Lesson 2 of 14 · 18 min

Naming alkanes, alkenes and alkynes

Apply the IUPAC rules to name branched alkanes, alkenes and alkynes up to ten carbons, and draw the structure that a name describes.

What you will be able to do

  • Find the longest carbon chain, even when a drawing hides it around a corner.
  • Number the chain to give the double or triple bond, then the branches, the lowest locants.
  • Name methyl and ethyl branches with locants, multiplying prefixes and alphabetical order.
  • Draw the displayed structural formula of a hydrocarbon from its name.

There are 75 different alkanes with the formula CX10HX22\ce{C10H22}. A name like "decane isomer number 41" would tell you nothing, so chemists use the IUPAC rules: a name built so that anyone can draw exactly one structure from it, and every structure has exactly one name.

Every IUPAC name has the same three parts.

The anatomy of a name: 3-methylpent-1-ene.
3-methyl⏟prefix (branches)  pent⏟stem (chain length)  -1-ene⏟suffix (group)\underbrace{\text{3-methyl}}_{\text{prefix (branches)}}\;\underbrace{\text{pent}}_{\text{stem (chain length)}}\;\underbrace{\text{-1-ene}}_{\text{suffix (group)}}

Naming a branched alkane

  1. Find the longest continuous chain

    Trace every path from one end carbon to another. The longest gives the stem (meth-, eth-, prop-, but-, pent-, hex-, hept-, oct-, non-, dec-). Drawings often bend the chain, so a "branch" may really be part of it.

  2. Name the branches

    −CHX3\ce{-CH3} is methyl and −CHX2CHX3\ce{-CH2CH3} is ethyl.

  3. Number the chain from the end nearer a branch

    Choose the direction that gives the lowest set of locants; compare at the first point of difference (2,4 beats 3,5).

  4. Assemble the name

    Branches in alphabetical order (ethyl before methyl), di-, tri-, tetra- for repeats (ignored when alphabetising), one locant per branch, commas between numbers, hyphens between numbers and letters: 3-ethyl-2,2-dimethylpentane.

Condensed formulas and exam drawings often hide the longest chain. CHX3CH(CHX2CHX3)CHX2CH(CHX3)CHX3\ce{CH3CH(CH2CH3)CH2CH(CH3)CH3} reads like a five-carbon chain with an ethyl and a methyl branch, but trace the path through the ethyl group and you get six carbons in a row. Drawn with that chain straight, the molecule has just two methyl branches.

The same molecule with its longest chain (six carbons) drawn straight.

Worked example

Name an alkane whose longest chain is hidden

  • Complex familiar
  • Technology free

Give the IUPAC name of CHX3CH(CHX2CHX3)CHX2CH(CHX3)CHX3\ce{CH3CH(CH2CH3)CH2CH(CH3)CH3}.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Trace every end-to-end path; the longest is the stem, even round a bend.

  2. Number from the end that gives the lowest locants at the first difference.

  3. Prefixes in alphabetical order, di- and tri- for repeats, one locant each.

Watch out for

  • "2-ethyl-4-methylpentane": the chain is not the longest.

  • "3,5-dimethylhexane": numbered from the wrong end.

  • "2,4-methylhexane" or "2-4-dimethylhexane": missing di- or a hyphen where a comma belongs.

Interactive

Name it

Type each IUPAC name. The feedback says whether the chain, the locants or the order of the branches is wrong.

Name CHX3CHX2CH(CHX3)CHX2CHX3\ce{CH3CH2CH(CH3)CH2CH3}.

Common mistake

Three ways to lose the naming mark

  • The chain is not the longest. "2-ethylbutane" and "1-methylbutane" are always wrong: an ethyl on carbon 2 or a methyl on carbon 1 makes the chain longer.
  • The locants are not the lowest. CHX3CH(CHX3)CHX2CHX2CHX3\ce{CH3CH(CH3)CH2CH2CH3} is 2-methylpentane, not 4-methylpentane.
  • The branches are out of order. 3-ethyl-2-methylhexane, not 2-methyl-3-ethylhexane; and 2,3-dimethylbutane needs both locants.

Alkenes and alkynes. The chain must contain the double or triple bond, and the bond gets the lowest possible number: the locant of its first carbon goes in front of -ene or -yne. Branches are numbered along the same chain.

Locants go right before the part of the name they describe.
StructureNameWhy
CHX2=CHCHX2CHX3\ce{CH2=CHCH2CH3}but-1-enethe C=C starts at carbon 1
CHX3CH=CHCHX3\ce{CH3CH=CHCH3}but-2-enethe C=C starts at carbon 2 from either end
CHX2=C(CHX3)CHX3\ce{CH2=C(CH3)CH3}2-methylpropene (also written 2-methylprop-1-ene)a three-carbon chain has only one place for the C=C, so its locant is often left out
CHX3C≡CCHX2CHX3\ce{CH3C#CCH2CH3}pent-2-ynenumbering from the left gives the triple bond 2, not 3
CHX2=CHCH(CHX3)CHX3\ce{CH2=CHCH(CH3)CH3}3-methylbut-1-enethe C=C takes priority for the lowest number, so the methyl is on 3

Note

Older names you may meet

Some textbooks and past papers write the locant first: 2-butene for but-2-ene, 1-pentyne for pent-1-yne. Both are understood, but write the current IUPAC form, with the locant right before -ene or -yne.

Name CHX3CHX2CH=CHCHX3\ce{CH3CH2CH=CHCH3}. (Ignore cis and trans for now.)

Name CH≡CCH(CHX3)CHX3\ce{CH#CCH(CH3)CH3}.

From a name to a structure. Work backwards: draw the chain from the stem, number it, put in the multiple bond, add the branches, then fill every carbon up to four bonds with hydrogens.

Worked example

Draw 4-methylpent-2-yne from its name

  • Simple familiar
  • Technology free

Draw the displayed structural formula of 4-methylpent-2-yne, write its condensed structural formula and give its molecular formula.

The structure the name describes.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Stem → chain; suffix and its locant → multiple bond; prefixes → branches.

  2. Fill each carbon to four bonds with H.

  3. Check the formula against the general formula of the series.

Watch out for

  • Putting hydrogens on the triple-bonded carbons (each already has four bonds).

  • Putting the methyl on carbon 4 counted from the wrong end, which gives 2-methylpent-3-yne, not a valid name.

Exam tip

Check your name by redrawing it

After naming a structure, draw the structure your name describes and compare. If your chain or numbering was wrong, the redrawn molecule will have a different shape or a longer chain somewhere. It takes thirty seconds and catches most naming errors.

Summary

  • Name = branches (prefix) + longest chain (stem) + group (suffix): 3-methylpent-1-ene.

  • Find the longest continuous chain, including any C=C or C≡C, even if the drawing bends it.

  • Number from the end that gives the multiple bond the lowest locant, then the branches.

  • Branches go in alphabetical order with di-, tri- and one locant each: 3-ethyl-2,2-dimethylpentane.

  • Commas between numbers, hyphens between numbers and letters, no spaces.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 140% read

Save your progress with a free account