Lesson 10 of 12 · 20 min
Electrolysis of aqueous solutions
State the factors that decide the products of electrolysis, explain the products for dilute and concentrated sodium chloride and copper(II) sulfate, and describe electroplating and copper refining.
What you will be able to do
- State the factors that affect the products of electrolysis.
- Explain the products of electrolysing dilute and concentrated sodium chloride solution and copper(II) sulfate solution.
- Describe electroplating and the purification of copper.
Electrolyse molten sodium chloride and you get sodium and chlorine. Electrolyse salt water and you get no sodium at all: hydrogen bubbles off the cathode instead. The difference is the water. In an aqueous solution, water molecules are at both electrodes, and they can be reduced or oxidised too. Whichever species reacts most easily wins.
Key idea
Predicting products in aqueous solution
- List every species present: the cations, the anions, water and the electrodes themselves.
- Cathode (reduction): the strongest oxidising agent is reduced, the one with the highest . Compare the cation with water, , .
- Anode (oxidation): the strongest reducing agent is oxidised, the one whose couple has the lowest . Compare the anion and the anode metal with water, (reverse of ).
- Then allow for concentration and the electrode material.
| Factor | Effect | Example |
|---|---|---|
| State of the electrolyte | In a molten salt only its own ions can react. In water, water can be reduced or oxidised instead. | Molten NaCl gives Na; NaCl(aq) gives . |
| Relative values | The strongest oxidising agent is reduced at the cathode and the strongest reducing agent oxidised at the anode. | () is reduced before water (). |
| Concentration | A high concentration of an ion makes it more likely to react, even when its is slightly less favourable. | Concentrated NaCl(aq) gives ; dilute gives . |
| Nature of the electrodes | An inert electrode (Pt, graphite) does not react. A metal anode may be oxidised itself. | A copper anode dissolves in . |
| Voltage and overpotential | Some gases, especially , need extra voltage to form, which can change which product appears. | The overpotential for helps form. |
Work through dilute and concentrated sodium chloride, then copper(II) sulfate with inert and with copper electrodes. Read the reasons panel each time.
Sodium chloride solution. At the cathode, () is far harder to reduce than water (), so water is reduced to hydrogen gas and hydroxide ions, at any concentration.
At the anode, the candidates are (couple ) and water (couple ). Water's couple is lower, so in dilute solution water is oxidised and oxygen forms. In concentrated solution, chlorine forms instead: the two values are close, the high favours chloride oxidation, and forming oxygen needs a large overpotential.
Dilute
Cathode:
Anode:
Overall, water is split: , with twice the volume of as .
Concentrated
Cathode:
Anode:
Overall: . The solution left behind is sodium hydroxide.
Common mistake
No sodium from salt water
Sodium metal does not form at the cathode in aqueous solution. Water () is a far stronger oxidising agent than (), so water is reduced instead, and any sodium that did form would react with the water at once. The same goes for , , and : these metals are made only from molten compounds.
Worked example
Dilute and concentrated sodium chloride solution
Sodium chloride solution is electrolysed with inert electrodes and a few drops of phenolphthalein indicator.
(a) Explain the product at the cathode, and why the solution around the cathode turns pink.
(b) Explain why the anode product is different for dilute and for concentrated sodium chloride solution.
Step 1: Species at the cathode
Possible oxidising agents: () and water (, ).
Step 2: Cathode product
Water has the higher , so it is the stronger oxidising agent and is reduced: . Hydrogen bubbles form.
Step 3: The pink colour
The reaction produces ions, so the solution near the cathode becomes alkaline and phenolphthalein turns pink.
Step 4: Species at the anode
Possible reducing agents: (couple ) and water (couple ). The inert electrode does not react.
Step 5: Dilute solution
Water's couple is lower, so water is the stronger reducing agent and is oxidised: . Oxygen forms.
Step 6: Concentrated solution
With a high , chloride ions are oxidised instead: . The two values are close, the high concentration of chloride favours its oxidation, and forming oxygen needs a large overpotential.
values assume of each species. Concentration is one of the factors that changes the products.
Try it yourself first, then check the working one step at a time.
Answer
(a) Hydrogen: water () is reduced in preference to (), producing , which turns phenolphthalein pink. (b) In dilute solution water is oxidised to oxygen (its couple, , is lower than chlorine's, ); in concentrated solution the high and the overpotential for oxygen make chloride oxidise to chlorine.
Method
List every species: cations, anions, water, and the electrodes.
Cathode: the species with the highest is reduced. Anode: the species whose couple has the lowest is oxidised.
Then allow for concentration, overpotential and reactive electrodes.
Watch out for
Saying sodium forms at the cathode.
Saying chlorine always forms at the anode in sodium chloride solution.
Copper(II) sulfate solution. With inert electrodes, () is reduced at the cathode in preference to water, so copper plates out. At the anode, sulfate cannot be oxidised (sulfur is already ), so water is oxidised to oxygen and . The blue colour fades as is used up, and the solution becomes acidic:
With a copper anode, the anode metal is the easiest thing to oxidise (, couple , is oxidised before water, ). Copper dissolves from the anode as fast as it plates onto the cathode, so and the blue colour stay the same.
Copper(II) sulfate solution is electrolysed with graphite electrodes. What forms at the anode?
Electroplating. To coat an object with a metal, make the object the cathode, use the plating metal as the anode, and use a solution of the plating metal's ions as the electrolyte. Metal ions are reduced onto the object, and the anode dissolves to replace them. Silver-plated cutlery, nickel-plated fittings and gold-plated jewellery are made this way. (Chrome plating is the exception: it uses a chromium compound in the electrolyte and an anode that does not dissolve.)
Purifying copper. Copper for wiring must be over 99.9% pure. Blocks of impure copper are the anodes and thin sheets of pure copper the cathodes, in acidified copper(II) sulfate. At a low voltage, copper and the more reactive impurities (such as zinc, iron and nickel) are oxidised at the anode, but only is reduced at the cathode, because it is the strongest oxidising agent present. The more reactive metal ions stay in solution. Less reactive metals, such as silver, gold and platinum, are not oxidised at all; they fall to the bottom as anode sludge, which is valuable enough to be refined itself.
An impure copper anode contains small amounts of zinc and silver. During electrolytic refining, what happens to these two impurities?
Investigate: factors that affect electrolysis, and electroplating. Electrolyse sodium chloride solutions of different concentrations between graphite electrodes, and test the anode gas: chlorine turns damp blue litmus paper red and then bleaches it, while oxygen relights a glowing splint. To investigate electroplating, weigh a cleaned copper cathode, plate it at a constant current for a measured time, then rinse, dry and reweigh it. Vary one factor at a time, such as current, time or concentration, and control the others: electrode area and separation, temperature and the cleanliness of the cathode.
Exam tip
Explain, don't just state
For "explain the products" questions: list the species present at each electrode, compare their values, state which reacts and why, mention concentration or the electrode where it matters, and give each half-equation. "Hydrogen forms because water () is a stronger oxidising agent than ()" scores; "hydrogen forms" alone does not.
Summary
Products depend on the state of the electrolyte, the relative values, concentration, the electrode material and overpotential.
At the cathode in water: a cation with above (such as , ) is reduced; otherwise water gives and .
At the anode: a metal anode that is easier to oxidise than water, such as copper, is oxidised itself; with an inert anode, iodide and bromide are oxidised, chloride only when concentrated, and otherwise water gives and . Sulfate and nitrate are not oxidised.
Dilute NaCl(aq) gives and ; concentrated NaCl(aq) gives and ; with inert electrodes gives Cu and .
Electroplating puts the object at the cathode; refining puts impure copper at the anode and pure copper at the cathode.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.