Lesson 3 of 12 · 16 min

Electrical potential energy and work in a field

Calculate the work done moving a charge in an electric field with V=ΔUqV = \frac{\Delta U}{q}, and use energy conservation to find the speed of a charge accelerated through a potential difference.

What you will be able to do

  • Describe electrical potential energy and potential difference in an electric field.
  • Calculate the work done moving a charge through a potential difference with V=ΔUqV = \frac{\Delta U}{q}.
  • Find the kinetic energy and speed of a charge accelerated from rest through a potential difference.

Lift a book and you do work against gravity; the book gains gravitational potential energy, which it gives back as kinetic energy if it falls. Charges in an electric field behave the same way.

Push a positive charge against an electric field and you store electrical potential energy. Let it go and the field accelerates it, turning that stored energy into kinetic energy. Electron guns, X-ray tubes and the first stage of every particle accelerator work like this.

Definition

Electrical potential energy and potential difference

Electrical potential energy, UU, is the energy a charge has because of its position in an electric field.

The potential difference between two points is the change in electrical potential energy per unit charge moved between them, measured in volts: 1 V=1 J C−11\ \mathrm{V} = 1\ \mathrm{J\,C^{-1}}.

The work done moving charge qq through a potential difference VV equals the change in its electrical potential energy.
V=ΔUq⟺ΔU=qVV = \frac{\Delta U}{q} \qquad\Longleftrightarrow\qquad \Delta U = qV

This is the relationship V=WqV = \frac{W}{q} you used for circuits in Unit 1. There a cell does work on every coulomb it pushes round the circuit. Here something (your hand, or the field itself) does work on a charge moved between two points in a field.

Between parallel plates the field is uniform, so a charge feels the same force F=qEF = qE everywhere between them.

Interactive

Charges between parallel plates

Release a positive charge and then an electron. Which plate does each head for? How does raising the voltage change the energy each one gains?

Which way does the energy go? A positive charge moving with the field, from the positive plate towards the negative plate, loses potential energy: the field does the work and the charge speeds up. Moving it against the field takes work, which is stored as potential energy.

For a negative charge everything reverses. An electron is pushed against the field, so it gains kinetic energy as it moves towards the positive plate.

How much work is needed to move a +3.0 μC+3.0\ \mu\mathrm{C} charge through a potential difference of 250 V250\ \mathrm{V}?

in J

Give 2 significant figures.

Worked example

Work done moving a charge against a uniform field

  • Simple familiar
  • Technology active

Two parallel plates produce a uniform electric field of 5.0×104 N C−15.0 \times 10^{4}\ \mathrm{N\,C^{-1}}. A +2.0 μC+2.0\ \mu\mathrm{C} charge is moved 4.0 cm4.0\ \mathrm{cm} directly against the field. Calculate:

(a) the force needed to move it at constant speed

(b) the work done on the charge

(c) the potential difference between its start and end points.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. In a uniform field the force on a charge is constant: F=qEF = qE.

  2. Work done against the field, W=FsW = Fs, becomes electrical potential energy ΔU\Delta U.

  3. The potential difference is the energy change per coulomb, V=ΔUqV = \frac{\Delta U}{q}.

Watch out for

  • Leaving the distance in centimetres: 4.0 cm=0.040 m4.0\ \mathrm{cm} = 0.040\ \mathrm{m}.

Uniform fields: V=EdV = Ed

In the uniform field between parallel plates the force F=qEF = qE is the same everywhere, so the work done moving a charge a distance dd along the field is W=Fd=qEdW = Fd = qEd. Dividing by qq:

V=EdorE=VdV = Ed \qquad\text{or}\qquad E = \frac{V}{d}

This isn't in the formula book, but you can always rebuild it from E=FqE = \frac{F}{q}, W=FsW = Fs and V=ΔUqV = \frac{\Delta U}{q}, as the worked example does. It also shows why the units N C−1\mathrm{N\,C^{-1}} and V m−1\mathrm{V\,m^{-1}} are the same.

Definition

The electronvolt

An electron or proton accelerated through 1 V1\ \mathrm{V} gains (1.6×10−19 C)(1 V)=1.6×10−19 J(1.6 \times 10^{-19}\ \mathrm{C})(1\ \mathrm{V}) = 1.6 \times 10^{-19}\ \mathrm{J}. This is one electronvolt:

1 eV=1.60×10−19 J1\ \mathrm{eV} = 1.60 \times 10^{-19}\ \mathrm{J}

A proton accelerated through 5000 V5000\ \mathrm{V} gains 5000 eV5000\ \mathrm{eV}, or 5.0 keV5.0\ \mathrm{keV}. Particle physicists measure energies in eV, keV, MeV and GeV.

A proton is accelerated from rest through a potential difference of 500 V500\ \mathrm{V}. How much kinetic energy does it gain, in joules?

in J

Give 2 significant figures.

If a charge starts from rest and only the electric force does work on it, all of the potential energy it loses becomes kinetic energy:

qV=12mv2⇒v=2qVmqV = \tfrac{1}{2}mv^2 \qquad\Rightarrow\qquad v = \sqrt{\frac{2qV}{m}}

The formula book gives Ek=12mv2E_k = \frac{1}{2}mv^2 and V=ΔUqV = \frac{\Delta U}{q} separately; this is the two of them combined.

Worked example

Speed of an electron from an electron gun

  • Complex familiar
  • Technology active

In an electron gun, electrons start from rest and are accelerated through a potential difference of 2.0 kV2.0\ \mathrm{kV}. Calculate:

(a) the kinetic energy each electron gains, in joules and in electronvolts

(b) the electrons' final speed.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Energy gained: ΔU=qV\Delta U = qV.

  2. From rest, ΔU=12mv2\Delta U = \frac{1}{2}mv^2, so v=2qVmv = \sqrt{\frac{2qV}{m}}.

  3. Use the electron or proton mass from the formula book, as appropriate.

Watch out for

  • Using the proton mass for an electron (or the reverse).

  • Forgetting the square root, which gives a "speed" of 7.0×10147.0 \times 10^{14}, faster than light.

An electron is released from rest midway between two charged parallel plates. Which statement is correct?

Choose one answer

Common mistake

Slips that cost marks

  • Using the proton mass for an electron, or the reverse (me=9.11×10−31 kgm_e = 9.11 \times 10^{-31}\ \mathrm{kg}, mp=1.67×10−27 kgm_p = 1.67 \times 10^{-27}\ \mathrm{kg}).
  • Forgetting the square root in v=2qVmv = \sqrt{\frac{2qV}{m}}.
  • Leaving kilovolts as volts: 2.0 kV=2.0×103 V2.0\ \mathrm{kV} = 2.0 \times 10^{3}\ \mathrm{V}.

Exam tip

Show the energy principle

When a question asks for a speed, write the principle first: "the electrical potential energy lost equals the kinetic energy gained, qV=12mv2qV = \frac{1}{2}mv^2." That line often earns a method mark on its own. Keep the unrounded energy in your calculator for the next step.

Summary

  • Potential difference is the change in electrical potential energy per coulomb: V=ΔUqV = \frac{\Delta U}{q}, so the work done moving a charge is ΔU=qV\Delta U = qV.

  • Positive charges lose potential energy moving with the field; negative charges lose it moving against the field.

  • 1 eV=1.60×10−19 J1\ \mathrm{eV} = 1.60 \times 10^{-19}\ \mathrm{J}, the energy one electron gains through 1 V1\ \mathrm{V}.

  • A charge accelerated from rest gains qV=12mv2qV = \frac{1}{2}mv^2, so v=2qVmv = \sqrt{\frac{2qV}{m}}.

  • In a uniform field you can find the work from W=FsW = Fs with F=qEF = qE.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 120% read

Save your progress with a free account