Lesson 2 of 10 · 15 min
Temperature, heat and internal energy
Distinguish temperature, kinetic energy, thermal energy, internal energy and heat, and convert between degrees Celsius and kelvin.
What you will be able to do
- Describe thermal energy, temperature, kinetic energy, heat and internal energy, and how they differ.
- Explain that adding or removing energy changes the temperature of a system when there is no change of state.
- Convert temperatures using , and recognise that a temperature change has the same value in kelvin and degrees Celsius.
- Explain why different temperature scales exist and why science uses common units.
Sparks from a sparkler are well above 1000 °C, yet when one lands on your hand it usually does little more than sting. A cup of 80 °C tea spilt on your lap can scald you badly. The sparks are far hotter, so why do they do less harm?
Because temperature is not the same thing as energy. A spark is a tiny speck of metal with very few particles; the tea has an enormous number. This lesson sorts out five words that everyday language blurs together.
Definition
Five words to keep straight
- Kinetic energy: the energy of motion. For a particle, .
- Temperature: a measure of the average kinetic energy of the particles of a substance. It decides which way energy flows: from higher to lower temperature.
- Internal energy (): the total energy of all the particles in a system, which is the kinetic energy of their random motion plus the potential energy stored in the forces between them.
- Thermal energy: the energy a system has because of the random motion of its particles. It is the part of the internal energy that goes up when the temperature goes up.
- Heat (): energy transferred from one system to another because of a temperature difference. Heat is energy on the move.
Temperature
- An average: the average kinetic energy per particle.
- Does not depend on how much substance there is. A spoonful and a bathful of 40 °C water are at the same temperature.
- Measured with a thermometer, in °C or K.
Internal energy
- A total: all the kinetic and potential energy of all the particles.
- Depends on the amount of substance, its temperature and its state.
- Measured in joules. It changes when energy is added or removed by heating or by work.
When you heat a substance and it does not change state, the energy you add goes into the random motion of its particles. They speed up, their average kinetic energy rises, and so the temperature rises. Remove energy and the reverse happens: the particles slow down and the temperature falls.
So a change in temperature (without a change of state) always means energy has been added to or removed from the system. During a change of state the story is different, as you will see in the lesson on latent heat.
Which has more internal energy, a 2-million-kilogram iceberg at −2 °C or a cup of tea at 70 °C?
The Celsius and Kelvin scales. The steps are the same size; only the zero is different.
Key idea
Degrees Celsius and kelvin
The kelvin scale starts at absolute zero: 0 K = −273 °C, the temperature at which the particles would have the least possible kinetic energy. Nothing can be colder, so there are no negative kelvin temperatures.
One kelvin is the same size as one degree Celsius, so converting only shifts the zero:
Write 300 K, not 300 °K.
Worked example
Converting between degrees Celsius and kelvin
(a) Liquid nitrogen boils at −196 °C. Convert this temperature to kelvin.
(b) Mercury freezes at 234 K. Convert this temperature to degrees Celsius.
(c) A cup of tea cools from 85 °C to 22 °C. State the change in temperature in kelvin.
Step 1: Use for part (a)
Step 2: Rearrange for part (b)
Subtracting 273 undoes the conversion. Check the sign makes sense; 234 K is below 273 K (the freezing point of water), so the answer must be below 0 °C.
Step 3: Find the change in part (c)
Step 4: Convert the change
One kelvin is the same size as one degree Celsius, so a change of is a change of . The tea's temperature falls by 63 K.
Both scales have the same step size; they only start from different zeros. Adding 273 to each temperature cancels when you subtract: .
Try it yourself first, then check the working one step at a time.
Answer
(a) 77 K (b) −39 °C (c) the temperature falls by 63 K ().
Method
Temperature: , or .
Temperature change: the number is the same in K and °C. Never add 273 to a change.
Watch out for
Writing the change in (c) as 336 K by adding 273 to 63.
Writing °K. The unit is the kelvin, symbol K.
Normal body temperature is 37 °C. What is this in kelvin?
Common mistake
Temperature changes don't need converting
A temperature change has the same value in both scales. Warming from 15 °C to 40 °C is a change of 25 °C, which is a change of 25 K.
Adding 273 to a change (and writing 298 K) is one of the most common mistakes in this topic. Only convert actual temperatures.
A beaker of water warms from 15 °C to 40 °C. What is its temperature change in kelvin?
History
Why there are different temperature scales
Temperature scales were invented at different times for different jobs. Daniel Fahrenheit's scale (1724) was built around reproducible reference points for his precise mercury thermometers, including a salt–ice mixture he set as 0 and human body temperature. On it, water freezes at 32 °F and boils at 212 °F.
Anders Celsius (1742) used the freezing and boiling points of water, 100 degrees apart. He originally put 100 at freezing; the scale was flipped soon after his death.
A century later William Thomson, Lord Kelvin, proposed an absolute scale (1848) that starts at the coldest possible temperature. Physics uses it because quantities such as the average kinetic energy of particles are proportional to temperature only when it is measured from absolute zero. The United States still uses Fahrenheit for weather and cooking; science everywhere uses kelvin and degrees Celsius.
Note
One set of units for the whole world
The kelvin is one of the seven SI base units, the system of units used by scientists in every country. Common units let researchers share, check and combine data without conversion errors.
When units get mixed, things go wrong. In 1999 NASA lost the Mars Climate Orbiter because one team's software reported thruster impulse in pound-force seconds while the navigation team expected newton seconds. The spacecraft flew far too close to Mars and was lost.
Exam tip
Say it precisely
Markers look for exact language. Write "energy is transferred by heating from the tea to the air", "the internal energy of the water increases" and "temperature is a measure of the average kinetic energy of the particles".
Avoid "the tea contains a lot of heat" and "cold flows into the drink". Both describe heat as a substance, which it is not.
Summary
Temperature measures the average kinetic energy of the particles; internal energy is the total kinetic and potential energy of all of them.
Thermal energy is the energy of the particles' random motion; heat is energy transferred because of a temperature difference.
Adding energy without a change of state raises the temperature; removing it lowers the temperature.
. Absolute zero is 0 K = −273 °C, and there are no negative kelvin temperatures.
A temperature change has the same value in K and °C.
Celsius, Fahrenheit and Kelvin were designed for different purposes; science uses SI units so results can be shared worldwide.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.