Lesson 2 of 12 · 17 min

Electric fields and field strength

Describe electric fields with field lines, calculate field strength with E=FqE = \frac{F}{q} and E=kqr2E = \frac{kq}{r^2}, and combine the fields of two point charges.

What you will be able to do

  • Describe an electric field and electric field strength, and interpret field-line diagrams.
  • Calculate electric field strength with E=FqE = \frac{F}{q} and E=kqr2E = \frac{kq}{r^2}, including its direction.
  • Find the combined field of two point charges at a point on the line joining them.

How does one charge "know" another is there, with nothing between them? Physicists answer with a field. A charge sets up an electric field in the space around it, and any other charge placed in that field feels a force.

You met the same idea with gravity in the previous topic: Earth makes a gravitational field, and a mass placed in it feels a force F=mgF = mg, where gg is the field strength. An electric field does the same job for charges.

Definition

Electric field and field strength

An electric field is a region in which a charge experiences an electric force.

The electric field strength at a point is the force per unit positive charge placed there:

E=FqE = \frac{F}{q}

measured in newtons per coulomb (N C−1\mathrm{N\,C^{-1}}). The direction of EE is the direction of the force on a positive charge.

The field of a single point charge is radial: outward from a positive charge, inward towards a negative one.

Field lines are the map of a field. They follow these rules:

  • they start on positive charges and end on negative charges
  • the arrow on a line shows the direction of the force on a positive charge
  • they never cross, because the field has only one direction at each point
  • closer lines mean a stronger field
  • between two oppositely charged parallel plates the lines are straight, parallel and evenly spaced: the field there is uniform.
Interactive

Field lines of two charges

Start with a positive and a negative charge. Then make both positive: where between them does the field vanish? Finally make one charge three times the other and see where the lines crowd together.

Which statement about electric field lines is correct?

Choose one answer

If you know the force on a test charge, E=FqE = \frac{F}{q} gives the field. Turned round, F=qEF = qE gives the force on any charge placed in a known field. A positive charge is pushed along the field; a negative charge, such as an electron, is pushed against it.

A −2.0 nC-2.0\ \mathrm{nC} charge at point P experiences a force of 6.0×10−5 N6.0 \times 10^{-5}\ \mathrm{N} due east. Calculate the size of the electric field strength at P.

in N C -1

Give 2 significant figures.

For an isolated point charge you can do better than measuring forces. Combining E=FqE = \frac{F}{q} with Coulomb's law gives the field at any distance from the charge.

Field strength at distance rr from a point charge qq. It points away from a positive charge and towards a negative one.
E=14πε0qr2=kqr2E = \frac{1}{4\pi\varepsilon_0}\frac{q}{r^2} = \frac{kq}{r^2}
Where E=kqr2E = \frac{kq}{r^2} comes from

Place a small positive test charge q0q_0 at distance rr from charge qq. Coulomb's law gives the force on it:

F=kqq0r2F = \frac{kqq_0}{r^2}

The field is the force per unit test charge:

E=Fq0=kqr2E = \frac{F}{q_0} = \frac{kq}{r^2}

The test charge cancels out. That is the point of a field: it belongs to qq, and it is there whether or not another charge is present to feel it.

The formula book writes E=FqE = \frac{F}{q} and E=kqr2E = \frac{kq}{r^2} with the same letter qq, but they are different charges: in Fq\frac{F}{q} it is the charge feeling the force, and in kqr2\frac{kq}{r^2} it is the charge making the field.

Worked example

Field of a point charge and the force on an electron

  • Simple familiar
  • Technology active

(a) Calculate the electric field strength 20 cm20\ \mathrm{cm} from a +5.0 μC+5.0\ \mu\mathrm{C} point charge.

(b) An electron is placed at that point. Calculate the force on it and state its direction.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Use E=kqr2E = \frac{kq}{r^2} with the source charge and the distance in metres.

  2. The field points away from a positive source and towards a negative one.

  3. Use F=qEF = qE for any charge placed in the field; reverse the direction for a negative charge.

Watch out for

  • Using the electron's charge in E=kqr2E = \frac{kq}{r^2}. The field is made by the source charge; the electron only feels it.

With two or more charges, find each charge's field at the point and add them as vectors. Between a positive and a negative charge, both fields point towards the negative charge, so they add. Between two like charges, the fields point in opposite directions and partly cancel, so somewhere between them the field is zero.

Charges of +4.0 μC+4.0\ \mu\mathrm{C} and −2.0 μC-2.0\ \mu\mathrm{C} are 30 cm30\ \mathrm{cm} apart. Calculate the size of the electric field at the midpoint between them, to two significant figures.

in N C -1

Give 2 significant figures.

Worked example

Where the field of two charges is zero

  • Complex familiar
  • Technology active

Point charges of +1.0 μC+1.0\ \mu\mathrm{C} and +4.0 μC+4.0\ \mu\mathrm{C} are 60 cm60\ \mathrm{cm} apart. Find the point on the line between them where the electric field is zero.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Check the two fields point in opposite directions in the region you are searching.

  2. Write the two field strengths in terms of one unknown distance and set them equal.

  3. Cancel common factors and take square roots.

Watch out for

  • Expecting the zero point at the midpoint. It is always closer to the smaller charge.

  • Looking between a positive and a negative charge, where both fields point the same way and can never cancel.

Common mistake

Which charge goes in the formula?

In E=kqr2E = \frac{kq}{r^2}, qq is the charge making the field, not a charge placed in it. The field at a point exists even if nothing is there. Only when you then want the force on a particular charge do you use its charge, in F=qEF = qE.

Exam tip

Direction is part of the answer

Electric field strength is a vector, so give a direction: "away from the +5.0 μC+5.0\ \mu\mathrm{C} charge", "towards B" or "to the left". When fields combine, draw an arrow for each field at the point before you add them; markers look for it.

Summary

  • An electric field is a region where a charge feels an electric force. Its strength is the force per unit positive charge, E=FqE = \frac{F}{q}, in N C−1\mathrm{N\,C^{-1}}.

  • Field lines start on positive charges, end on negative charges, never cross and are closer where the field is stronger. Between parallel plates the field is uniform.

  • A point charge makes a radial field E=kqr2E = \frac{kq}{r^2}: away from positive charges, towards negative ones.

  • A charge in a field feels F=qEF = qE: along the field if positive, against it if negative.

  • Fields from several charges add as vectors. Between two like charges there is a point where the field is zero, closer to the smaller charge.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 120% read

Save your progress with a free account