Lesson 4 of 10 · 17 min

Specific heat capacity

Use Q=mcΔTQ = mc\Delta T to calculate the energy needed to change a substance's temperature, and explain why water is so good at storing and carrying thermal energy.

What you will be able to do

  • Describe specific heat capacity and state its unit.
  • Solve problems with Q=mcΔTQ = mc\Delta T for any one unknown, using data-book values for water, ice and steam.
  • Compare the energy stored in a small hot object and a large cool one.
  • Explain the properties that make water an ideal engine coolant.

On a summer afternoon at the beach, dry sand can be hot enough to make you hop, yet the sea is still cool. Both have had the same sunshine all day.

The difference is how much energy each kilogram must absorb to warm by one degree. That property is the specific heat capacity, and water's is one of the largest of any common substance.

Interactive

Same heater, different substances

Heat 1 kg of each substance with the same 1000 W heater. Which warms fastest? Which needs the most energy for each kelvin of temperature rise?

Definition

Specific heat capacity

The specific heat capacity cc of a substance is the energy needed to raise the temperature of 1 kg of it by 1 K (or 1 °C). Its unit is J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}}.

For water, cw=4.18×103 J kg−1 K−1c_w = 4.18 \times 10^3\ \mathrm{J\,kg^{-1}\,K^{-1}}: it takes 4180 J to warm 1 kg of water by 1 K.

Energy to change the temperature of a substance (no change of state)
Q=mcΔTQ = mc\Delta T

Here QQ is the energy transferred (J), mm is the mass (kg), cc is the specific heat capacity (J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}}) and ΔT=Tfinal−Tinitial\Delta T = T_\text{final} - T_\text{initial} is the temperature change (K or °C).

When the substance warms, ΔT\Delta T and QQ are positive: energy is absorbed. When it cools, both are negative: energy is released. The energy goes into (or comes out of) the random motion of the particles, which is why the temperature changes. The equation holds only while there is no change of state.

Typical specific heat capacities. Only water, ice and steam are in the QCAA formula and data book; any other value you need will be given in the question.
SubstanceSpecific heat capacity (J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}})
Water (liquid)4.18×1034.18 \times 10^3 (data book)
Ice2.05×1032.05 \times 10^3 (data book)
Steam2.00×1032.00 \times 10^3 (data book)
Ethanolabout 2.4×1032.4 \times 10^3
Aluminiumabout 900
Glassabout 840
Dry sandabout 800
Ironabout 450
Copperabout 385
Leadabout 130

Worked example

Energy to heat water in a kettle

  • Simple familiar
  • Technology active

Calculate the energy needed to heat 1.50 kg of water from 22.0 °C to 100.0 °C. Give your answer to three significant figures.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Write the data with units, using cwc_w from the data book.

  2. ΔT=Tf−Ti\Delta T = T_f - T_i.

  3. Substitute into Q=mcΔTQ = mc\Delta T, then round to the data's significant figures.

Watch out for

  • Using the final temperature (100 °C) instead of the change (78.0 °C).

  • Using c=4.18c = 4.18 instead of 4.18×1034.18 \times 10^3, which gives an answer 1000 times too small.

How much energy is needed to warm 0.500 kg of water by 10.0 K? Give your answer in kJ to three significant figures.

in kJ

Give 3 significant figures.

A 2.00 kg aluminium block at 20.0 °C absorbs 36.0 kJ of energy. Aluminium has c=900 J kg−1 K−1c = 900\ \mathrm{J\,kg^{-1}\,K^{-1}}. What is its final temperature?

in circC

Give 3 significant figures.

Common mistake

Three ways to lose the mark

  1. Leaving the mass in grams: 250 g is 0.250 kg.
  2. Using a temperature instead of a temperature change: heating from 20 °C to 80 °C is ΔT=60 K\Delta T = 60\ \mathrm{K}.
  3. Using c=4.18c = 4.18 instead of 4.18×103 J kg−1 K−14.18 \times 10^3\ \mathrm{J\,kg^{-1}\,K^{-1}}.

A large mass at a modest temperature can hold far more internal energy than a small, very hot object, because internal energy is a total over all the particles. The syllabus asks you to compare a cup of coffee with a swimming pool, so here are the numbers.

Worked example

A cup of coffee versus a swimming pool

  • Complex unfamiliar
  • Technology active

A cup holds 0.250 kg of coffee at 80.0 °C. A backyard pool holds 4.00×104 kg4.00 \times 10^4\ \mathrm{kg} of water at 26.0 °C. One evening the air is at 18.0 °C and both cool to the air temperature. Treat coffee as water.

(a) Which has the higher temperature to start with?

(b) Calculate the energy each releases as it cools to 18.0 °C.

(c) Use your results to explain the difference between temperature and internal energy.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Use Q=mcΔTQ = mc\Delta T for each object with its own mass and ΔT\Delta T.

  2. Compare with a ratio.

  3. Explain with average (temperature) versus total (internal energy).

Watch out for

  • Concluding that the hotter object always has more energy. Mass matters as much as temperature.

  • Losing the power of ten in 4.00×1044.00 \times 10^4 or 4.18×1034.18 \times 10^3.

Equal masses of copper (c=385 J kg−1 K−1c = 385\ \mathrm{J\,kg^{-1}\,K^{-1}}) and water absorb the same amount of energy. Which statement is correct?

Choose one answer

Note

Why engines are cooled with water

A car engine wastes most of its fuel energy as heat, and much of that must be carried away by the coolant. Water is ideal:

  • Its specific heat capacity is among the highest of all common liquids, so each kilogram absorbs a lot of energy for a small temperature rise.
  • It stays liquid over a wide temperature range, and if it does start to boil, its very large latent heat of vaporisation absorbs a great deal of energy.
  • It is cheap, widely available, non-toxic, non-flammable and flows easily.

Engine coolant is water mixed with antifreeze such as ethylene glycol, which lowers the freezing point, raises the boiling point and reduces corrosion.

Exam tip

Set it out in three lines

Write the formula, then the substitution with units (using cwc_w from the formula and data book), then the answer with a unit, rounded to the same number of significant figures as the least precise data, usually three. If the question gives values in g or kJ, convert them first.

Summary

  • Specific heat capacity is the energy needed to raise the temperature of 1 kg of a substance by 1 K, in J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}}.

  • Q=mcΔTQ = mc\Delta T, with mm in kg and ΔT=Tfinal−Tinitial\Delta T = T_\text{final} - T_\text{initial}. Positive QQ means energy absorbed; negative means released.

  • For the same energy and mass, a substance with a smaller cc has a larger temperature change.

  • Data book values: cw=4.18×103c_w = 4.18 \times 10^3, ci=2.05×103c_i = 2.05 \times 10^3 and cs=2.00×103 J kg−1 K−1c_s = 2.00 \times 10^3\ \mathrm{J\,kg^{-1}\,K^{-1}}.

  • A large, cool mass of water can store far more internal energy than a small, hot one.

  • Water's high specific heat capacity, wide liquid range and safety make it an excellent coolant.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 4 of 100% read

Save your progress with a free account