Lesson 8 of 12 · 18 min
Predicting redox reactions with E°
Use the table of standard electrode potentials and the reactivity series to rank oxidising and reducing agents, predict whether a reaction is spontaneous, and compare galvanic cells.
What you will be able to do
- Rank oxidising agents and reducing agents using standard electrode potentials.
- Predict whether a redox reaction is spontaneous from .
- Predict displacement reactions using values or the reactivity series.
- Analyse cell voltages and other data to compare cells and identify unknown half-cells.
Will chlorine oxidise iodide ions? Will copper dissolve in hydrochloric acid? Will an iron nail coat with copper in copper(II) sulfate? You could test each one, or you could read the answer from one table in the data book.
Key idea
Reading the table of E° values
Each line of the table is , in order of increasing .
- The oxidising agents are on the left. The higher the (further down the table), the stronger the oxidising agent. () is the strongest; () is the weakest.
- The reducing agents are on the right. The lower the (further up the table), the stronger the reducing agent. Li is the strongest; is the weakest.
Key idea
Predicting spontaneity
An oxidising agent reacts spontaneously with a reducing agent when the oxidising agent's half-equation has the higher . Then
In the data book's layout, an oxidising agent on the left reacts with any reducing agent on the right above it.
Pick an oxidising agent and a reducing agent. This ladder puts the highest at the top, the opposite way up to the data book, so here the reaction is spontaneous when the oxidant's couple sits above the reductant's.
Worked example
Will iron(III) oxidise iodide or bromide?
Iron(III) chloride solution is added to separate solutions of potassium iodide and potassium bromide. Use standard electrode potentials to predict whether a reaction occurs in each, and write the equation for any reaction.
Step 1: Identify the agents
can only be reduced (to ), so it is the possible oxidising agent; and are possible reducing agents.
Step 2: Iodide
. Positive, so the reaction is spontaneous.
Step 3: Write the equation
Double the iron half-equation to match the two electrons from : The solution turns brown as iodine forms.
Step 4: Bromide
. Negative, so there is no reaction under standard conditions.
Bromine is a stronger oxidising agent than , so can't take electrons from bromide ions.
Try it yourself first, then check the working one step at a time.
Answer
Iron(III) oxidises iodide (): . It does not react with bromide ().
Method
Identify the oxidising agent (left side of the table) and the reducing agent (right side).
.
Positive means spontaneous under standard conditions; negative means no reaction.
Watch out for
Treating (from the iron(III) chloride) as an oxidising agent. It is already reduced.
Predicting a reaction with bromide because "both ions are halides".
A student drops copper turnings into hydrochloric acid. Using values, predict what happens.
Displacement and the reactivity series. A metal displaces another metal from a solution of its ions when it is the stronger reducing agent: lower , or higher in the data book's reactivity series. Zinc () displaces copper (); copper does not displace zinc. Metals above hydrogen in the series (with negative ) react with acid to give hydrogen; metals below it, such as copper, silver and gold, do not.
The two lists mostly agree, but not entirely. The reactivity series puts potassium and sodium above lithium, because they react faster with water, while the table puts lithium lowest (). predicts which way a reaction can go, not how fast.
Which metal will not displace lead from a solution of lead(II) nitrate?
Comparing cells. The further apart two half-cells are in the table, the larger . Of the half-cells made from Mg, Zn, Fe and Cu, magnesium–copper gives the largest voltage () and zinc–iron the smallest ().
You can also run the formula backwards. If a cell made from an unknown metal X and copper gives with copper as the cathode, then , so : X is lead.
A galvanic cell made from a silver half-cell and an unknown metal M in has . Silver is the cathode. Determine for .
Common mistake
Mixing up the two sides of the table
and Cu are different species. A high makes a moderately good oxidising agent but makes Cu a poor reducing agent. When you predict a reaction, check you are pairing an oxidised form (left side) with a reduced form (right side). Two oxidising agents, like and , can't react with each other.
Exam tip
Explaining spontaneity
A full answer to "predict and explain" has three parts: identify the oxidising and reducing agents with their values, calculate , and conclude ("positive, so the reaction is spontaneous under standard conditions"). Add the half-equations or overall equation if asked.
Summary
Higher : stronger oxidising agent (left side). Lower : stronger reducing agent (right side).
A reaction is spontaneous under standard conditions when .
A metal displaces another from solution when it is the stronger reducing agent; metals with negative react with acid.
The further apart two half-cells are in the table, the larger ; a measured can identify an unknown half-cell.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.