Lesson 9 of 12 · 15 min
Electrolytic cells and molten salts
Explain how an electrolytic cell uses an external power supply to drive a non-spontaneous reaction, identify its components, tell it apart from a galvanic cell, and predict the products of electrolysing a molten salt.
What you will be able to do
- Identify that an electrolytic cell uses an external potential difference to drive a non-spontaneous redox reaction.
- Identify the components of an electrolytic cell and the sign of each electrode.
- Discriminate between galvanic and electrolytic cells.
- Determine the products of electrolysing a molten salt and write the electrode half-equations.
Sodium is far too reactive to be found as the metal in nature, and no chemical reducing agent on the table is strong enough to make it from ions cheaply. The answer is to push the electrons onto the ions with a power supply. Reversing a spontaneous reaction this way is electrolysis, and it is how sodium, aluminium, chlorine and pure copper are made, and how a phone battery is recharged.
Key idea
Electrolytic cells
An electrolytic cell uses an external electrical potential difference (a DC power supply) to provide the energy for a non-spontaneous redox reaction. Its essential components are:
- a source of electric current, such as a battery or DC power supply, and conducting wires
- two electrodes: the anode, joined to the positive terminal, where oxidation happens, and the cathode, joined to the negative terminal, where reduction happens
- an electrolyte: a molten ionic compound or a solution of ions, which conducts because its ions can move
Both electrodes usually sit in the same electrolyte, so there is no salt bridge.
Electrolysis of molten sodium chloride. The supply pulls electrons from the anode and pushes them onto the cathode.
Common mistake
The anode is not always negative
In a galvanic cell the anode is negative; in an electrolytic cell it is positive, because it is joined to the positive terminal of the supply, which pulls electrons out of it. What never changes: oxidation at the anode, reduction at the cathode, and electrons flowing through the external circuit from anode to cathode.
| Feature | Galvanic cell | Electrolytic cell |
|---|---|---|
| Reaction | spontaneous, | non-spontaneous, |
| Energy | chemical to electrical | electrical to chemical |
| Anode (oxidation) | negative | positive (joined to + terminal) |
| Cathode (reduction) | positive | negative (joined to − terminal) |
| Set-up | two half-cells joined by a salt bridge | one electrolyte, both electrodes in it, a power supply |
| Example | a battery running a torch | recharging a battery, electroplating, extracting sodium |
Which statement is true of an electrolytic cell but not of a galvanic cell?
Compare molten lead(II) bromide with molten sodium chloride. In a molten salt there is nothing else to react, so the cation is reduced and the anion oxidised.
Molten salts. A molten ionic compound contains only its own ions, so the products are easy to predict: the metal cation is reduced at the cathode and the non-metal anion is oxidised at the anode. The salt must be molten (or dissolved) because ions in a solid lattice can't move to the electrodes.
Worked example
Electrolysis of molten lead(II) bromide
Lead(II) bromide is heated until it melts and is then electrolysed with graphite electrodes.
(a) State the product at each electrode and write the half-equations, with state symbols.
(b) Write the overall equation.
(c) Explain why no current flows until the solid has melted.
Step 1: List the ions
Molten contains only and ions.
Step 2: Cathode (negative)
Lead ions are attracted to the cathode and reduced: . Molten lead collects at the bottom.
Step 3: Anode (positive)
Bromide ions are attracted to the anode and oxidised: . Red-brown bromine vapour forms.
Step 4: Overall
Both half-equations involve two electrons, so add them:
Step 5: Why molten
In the solid, the ions are held in fixed positions in the lattice, so they cannot move to the electrodes and carry charge. Melting frees them.
Try it yourself first, then check the working one step at a time.
Answer
(a) Cathode: lead, . Anode: bromine, . (b) . (c) The ions in solid cannot move; once molten they can carry charge to the electrodes.
Method
In a molten salt, the metal cation is reduced at the cathode and the anion oxidised at the anode.
Balance each half-equation, then add with equal electrons.
Watch out for
Writing instead of : bromine is diatomic.
Putting lead at the anode by remembering the galvanic cell, where the anode is negative. Here the cathode is joined to the negative terminal: it attracts the ions and reduces them.
Magnesium is made by electrolysing molten magnesium chloride. Write the half-equation for the reaction at the cathode, with state symbols.
Industrial scale. Australia is one of the world's two largest bauxite producers, and smelters in Queensland, New South Wales, Victoria and Tasmania turn alumina refined from it into aluminium. Aluminium oxide, dissolved in molten cryolite at about , is electrolysed: is reduced to molten aluminium at the carbon-lined cathode, and oxide ions are oxidised at carbon anodes, which burn away as carbon dioxide. Each tonne of aluminium needs roughly to of electricity, so smelters are built where large, reliable supplies of power are available.
Exam tip
Name the components
"Identify the essential components" means: the power source and conducting wires, the anode (positive, oxidation) and cathode (negative, reduction), and the electrolyte. Say what the electrolyte is and why it conducts (mobile ions).
Summary
An electrolytic cell uses an external potential difference to drive a non-spontaneous redox reaction, turning electrical energy into chemical energy.
Components: power supply and wires, anode (joined to +, oxidation), cathode (joined to −, reduction) and an electrolyte with mobile ions.
In every cell, oxidation is at the anode and reduction at the cathode; only the signs of the electrodes change between galvanic and electrolytic cells.
Electrolysing a molten salt reduces the metal ion at the cathode and oxidises the non-metal ion at the anode.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.