Physics · Unit 3 · Topic 2

Electromagnetism

Coulomb's law and electric fields, magnetic fields of wires, solenoids and magnets, forces on currents and moving charges, electromagnetic induction, transformers and electromagnetic waves.

  • 12 lessons
  • 3 h 20 min of lessons
  • 22 worked examples
  • 23 hours in the syllabus
0 of 12

Start here

Electric charge and Coulomb's law

Lesson 1 of 12 · 16 min

Start the topic

Lessons

12
  1. Electric charge and Coulomb's law (up next)

    Describe the force between two point charges and calculate it with Coulomb's law, including the net force on a charge from two others along a line.

  2. Electric fields and field strength

    Describe electric fields with field lines, calculate field strength with E=FqE = \frac{F}{q} and E=kqr2E = \frac{kq}{r^2}, and combine the fields of two point charges.

  3. Electrical potential energy and work in a field

    Calculate the work done moving a charge in an electric field with V=ΔUqV = \frac{\Delta U}{q}, and use energy conservation to find the speed of a charge accelerated through a potential difference.

  4. Magnetic fields and field lines

    Describe magnetic fields, explain how moving charges create them, and sketch the field lines of magnets, straight wires, solenoids and moving charges using the right-hand grip rule.

  5. Calculating magnetic fields: wires and solenoids

    Calculate the magnetic field around a straight wire and inside a solenoid, combine the fields of two wires, and interpret data on how a magnet's field changes with distance.

  6. Force on a current-carrying wire

    Describe and calculate the force on a current-carrying wire in a magnetic field with F=BILsin⁡θF = BIL\sin\theta and the right-hand palm rule, interpret current-balance data and explain how a DC motor turns.

  7. Force on moving charges

    Calculate the magnetic force on a moving charge with F=qvBsin⁡θF = qvB\sin\theta, find its direction for positive and negative charges, and explain why a charge moving across a uniform field travels in a circle.

  8. Magnetic flux

    Describe magnetic flux and flux density, and calculate the flux through a loop at any angle with ϕ=BAcos⁡θ\phi = BA\cos\theta, measuring θ\theta from the normal to the loop.

  9. Electromagnetic induction: Faraday's and Lenz's laws

    Explain electromagnetic induction, calculate induced EMF with emf=−NΔϕΔt\text{emf} = -N\frac{\Delta\phi}{\Delta t}, and use Lenz's law and conservation of energy to find the direction of induced currents.

  10. Moving conductors and AC generators

    Describe how an EMF is induced across a conductor moving through a magnetic field, calculate it from the area it sweeps out, and explain how an AC generator produces an alternating EMF.

  11. Transformers and power transmission

    Explain how a transformer works using Faraday's law, solve problems with the turns ratio and IpVp=IsVsI_pV_p = I_sV_s, and explain why electricity is transmitted at high voltage.

  12. Electromagnetic waves

    Describe an electromagnetic wave as oscillating electric and magnetic fields produced by oscillating charges, explain how antennas send and receive them, and use c=fλc = f\lambda across the spectrum.

  13. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Almost every electrical technology you use relies on a handful of field ideas. Charges push and pull through an electric field. Moving charges make magnetic fields, and magnetic fields push on moving charges, which is how a motor turns. A changing magnetic field makes an EMF, which is how a generator, a transformer and a wireless charger work. Put a changing electric field and a changing magnetic field together and you get light, radio and every other electromagnetic wave.

In this topic you will calculate electric forces and fields with F=kQqr2F = \frac{kQq}{r^2} and E=kqr2E = \frac{kq}{r^2}, track energy with V=ΔUqV = \frac{\Delta U}{q}, find magnetic fields around wires and inside solenoids, use the right-hand rules to get directions, and apply Faraday's and Lenz's laws to generators, transformers and the power grid. It finishes with how oscillating charges in an antenna send out electromagnetic waves.

Before you start

Builds on Electrical circuits, Linear motion and force, Waves and Gravity and motion.

  • Charge, current, potential difference, resistance and power in circuits: I=qtI = \frac{q}{t}, V=WqV = \frac{W}{q}, V=IRV = IR and P=VIP = VI (Unit 1).
  • Newton's laws, work W=FsW = Fs and kinetic energy Ek=12mv2E_k = \frac{1}{2}mv^2 (Unit 2).
  • Transverse waves and the wave equation v=fλv = f\lambda (Unit 2).
  • Uniform circular motion with Fnet=mv2rF_{net} = \frac{mv^2}{r}, and the idea of a gravitational field (Unit 3, Topic 1).
  • Scientific notation, SI prefixes (nano, micro, milli, kilo, mega, giga) and resolving vectors into perpendicular components.

What QCAA says you need to know33 dot points

Electrostatics

Magnetic fields

Electromagnetic induction

Science as a human endeavour

Science inquiry

Subject matter from the Physics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Coulomb's law

    Describe the force between point charges and calculate it, including the net force from several charges.

    Practise
  • Electric field strength

    Describe electric fields with field lines and calculate field strength from E = F/q and E = kq/r², including combined fields.

    Practise
  • Work and potential in electric fields

    Use V = ΔU/q to find the work done moving a charge, the energy gained by accelerated charges and their speed.

    Practise
  • Sketching magnetic fields

    Describe magnetic fields and sketch field lines for magnets, wires, solenoids and moving charges using the right-hand grip rule.

    Practise
  • Fields of wires and solenoids

    Calculate B around a straight wire and inside a solenoid, combine fields, and interpret field-strength data at different distances.

    Practise
  • Force on a current-carrying wire

    Calculate the force on a wire with F = BIL sin θ, find its direction with the right-hand palm rule, and interpret current-balance data.

    Practise
  • Force on moving charges

    Calculate F = qvB sin θ, find its direction for positive and negative charges, and analyse circular paths in a magnetic field.

    Practise
  • Magnetic flux

    Calculate the flux through a loop at any angle with φ = BA cos θ and relate flux to flux density.

    Practise
  • Faraday's and Lenz's laws

    Calculate induced EMF from a change in flux, find the direction of induced currents, and link Lenz's law to conservation of energy.

    Practise
  • Moving conductors and generators

    Describe and calculate the EMF across a moving conductor and explain the alternating EMF of an AC generator.

    Practise
  • Transformers and power transmission

    Explain transformers with Faraday's law, solve problems with the turns ratio and IpVp = IsVs, and analyse transmission losses.

    Practise
  • Electromagnetic waves

    Describe electromagnetic waves, explain how oscillating charges produce them, and use c = fλ across the spectrum.

    Practise

Worked examples22

All 22

Common mistakes

Forgetting to square the distance or convert units

In F=kQqr2F = \frac{kQq}{r^2} and E=kqr2E = \frac{kq}{r^2} the distance is squared, in metres. Convert μC→10−6 C\mu\mathrm{C} \to 10^{-6}\ \mathrm{C}, nC→10−9 C\mathrm{nC} \to 10^{-9}\ \mathrm{C} and cm→10−2 m\mathrm{cm} \to 10^{-2}\ \mathrm{m} before you substitute.

Using signs to find a direction

Substitute the sizes of the charges. Get the direction separately: like charges repel, unlike charges attract, and fields point away from positive charges.

Treating a wire's field as inverse square

The field around a straight wire falls as 1r\frac{1}{r}, not 1r2\frac{1}{r^2}. Doubling the distance halves BB.

Using N instead of n for a solenoid

In B=μ0nIB = \mu_0 nI, nn is turns per metre: n=NLn = \frac{N}{L}. A 500-turn coil 0.25 m long has n=2000 m−1n = 2000\ \mathrm{m^{-1}}.

Measuring the flux angle from the wrong line

In ϕ=BAcos⁡θ\phi = BA\cos\theta, θ\theta is measured from the normal to the loop. If you are given the angle between the field and the plane of the loop, use 90∘90^\circ minus it.

Forgetting to reverse the force for negative charges

The right-hand palm rule gives the force on positive charges (conventional current). For an electron the force is in the opposite direction.

Thinking a magnetic force speeds a charge up

The magnetic force on a moving charge is always perpendicular to its velocity, so it does no work. It changes the direction of motion, never the speed.

Confusing flux with change in flux

An EMF is induced only while the flux is changing. A large steady flux induces nothing; a generator coil has its largest EMF when the flux through it is zero but changing fastest.

Thinking a transformer makes energy

A step-up transformer increases the voltage but decreases the current by the same factor: IpVp=IsVsI_pV_p = I_sV_s at best. Transformers also need AC; a steady DC current gives no changing flux.

Mixing up the electron and proton masses

Use me=9.11×10−31 kgm_e = 9.11 \times 10^{-31}\ \mathrm{kg} for an electron and mp=1.67×10−27 kgm_p = 1.67 \times 10^{-27}\ \mathrm{kg} for a proton, and remember the square root in v=2qVmv = \sqrt{\frac{2qV}{m}}.

Exam tips

  1. Use the formula book's constants as given: k=9×109 N m2 C−2k = 9 \times 10^{9}\ \mathrm{N\,m^2\,C^{-2}}, μ0=4π×10−7 T m A−1\mu_0 = 4\pi \times 10^{-7}\ \mathrm{T\,m\,A^{-1}}, e=−1.6×10−19 Ce = -1.6 \times 10^{-19}\ \mathrm{C} and c=3×108 m s−1c = 3 \times 10^{8}\ \mathrm{m\,s^{-1}}.

  2. Forces and fields are vectors: a magnitude without a direction usually loses a mark. Say "towards the −2 μC-2\ \mu\mathrm{C} charge", "up the page" or "into the page", and name the rule you used.

  3. Convert to SI units before substituting: cm to m, cm2\mathrm{cm^2} to m2\mathrm{m^2} (1 cm2=10−4 m21\ \mathrm{cm^2} = 10^{-4}\ \mathrm{m^2}), mT to T, kV to V, μC\mu\mathrm{C} to C.

  4. Give answers to the significant figures of the least precise data (usually two or three), and keep full calculator values until the last step.

  5. For "explain" questions on Lenz's law and transformers, write a chain of cause and effect: changing current, changing field, changing flux, induced EMF, and name the law at each step.

  6. In data questions, linearise: plot the quantity that should give a straight line (for example FF against II, or BB against 1r\frac{1}{r}) and use the gradient, with its units.

  7. Field-line sketches need arrows, field lines that never cross, closer spacing where the field is stronger, and the direction from the right-hand grip rule.

  8. In "show that" questions, write every substitution with its units, then the result to one more significant figure than the value you are showing.

Where this shows up

  • Electric motors in electric cars, drills and fans use the force on current-carrying coils in a magnetic field.

  • Power stations and wind turbines spin generators, and transformers step the voltage up for transmission and down again for homes.

  • MRI scanners use superconducting solenoids carrying hundreds of amperes to make fields of 1.5 T to 3 T.

  • Mass spectrometers bend ions in magnetic fields to sort them by mass, which is how radiocarbon dating counts carbon-14 atoms.

  • The Australian Synchrotron in Melbourne steers electrons around its storage ring with bending magnets.

  • Induction cooktops and wireless phone chargers use a changing magnetic flux to induce currents.

  • Radio, Wi-Fi and mobile phones send and receive electromagnetic waves with oscillating charges in antennas.

  • The Square Kilometre Array in Western Australia and South Africa detects faint radio waves from the early universe.

Save your progress with a free account