Lesson 11 of 14 · 20 min
Polymers: structure and properties
Describe the structures of polyethene, polypropene, PTFE, PLA, nylon and polyester, relate strength, density and biodegradability to structure, and judge how green a polymer is with atom economy.
What you will be able to do
- Draw the repeating units of polyethene, polypropene, PTFE, PLA, nylon and a polyester.
- Explain the differences between LDPE and HDPE in terms of branching and packing.
- Describe isotactic, syndiotactic and atactic polypropene and their properties.
- Relate strength, density and biodegradability to chain structure and intermolecular forces.
- Calculate atom economy and use it to compare how green two processes are.
A milk bottle and a supermarket bag are both made of polyethene, , yet one is stiff and opaque and the other is soft and stretchy. The repeating unit is identical. What differs is how the long chains are shaped and how closely they pack, and that is the key to every property in this lesson.
Definition
Polymers and repeating units
A polymer is a very long molecule built from many small monomers joined by covalent bonds. Its structure is written as the repeating unit in brackets with , with the bonds at each end extending through the brackets.
- Addition polymers (polyethene, polypropene, PTFE) form when C=C bonds open; the backbone is all C–C bonds.
- Condensation polymers (polyesters, PLA, nylon) form when monomers join and release water; the backbone contains ester or amide links.
| Polymer | Monomer | Link in the backbone | Key feature |
|---|---|---|---|
| polyethene (LDPE, HDPE) | ethene | C–C | non-polar chains, dispersion forces only |
| polypropene | propene | C–C | a group on every second carbon |
| PTFE (Teflon) | tetrafluoroethene | C–C | every H replaced by F |
| PLA, poly(lactic acid) | lactic acid (2-hydroxypropanoic acid) | ester | made from plant sugars; biodegradable |
| nylon-6,6 (a polyamide) | hexane-1,6-diamine + hexanedioic acid | amide | hydrogen bonds between chains |
| polyester (PET) | ethane-1,2-diol + benzene-1,4-dicarboxylic acid | ester | strong, rigid fibres and bottles |
Polypropene: a methyl group on every second carbon of the chain.
PTFE: a carbon backbone sheathed in fluorine atoms.
LDPE and HDPE. Both are polyethene. Made at high pressure, low-density polyethene has many side branches, so its chains cannot line up closely. Made at low pressure with a catalyst, high-density polyethene has almost no branches, and its chains pack tightly in ordered (crystalline) regions.
Compare the branched LDPE chains with the straight HDPE chains. Watch the density and strength readouts.
| Property | LDPE | HDPE |
|---|---|---|
| chain shape | branched | almost unbranched |
| packing | loose, mostly amorphous | close, highly crystalline |
| density | about | about |
| dispersion forces between chains | weaker | stronger |
| strength and stiffness | soft, flexible, stretchy | stronger, rigid |
| melting point | lower (about ) | higher (about ) |
| uses | cling wrap, squeeze bottles, bags | milk bottles, pipes, crates |
Worked example
Explain why HDPE is denser and stronger than LDPE
LDPE and HDPE are both polyethene, yet HDPE (density ) is used for rigid milk bottles and LDPE () for soft cling wrap. Explain the difference in density and strength in terms of structure.
Step 1: Describe the structures
LDPE chains have many side branches. HDPE chains are almost unbranched.
Step 2: Link structure to packing
Straight HDPE chains can line up closely in ordered, crystalline regions; branched LDPE chains cannot get close.
Step 3: Explain the density
Closer packing puts more mass in each cubic centimetre, so HDPE is denser.
Step 4: Explain the strength
Polyethene chains are non-polar and attract each other by dispersion forces, which act only over short distances. Closely packed HDPE chains have a larger area of contact, so the dispersion forces between them are stronger: HDPE is stronger and more rigid, with a higher softening point.
Try it yourself first, then check the working one step at a time.
Answer
HDPE's unbranched chains pack closely, making it denser and giving stronger dispersion forces between chains, so it is stronger and more rigid. LDPE's branched chains pack loosely, so it is less dense, weaker and more flexible.
Method
Structure: branching, side groups, links.
Packing: how close the chains get.
Forces: which intermolecular force, and how strong given the packing.
Property: density, strength, melting point.
Watch out for
Saying the covalent bonds in HDPE are stronger: the C–C and C–H bonds are identical.
"HDPE is denser because it is high density": a circular answer with no structure.
Polypropene tacticity. Every second carbon of polypropene carries a group. Along a zig-zag chain those groups can sit in three ways. (The syllabus prints "syntactic"; the chemical term is syndiotactic.)
| Form | Arrangement of the CH₃ groups | Structure and properties |
|---|---|---|
| isotactic | all on the same side of the chain | regular, chains pack closely: crystalline, strong, rigid, high melting (about ); most commercial polypropene |
| syndiotactic | alternating sides along the chain | regular, packs well: crystalline and strong, though less crystalline and lower melting (about ) than isotactic |
| atactic | random | irregular, cannot pack: amorphous, soft and weak, sticky or rubbery |
Switch between the three arrangements and watch the chains pack.
Why is atactic polypropene softer and weaker than isotactic polypropene?
PTFE (polytetrafluoroethene, Teflon) has a carbon chain completely sheathed in fluorine atoms. The C–F bond is one of the strongest single bonds, and the fluorine sheath shields the chain, so PTFE is chemically unreactive and withstands high temperatures. Its surface attracts almost nothing, so it is non-stick and slippery. The heavy fluorine atoms also make it dense, about .
Condensation polymers have polar links in the backbone. Nylon-6,6 is a polyamide: the N–H and C=O of neighbouring chains form hydrogen bonds, so nylon makes very strong fibres. Polyesters such as PET have C=O dipoles between chains and make strong fibres and bottles. PLA is a polyester made from lactic acid, which comes from fermenting plant sugars.
PLA, poly(lactic acid). Its backbone ester links can be hydrolysed, so it biodegrades in industrial compost.
Nylon-6,6. The amide links () hydrogen bond to neighbouring chains.
Key idea
Linking properties to structure
- Strength rises with longer chains, stronger forces between chains (dispersion < dipole–dipole < hydrogen bonds), closer packing (unbranched, isotactic, crystalline) and cross-links.
- Density rises with closer packing and heavier atoms (HDPE > LDPE; PTFE is densest).
- Biodegradability needs a backbone that water and microorganisms can break: ester and amide links can be hydrolysed (PLA, some polyesters). An all-C–C backbone (polyethene, polypropene, PTFE) cannot, so these persist for centuries.
Select the polymers whose backbones contain links that can be hydrolysed, making biodegradation possible.
Green polymers. Most plastics have a large ecological footprint: they are made from crude oil and gas, and they do not biodegrade, so they accumulate in landfill and the oceans. Sustainable polymers are made from renewable sources: PLA from corn starch or sugarcane, bio-polyethene from sugarcane ethanol, and polyhydroxyalkanoates (PHAs) made by bacteria fed on waste products or waste gases. Being bio-based and being biodegradable are separate questions: bio-polyethene is renewable but no more biodegradable than polyethene from oil.
Atom economy measures how much of the reactants ends up in the product you want. The higher it is, the less waste, and the greener the process.
Worked example
Compare the atom economy of two routes to chloroethane
Chloroethane can be made by (1) in UV light, or (2) . Calculate the atom economy of each route and state which is greener. Use the data book's relative atomic masses.
Step 1: Molar masses
, , , , .
Step 2: Route 1
Step 3: Route 2
In an addition reaction every atom of the reactants ends up in the one product.
Step 4: Compare
Route 2 wastes no atoms. Route 1 also makes HCl as a by-product and, as a substitution, a mixture of more highly chlorinated products, so its real yield of chloroethane is lower still.
Try it yourself first, then check the working one step at a time.
Answer
Route 1: 63.9%; route 2: 100%. The addition route is greener.
Method
Write the balanced equation.
Atom economy = M(desired product) ÷ total M(reactants) × 100%.
Addition reactions: 100%. Substitution and condensation: less.
Watch out for
Confusing atom economy with percentage yield: atom economy comes from the equation, not from measured masses.
Leaving a coefficient out of the total mass of reactants.
Forming PLA joins lactic acid molecules and releases water: for each unit, (unit of polymer). Calculate the atom economy of forming PLA, to three significant figures. (: , .)
Exam tip
Explaining a property
Link three things: the structure (branched or not, the side group's position, the link in the backbone), the forces between chains (which force, how close the packing) and the property (stronger, denser, higher melting, biodegradable). "HDPE is stronger because it is high density" is circular and earns nothing.
Summary
Addition polymers (polyethene, polypropene, PTFE) have all-C–C backbones; condensation polymers (PLA, nylon, polyester) have ester or amide links.
HDPE's unbranched chains pack closely: denser, stronger, higher melting than branched LDPE.
Isotactic and syndiotactic polypropene are regular and crystalline; atactic is amorphous and weak.
PTFE: strong C–F bonds and a fluorine sheath make it unreactive, non-stick and dense. Nylon's hydrogen bonds make strong fibres.
Hydrolysable backbone links allow biodegradation. Renewable feedstocks and high atom economy make a process greener.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.