practise
  • Conduction, convection and radiation

    Explain each mechanism with the particle model or electromagnetic waves, and apply them to insulation, cooking and climate.

    Practise
  • Specific heat capacity

    Solve $Q = mc\Delta T$ for any unknown and explain why water stores and moves so much energy.

    Practise
  • Specific heat experiments

    Plan a specific heat capacity experiment, find c from a graph's gradient and evaluate the method.

    Practise
  • Uncertainty and error

    Record measurements with uncertainties, propagate them, and compare results with accepted values using percentage error.

    Practise
  • Specific latent heat

    Explain why temperature is constant during a change of state, and solve $Q = mL$ problems.

    Practise
  • Heating curves and multi-stage problems

    Read heating curves and total the energy (or time) for several temperature changes and changes of state.

    Practise
  • Mixing and thermal equilibrium

    Explain how systems reach thermal equilibrium, and solve mixing problems with energy lost equal to energy gained.

    Practise
  • The first law of thermodynamics

    Apply $\Delta U = Q + W$ with the correct signs and explain how thermal energy can do mechanical work.

    Practise
  • Efficiency and useable energy

    Calculate efficiencies, explain why energy is always lost as heat, and discuss what that means for future energy use.

    Practise

Worked examples18

All 18

Common mistakes

Saying an object contains heat

Heat is energy in transit because of a temperature difference. An object has internal energy; it gains or loses energy by heating. Write "energy is transferred by heating from the coffee to the air", not "the coffee has a lot of heat".

Adding 273 to a temperature change

A change of 25 °C is a change of 25 K, not 298 K. Only convert actual temperatures with TK=TC+273T_K = T_C + 273.

Leaving the mass in grams

Specific heat capacity and latent heat are per kilogram. 250 g is 0.250 kg0.250\ \mathrm{kg}; using 250 makes the answer 1000 times too big.

Using Q=mcΔTQ = mc\Delta T across a change of state

There is no temperature change while ice melts or water boils, so Q=mcΔTQ = mc\Delta T cannot account for that energy. Split the problem into stages and use Q=mLQ = mL for each change of state.

Using the wrong specific heat capacity

Ice (2.05×1032.05 \times 10^3), water (4.18×1034.18 \times 10^3) and steam (2.00×103 J kg−1 K−12.00 \times 10^3\ \mathrm{J\,kg^{-1}\,K^{-1}}) are different. Match cc to the state in each stage.

Assuming all the ice melts

In a mixing problem with ice, first check whether the warm substance can supply enough energy to melt all of it. If not, the mixture ends at 0 °C with some ice left.

Getting the sign of W wrong

In ΔU=Q+W\Delta U = Q + W, WW is work done on the system. A gas that expands and pushes a piston does work on its surroundings, so WW is negative.

Efficiency over 100 %

An efficiency above 100 % means you have swapped output and input, or used total output instead of useful output. Real devices are always below 100 %.

Mixing up precision and accuracy

A digital thermometer that reads to 0.1 °C is precise, but if it reads 101.4 °C in boiling water at sea level it is not accurate. Precision is about spread and resolution; accuracy is about closeness to the true value.

Rounding part-way through

Keep full values in your calculator between steps (especially in multi-stage and mixing problems) and round only the final answer.

Exam tips

  1. The formula and data book gives TK=TC+273T_K = T_C + 273, Q=mcΔTQ = mc\Delta T, Q=mLQ = mL, ΔU=Q+W\Delta U = Q + W, efficiency, and water's specific and latent heats. Values for other materials are given in the question.

  2. Show the formula, the substitution with units, and the answer with a unit and sensible significant figures (usually three, matching the data).

  3. Convert to SI before substituting: g → kg, kJ → J, minutes → seconds.

  4. In multi-stage problems, write and label one line per stage (warm the ice, melt, warm the water…) and add them at the end. Markers give marks for each stage.

  5. When you explain a change of state, use the key phrases: energy increases the potential energy of the particles, the average kinetic energy stays the same, so the temperature is constant while the internal energy increases.

  6. For ΔU=Q+W\Delta U = Q + W, say in words what the sign of QQ and of WW is before you substitute.

  7. In mixing problems, write energy lost by the hot object = energy gained by the cold object, and state the assumption: no energy lost to the container or surroundings.

  8. Percentage uncertainty is about the spread of your measurements; percentage error compares your result with an accepted value. Questions often ask for both.

  9. "Evaluate a claim" needs a calculation, a comparison with the claim, a judgement, and a limitation or assumption.

Where this shows up

  • Car cooling systems, which use a water-based coolant because water absorbs so much energy per kilogram per kelvin.

  • Solar hot water systems and heat pumps on Queensland roofs, designed around absorption, insulation and energy transfer.

  • Sweating and evaporative coolers, which cool by using the latent heat of vaporisation of water.

  • Climate science: the oceans store most of the extra energy trapped by greenhouse gases, which shapes predictions of global temperature.

  • Energy storage: hot water tanks and molten-salt tanks at solar thermal power stations store energy as internal energy.

  • Power stations, whose cooling towers and cooling water carry away the waste energy that efficiency calculations predict.

  • Building design: ceiling insulation, double glazing, eaves and thermal mass keep homes comfortable with less energy.

  • Cooking, from boiling and steaming to why a steam burn is worse than a hot-water burn.

Save your progress with a free account