Lesson 10 of 14 · 18 min

Planning reaction pathways

Use the data book's reaction-pathways map to plan multi-step syntheses with reagents, conditions and equations, classify each step, and interpret chemical tests to identify compounds.

What you will be able to do

  • Read the reaction-pathways map in the data book and give the reagents and conditions for each arrow.
  • Classify each step as addition, substitution, elimination or redox.
  • Plan a synthesis of two or three steps from a starting material to a target.
  • Interpret the results of bromine water and oxidising-agent tests.

The data book's first page has a map: alkane, alkene, haloalkane, alcohol, aldehyde, ketone, carboxylic acid, ester, amine and amide joined by arrows. It does not give the reagents or conditions. Those are yours to know, and with them the map becomes a route planner: to get from propene to propanone, find both on the map and follow the arrows.

Interactive

The reaction-pathways map

Click each arrow for its reagents, conditions, reaction type and equation. The dashed arrows are syllabus reactions the printed map leaves out.

Every arrow on the map, with the reagents and conditions to learn.
From → toReagents and conditionsType
alkane → haloalkaneXX2\ce{X2}, UV lightsubstitution
haloalkane → dihaloalkaneXX2\ce{X2}, UV lightsubstitution
alkene → dihaloalkaneXX2\ce{X2}, room temperatureaddition
alkene → haloalkaneHX, room temperature (Markovnikov)addition
haloalkane → alkeneNaOH in ethanol, heatelimination
alkene → alkaneHX2\ce{H2}, Ni catalyst, heataddition (reduction)
alkene → poly(alkene)heat, pressure, catalystaddition polymerisation
alkene → alcoholHX2O(g)\ce{H2O(g)}, HX3POX4\ce{H3PO4} catalyst, 300 °C300\,°\mathrm{C}, 6 MPa6\unit{MPa} (Markovnikov)addition
haloalkane → alcohol (not drawn)NaOH(aq)\ce{NaOH(aq)}, heat under refluxsubstitution
alcohol → haloalkane (not drawn)HX (or NaX + conc. HX2SOX4\ce{H2SO4}), heatsubstitution
primary alcohol → aldehydeacidified KX2CrX2OX7\ce{K2Cr2O7}, warm, distil off the aldehydeoxidation (redox)
aldehyde → carboxylic acidacidified KX2CrX2OX7\ce{K2Cr2O7} or KMnOX4\ce{KMnO4}, heat under refluxoxidation (redox)
secondary alcohol → ketoneacidified KX2CrX2OX7\ce{K2Cr2O7} or KMnOX4\ce{KMnO4}, heatoxidation (redox)
carboxylic acid + alcohol → esterconc. HX2SOX4\ce{H2SO4}, heat under reflux (reversible)condensation
haloalkane → amineexcess NHX3\ce{NH3} in ethanol, heat in a sealed tubesubstitution
carboxylic acid + amine → amideheatcondensation

Note

Where condensation fits

The syllabus classifies reactions as addition, elimination, substitution or redox. Esterification and amide formation are condensation reactions; in that four-way scheme they count as substitution, because the −OH\ce{-OH} of the acid is replaced by −OR\ce{-OR} or −NHR\ce{-NHR}.

Classify the conversion of 2-bromobutane into but-2-ene by heating with sodium hydroxide in ethanol.

Choose one answer

Planning a synthesis

  1. Identify the start and target classes

    Name each and find them on the map.

  2. Count the carbons

    Apart from polymerisation (and combustion, which destroys the molecule), none of these reactions makes or breaks a C–C bond. Esterification and amide formation join two molecules through an O or N, not a new C–C bond. So if the target has the same carbon skeleton as the start, every step keeps it; if it has twice the carbons and an ester link, it was made from two pieces.

  3. Work backwards from the target

    Ask "what makes this class?" until you reach the starting class. Ketone ← secondary alcohol ← alkene (water, Markovnikov) or haloalkane.

  4. Check positions

    Make sure each step puts the group on the right carbon: Markovnikov additions, and primary vs secondary alcohols, decide which oxidation product you get.

  5. Write each step

    Structure and name of each intermediate, reagents and conditions over each arrow, and a balanced equation.

Worked example

Synthesise propanone from propene

  • Complex familiar
  • Technology free

Propose a two-step synthesis of propanone from propene. Give the reagents and conditions, an equation and the name of the intermediate for each step.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Identify what class makes the target, and work backwards.

  2. Check that each step puts the group on the right carbon.

  3. Give reagents and conditions for every step.

Watch out for

  • Going via propan-1-ol, which gives propanal or propanoic acid.

  • Leaving out the catalyst or conditions of the hydration.

Put the steps in order to make propanoic acid from 1-chloropropane.

Drag the handles, or use the arrow buttons, to put these in order.

  1. Heat propanal with more acidified dichromate under reflux to form propanoic acid.
  2. Heat 1-chloropropane with aqueous sodium hydroxide under reflux to form propan-1-ol.
  3. Warm propan-1-ol with acidified potassium dichromate(VI) to form propanal.

Worked example

Make ethyl ethanoate using ethene as the only organic starting material

  • Complex unfamiliar
  • Technology free

A student has ethene and any inorganic reagents. Design a synthesis of ethyl ethanoate, CHX3COOCHX2CHX3\ce{CH3COOCH2CH3}, giving the reagents, conditions and organic product of each step.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Split an ester target into its acid and alcohol.

  2. Make each from the starting material.

  3. Join them, and comment on the yield of the reversible step.

Watch out for

  • Distilling during the oxidation, which stops at ethanal.

  • Trying to make the ester in one step from ethene.

Interactive

Plan a route

Choose an arrow from the current compound at each step. The widget names each product and checks the route.

Interpreting tests. Chemical tests answer yes-or-no questions about functional groups, so a sequence of tests narrows down an unknown.

What each test tells you.
TestPositive resultMeans
bromine waterorange-brown → colourless, fast, in the darkC=C present (alkene)
acidified KX2CrX2OX7\ce{K2Cr2O7}, warmorange → greenprimary or secondary alcohol, or an aldehyde
acidified KMnOX4\ce{KMnO4}, warmpurple → colourlessprimary or secondary alcohol, or an aldehyde (also C=C)
the oxidation product with blue litmus or NaX2COX3\ce{Na2CO3}litmus turns red; fizzingan acid formed: the alcohol was primary
NaX2COX3\ce{Na2CO3} or NaHCOX3\ce{NaHCO3} on the original compoundfizzing (COX2\ce{CO2})carboxylic acid

Common mistake

Permanganate and alkenes

Permanganate also reacts with C=C bonds. Use bromine water to test for an alkene first; only use permanganate to classify alcohols in compounds you already know have no C=C.

Compound X has the formula CX4HX10O\ce{C4H10O}. It does not decolourise bromine water. When it is heated under reflux with excess acidified dichromate, the mixture turns from orange to green, and the organic product does not react with sodium carbonate. Which could X be?

Choose one answer

Exam tip

Pathway questions

Draw or name every intermediate, write the reagent and condition for every step (a catalyst, heat, reflux, UV light, aqueous or ethanolic), and check Markovnikov and the alcohol class at each step. When asked for an equation, balance it and include inorganic by-products such as HX2O\ce{H2O}, HX or NaX.

Summary

  • The data book map shows which classes connect; the reagents and conditions must be learned.

  • Classify steps as addition, substitution, elimination or redox (oxidation and reduction); esterification and amide formation are condensations.

  • Plan backwards from the target, keep track of carbon count and positions, and write reagents and conditions for each step.

  • Bromine water detects C=C; acidified dichromate (orange → green) and permanganate (purple → colourless) detect 1° and 2° alcohols; test the product to tell 1° from 2°.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 10 of 140% read

Save your progress with a free account