Lesson 5: Measuring specific heat capacity
Finding specific heat capacity from a temperature–time graph
SkillsSpecific heat experimentsUncertainty and error
Worked example
A student heats an insulated 1.00 kg aluminium block with a 50.0 W heater and records its temperature every 60 s. The graph shows the data and the line of best fit, which passes through (0 s, 21.0 °C) and (600 s, 52.2 °C).
(a) Determine the gradient of the line of best fit.
(b) Determine the specific heat capacity of aluminium from the experiment.
(c) The accepted value is . Calculate the percentage error and explain the direction of the error.
Step 1: Calculate the gradient
Use two points on the line of best fit, not two data points, so that the gradient uses all the data.
Step 2: Connect the gradient to the physics
In time the heater supplies , so and
The gradient equals , so .
Writing the gradient in terms of the formula tells you exactly how to get out of it.
Step 3: Calculate c
Step 4: Calculate the percentage error
Step 5: Explain the direction
Some of the heater's energy escapes to the surroundings, so the block warms less than it would if all the energy stayed in it. A smaller gradient gives a larger calculated . Heat loss is a systematic error: it always pushes the result above the true value, and repeating the experiment does not remove it.
Answer
(a) (b) (c) 6.8 %; the measured value is too high because energy is lost to the surroundings.
Try a similar one
A fresh question of the same kind, checked as you answer, with hints and a full solution.
Temperature of the aluminium block while the 50.0 W heater is on.
Method
Take the gradient from two well-separated points on the line of best fit.
Match the gradient to the formula: for a T–t graph, gradient = P/(mc).
Rearrange for c, then compare with the accepted value.
Watch out for
Using one data point, such as with the temperature instead of the temperature change.
Saying the error is "human error". Name the physical cause: energy lost to the surroundings.