Lesson 6 of 12 · 20 min

Galvanic cells

Explain how a galvanic cell turns a spontaneous redox reaction into electricity, identify the anode, cathode, electron flow and salt bridge ions, and write cell diagrams.

What you will be able to do

  • Explain that a galvanic cell generates a potential difference from a spontaneous redox reaction.
  • Identify the anode (oxidation, negative) and cathode (reduction, positive), and the direction of electron flow.
  • Explain the role of the salt bridge and the movement of its ions.
  • Write a cell diagram with its half-equations, and sketch and label a galvanic cell.

When zinc reacts with copper(II) sulfate in one beaker, electrons jump straight from zinc atoms to copper ions on the metal's surface, and the energy is released as heat. Separate the two half-reactions into different containers and join them with a wire, and the electrons have to travel through the wire to get from the zinc to the copper ions. A moving stream of electrons is an electric current. That is a galvanic cell: every battery works this way.

Interactive

Build a galvanic cell

Watch the electrons in the wire and the ions in the salt bridge. Then change the half-cells.

Key idea

Galvanic cells

A galvanic cell generates an electrical potential difference from a spontaneous redox reaction. It has two half-cells joined by an external circuit (the wire) and a salt bridge.

  • The anode is where oxidation happens. In a galvanic cell it is the negative electrode, because the electrons released there build up on it.
  • The cathode is where reduction happens. In a galvanic cell it is the positive electrode, because electrons are drawn off it by the ions being reduced.
  • Electrons flow through the wire from the anode to the cathode.

A memory aid: An Ox, Red Cat (anode oxidation, reduction cathode).

A zinc–copper galvanic cell. Electrons flow through the wire; ions move through the salt bridge.

Anode (−): Zn(s)→ZnX2+(aq)+2 eX−Cathode (+): CuX2+(aq)+2 eX−→Cu(s)\text{Anode } (-):\ \ce{Zn(s) -> Zn^2+(aq) + 2e-} \qquad \text{Cathode } (+):\ \ce{Cu^2+(aq) + 2e- -> Cu(s)}

The salt bridge. As the cell runs, zinc ions pour into the left beaker and copper ions leave the right one. Without anything else, the left solution would become positively charged and the right one negatively charged, and the current would stop almost at once. The salt bridge is a tube or a strip of filter paper soaked in an unreactive electrolyte such as potassium nitrate. Its ions drift out to balance the charges: anions (NOX3X−\ce{NO3-}) move towards the anode half-cell, and cations (KX+\ce{K+}) move towards the cathode half-cell. This completes the circuit.

The salt bridge's ions must not react with either half-cell. Potassium chloride would precipitate silver chloride in a silver half-cell, so potassium nitrate is the usual choice.

In the zinc–copper cell above, which statement about charge movement is correct?

Choose one answer

Common mistake

No electrons in the salt bridge

Electrons travel only through the metal wire and electrodes. In the salt bridge and the solutions, charge is carried by moving ions. A diagram with electrons drawn through the salt bridge loses the mark.

Cell diagrams. A galvanic cell can be written as a one-line cell diagram, with the anode on the left and the cathode on the right. A single vertical line is a boundary between phases (solid electrode and solution) and a double line is the salt bridge:

Zn(s) ∣ ZnX2+(aq) ∣∣ CuX2+(aq) ∣ Cu(s)\ce{Zn(s) | Zn^2+(aq) || Cu^2+(aq) | Cu(s)}

Read it left to right and it follows the electrons' story: zinc is oxidised to zinc ions, and across the bridge copper ions are reduced to copper.

When neither form of a couple is a metal, as for FeX3+\ce{Fe^3+} and FeX2+\ce{Fe^2+}, the electrode is an inert conductor, usually platinum. Both ions are in the same solution, separated by a comma:

Zn(s) ∣ ZnX2+(aq) ∣∣ FeX3+(aq),FeX2+(aq) ∣ Pt(s)\ce{Zn(s) | Zn^2+(aq) || Fe^3+(aq), Fe^2+(aq) | Pt(s)}

Worked example

A magnesium–iron galvanic cell

  • Complex familiar

A galvanic cell is built from a magnesium strip in 1.0 mol L−11.0\unit{mol\,L^{-1}} MgSOX4(aq)\ce{MgSO4(aq)} and an iron strip in 1.0 mol L−11.0\unit{mol\,L^{-1}} FeSOX4(aq)\ce{FeSO4(aq)}, joined by a wire and a salt bridge of KNOX3(aq)\ce{KNO3(aq)}.

Identify the anode and cathode with their signs and half-equations, state the direction of electron flow and of ion movement in the salt bridge, write the cell diagram and calculate Ecell∘E^\circ_\text{cell}.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Higher E∘E^\circ: cathode, reduction, positive. Lower E∘E^\circ: anode, oxidation, negative.

  2. Electrons: anode to cathode through the wire. Anions to the anode, cations to the cathode in the salt bridge.

  3. Cell diagram: anode on the left, salt bridge as ||.

  4. Ecell∘=Ered∘−Eox∘E^\circ_\text{cell} = E^\circ_\text{red} - E^\circ_\text{ox}.

Watch out for

  • Choosing the cathode as the half-cell with the "bigger number" ignoring signs: −2.36-2.36 is lower than −0.44-0.44.

  • Drawing electrons through the salt bridge.

A cell is written Ni(s) ∣ NiX2+(aq) ∣∣ AgX+(aq) ∣ Ag(s)\ce{Ni(s) | Ni^2+(aq) || Ag+(aq) | Ag(s)}. Write the half-equation for the reaction at the cathode, with state symbols.

Reads asYour answer shows here as chemistry.

Sketching and labelling a galvanic cell

  1. Two half-cells

    Each electrode in a solution of its own ions, e.g. Zn in Zn(NOX3)X2(aq)\ce{Zn(NO3)2(aq)} and Cu in Cu(NOX3)X2(aq)\ce{Cu(NO3)2(aq)}, 1 mol L−11\unit{mol\,L^{-1}}. Label the metals and the solutions.

  2. The external circuit

    A wire joining the electrodes, with a voltmeter (or a bulb) in it.

  3. The salt bridge

    Dipping into both solutions, labelled with its electrolyte, e.g. KNOX3(aq)\ce{KNO3(aq)}.

  4. Anode and cathode

    Label the anode (−-, oxidation) and cathode (++, reduction), with their half-equations.

  5. Flows

    An arrow for electrons along the wire from anode to cathode, and arrows for anions towards the anode and cations towards the cathode in the salt bridge.

Investigate: galvanic cells. Cut strips of magnesium, zinc, iron and copper, sand them clean, and stand each in a beaker of 1.0 mol L−11.0\unit{mol\,L^{-1}} solution of its own nitrate. Join pairs of half-cells with a filter-paper salt bridge soaked in KNOX3(aq)\ce{KNO3(aq)} and a voltmeter. The metal joined to the voltmeter's negative (COM) terminal when the reading is positive is the anode. Measured voltages usually come out a little below the data book's predictions, for reasons the next lesson explains.

Exam tip

Labels that score

For a "sketch and label" galvanic cell question, markers look for: both electrodes and their solutions named, the salt bridge with its electrolyte, the anode marked negative and the cathode positive, an electron-flow arrow on the wire from anode to cathode, and ion movement in the salt bridge. Missing any of these loses a mark.

Summary

  • A galvanic cell generates a potential difference from a spontaneous redox reaction, with its two half-reactions in separate half-cells.

  • Oxidation happens at the anode, which is negative; reduction happens at the cathode, which is positive.

  • Electrons flow through the wire from anode to cathode. In the salt bridge, anions move to the anode half-cell and cations to the cathode half-cell.

  • A cell diagram puts the anode on the left: Zn(s) ∣ ZnX2+(aq) ∣∣ CuX2+(aq) ∣ Cu(s)\ce{Zn(s) | Zn^2+(aq) || Cu^2+(aq) | Cu(s)}. Couples with no metal use an inert platinum electrode.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 120% read

Save your progress with a free account